Kültivatör

Lemken Smaragd 9/500

Durumu: kullanılmış, çalışma saatleri: 110.000 h, Donanım: kabin, klima, UNIMOG U 400 (0010) Mercedes-Benz Unimog Rodpfx Ajwtuw Ded Tsr (0020) Cabin, air conditioning, air suspension seat, (0030) Sprayer unit (0040) 2x interchangeable platforms, tipper function

Durumu: kullanılmış, makine/araç numarası: 935, boş ağırlık: 10.500 kg, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 41.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.950 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17.5, renk: gri, Üretim yılı: 2021, Donanım: ABS, With every used semi-trailer, you will receive a current and complete inspection and functionality report. Frame: - Steel frame welded construction with a front frame drop and a flat low-bed platform - Frame neck 165 mm with external longitudinal beams for an extended low-bed deck - With a Wirtgen slope on the cranked platform approx. 850 x 65 mm - 2” kingpin - Support for the folded-down rear section when used as a drive-up ramp Front Wall: - Aluminium front wall with beveled corners, 1,000 mm high - Inner front wall completely lined with aluminium checker plate 3/5 mm across entire height and width - Lattice extension above front wall with 2 brackets for attaching lashing chains - Box for steering, electrohydraulic motor, and winch recessed approx. 150 mm (steering and motor boxes stacked vertically) Rodpfx Aeywtwqod Ter Floor: - Grating 30/30/5 mm across the entire loading area in the low bed and on the high bed - For the fold-down rear, main frame grating 40/30/25/5 - Load bars longitudinal to the driving direction, thickness 5 mm, height 30 mm or 40 mm - Grating laid over longitudinal beams, flush with the outer frame Axles and Tyres: - 3 x 10,000 kg BPW air suspension axles with S-cam brakes (300/200 mm), bellows diameter 360 mm - Last axle is self-steering, automatically locking during reverse and can also be manually locked if required - 1st axle liftable (via SmartBoard) - Automatic brake adjuster - Axle spacing 1,310 mm / 1,410 mm - Wabco SmartBoard with ECAS function - Air suspension with raise/lower valve - Tyres 235 / 75 R 17.5 Fold-Down Extension at Rear: - Entire load area behind axle assembly hydraulically folding down - Drive-on ramps can also be placed onto fixed concrete ramps and loaded via ramps (both with extended and retracted extension) - Load capacity of folded-down rear section: - 10 t axle load (5 t wheel load) when horizontal used as loading area - 22 t drive-over capacity when used as drive-up ramp, with support at the rear (underride guard) resting on the ground - Support foot, foldable and height-adjustable - Support foot length designed for ramp loading at a ramp height of 1,100–1,300 mm - Operation via electrohydraulic unit powered by NATO socket from the tractor unit - Pump unit mounted to front wall externally via connectors - Separate wireless remote control for lift table and folding rear operation - Hydraulic controls installed in a stainless steel toolbox 500x350x400 mm, on the right side in the direction of travel before the axle assembly - Rear folding section can also be angled upwards by approx. 60 degrees, thereby shortening the loading area by approx. 1,300 mm - Rear extension: hydraulic 3-section rear extension (approx. 800 mm wide each), extendable by approx. 2,000 mm, operated via hydraulic pump unit Included Accessories: - Hydraulically liftable ramp at the cranked section to access the high-bed across the full vehicle width, 6 t drive-over capacity, without drive-over plate; an angle is welded at the cranked section instead - At the cranked area, vertical scuff protection and top stop for precise positioning when raised - Ramp secured by holding valve - 9 recessed lashing rings fitted longitudinally in the centre of the loading area, plus 1 foldable lashing ring in the centre before the fifth wheel plate - 1 pair of 8 t foldable lashing rings towards the front wall - 2 PVC toolboxes - Wireless remote for hydraulic lift and lowering functions for the lift bed and foldable rear section

Durumu: kullanılmış, Üretim yılı: 2018, çalışma genişliği: 600 mm, Donanım: aydınlatma, basınçlı hava freni, Trailed, hydraulic folding, packer roller / Campbell roller, stone protection, support leg / wheel_____Chassis, hydraulically foldable, spring-loaded stone protection, 4 beams, support wheels, pneumatic brake, drawbar coupling, Campbell roller, location: customer Rsdpfx Aowv Hkzsd Tsr