Alçak şasi römorkMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Alçak şasi römork
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
sabit fiyat KDV hariç
€28.500
(€33.915 brüt)
Üretim yılı
2024
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€28.500
(€33.915 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Toplam ağırlık:
- 11.900 kg
- Azami yük ağırlığı:
- 8.620 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 5.500 mm
- Yükleme alanı genişliği:
- 2.420 mm
- Yükleme alanı yüksekliği:
- 500 mm
Teklif detayları
- Listeleme kimliği:
- A112-18-097
- Referans no.:
- 58921
- Son güncelleme tarihi:
- 10.07.2025
Açıklama
* KA-TA-R 11.9:
* 5.5-meter platform body fully finished in RAL 9010 pure white
* Tire Pressure Monitoring System (TPMS)
* Electronic Brake System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 5.5 t Gigant axles
* Parabolic springs with tandem equalization unit
* Height-adjustable (by 300 mm) hot-dip galvanized towing bar with 40 mm flanged towing eye
* Jost mechanical support winch at the front
* Two mechanical hot-dip galvanized folding supports at the rear
* Galvanized steel toolbox, mounted right side
* 15-pin electrical plug
* LED tail lights
* Hot-dip galvanized bolted underride guard
* Galvanized steel toolbox, mounted right side
* Plastic quarter mudguards
* Mesh hooks on the sides and at the rear located at the central locking mounts, plus three on the front wall
* Hot-dip galvanized chassis
* Steel pallet cage body, tipper on three sides
* Continuous side panels without central stanchions, foldable with board side spring-lifters
* Tailgate can be folded down and also swung, with manual central locking
* Hot-dip galvanized screw-in rear stanchions
* Each corner equipped with one 5 t lashing ring; four 3 t lashing rings recessed on each side in the outer frame
* 4 mm steel plate floor
* Mounting rail at rear for loading ramps
* Prepared for later installation of side wall extensions
* Reinforced body with load securing certificate to EN 12642 XL
Ndedpfjm Angvox Aayec
* One pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear integrated into the chassis below the loading area
* Axles, springs, air tanks, towing bar and support winch all painted black
* Platform body color: RAL 9010 pure white
* Painting of the side panels and tipping platform in any RAL color available at extra cost
* Tyres: 235/75R17.5
* Wheelbase: 990 mm
* New vehicle, unregistered, with manufacturer's warranty
* Subject to error and prior sale
* Immediately available ex works Egestorf, A7
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* 5.5-meter platform body fully finished in RAL 9010 pure white
* Tire Pressure Monitoring System (TPMS)
* Electronic Brake System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 5.5 t Gigant axles
* Parabolic springs with tandem equalization unit
* Height-adjustable (by 300 mm) hot-dip galvanized towing bar with 40 mm flanged towing eye
* Jost mechanical support winch at the front
* Two mechanical hot-dip galvanized folding supports at the rear
* Galvanized steel toolbox, mounted right side
* 15-pin electrical plug
* LED tail lights
* Hot-dip galvanized bolted underride guard
* Galvanized steel toolbox, mounted right side
* Plastic quarter mudguards
* Mesh hooks on the sides and at the rear located at the central locking mounts, plus three on the front wall
* Hot-dip galvanized chassis
* Steel pallet cage body, tipper on three sides
* Continuous side panels without central stanchions, foldable with board side spring-lifters
* Tailgate can be folded down and also swung, with manual central locking
* Hot-dip galvanized screw-in rear stanchions
* Each corner equipped with one 5 t lashing ring; four 3 t lashing rings recessed on each side in the outer frame
* 4 mm steel plate floor
* Mounting rail at rear for loading ramps
* Prepared for later installation of side wall extensions
* Reinforced body with load securing certificate to EN 12642 XL
Ndedpfjm Angvox Aayec
* One pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear integrated into the chassis below the loading area
* Axles, springs, air tanks, towing bar and support winch all painted black
* Platform body color: RAL 9010 pure white
* Painting of the side panels and tipping platform in any RAL color available at extra cost
* Tyres: 235/75R17.5
* Wheelbase: 990 mm
* New vehicle, unregistered, with manufacturer's warranty
* Subject to error and prior sale
* Immediately available ex works Egestorf, A7
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu




















































