Standart gövdeli treyler

MAX Trailer 3-(1+2)-Achs-Anhänger-hydr. Rampen

Loading platform:
Cranked loading platform with rear bevel approx. 500 mm x 8°
4 pairs of folding lashing rings on the outside (LC 5,000 daN)
2 pairs of folding lashing rings on the outside (LC 10,000 daN)
2 pairs of flat-mounted lashing rings at the front of the loading platform (LC 5,000 daN)
1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN)
Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering

Axles and Tyres:
BPW axles, air-suspended, fitted with drum brake, equipped with lift/lower function
Axle tool kit
Tyres: 245/70 R 17.5 3PMSF
Load index (146/146F)

One-Piece Steel Ramps:
One pair of galvanized one-piece steel ramps approx. 3,000 x 800 mm with approx. 48 mm thick hardwood covering
Ramp with hydraulic lifting mechanism and hydraulically adjustable
Maximum load per pair: 40,000 kg

Brake System:
Brake system in compliance with EU regulations fitted with EBS-E (2S2M) and EBS coiled cable for the tractor unit

Steel Construction:
Steel construction made from high-strength fine-grained steel
Steel grades:
S355J2+N/S355MC (Yield strength 355MPa)
S690QL/S700MC (Yield strength 690MPa)

Paintwork:
First-class and durable corrosion protection of the pre-shot blasted welded frame guaranteed by a zinc-rich 2-component (2K) primer
A high-quality 2-component (2K) top coat in a single colour, Nova Grey
Rear section metallized and painted in RAL 9010 (Pure White)
Metallic finish not available

Electrical System:
Electrical system in compliance with EU regulations, 24 Volt lighting
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX with sockets 24N, 24S & 15-pin
Connections according to ISO standards:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Pgodjr E Uw Ropfx Agyju

Included Accessories:
Turntable with a +/- 1,750 mm long drawbar, fitted with a towing eye (40 mm diameter)
Coupling height 830-1,010 mm when loaded
Spiral cables 15/ 2x7-pin
Yellow-red air couplings
One mud flap at the rear of the trailer
Manual and description on USB stick
Bracket for rotating beacon at the rear of the trailer
European reflective signs (red-yellow) at the rear of the trailer
Yellow reflective tape as per EU regulations on the sides and at the rear of the trailer
Ramp operating valves mounted on the right side of the trailer
Galvanized supports below the loading platform bevel
Truck hydraulic connection with flow control valve
Cover plates to bridge the gap between ramps and platform
A tool box INOX 1,350 x 400 x 400 mm centrally at the front
Galvanized extensions, extendable by approx. 230 mm per side
Four extendable warning boards approx. 423 x 423 mm (+/- 400 mm), each with a position lamp
Rotating beacon brackets on warning boards
60 km/h speed sticker on the rear
HRM Metallization (High Resistance Metallization) of the outer frame
Complete steel construction shot blasted, then all defined visible areas of the structure are hot-finished by metallization with ZINACOR 850 (Zinc 85% - Aluminum 15%).

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.