Üç yöne devirmeli römork

FLIEGL Tandem Dreiseitenkipper TSK118 5m -219

Gross weight: 11,800 kg
Lodpfjwkn Siex Aayohn
Unladen weight: 3,020 kg
Payload: 8,780 kg
Total length: 6,900 mm
Loading length: total platform length 5,000 mm
Width: 2,550 mm
Loading height: 950 mm
Further information

auditional forwarding / preparation ex works 26639 Wiesmoor: €1,280 net

Chassis Central axle tipper trailer
Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipper bearings
Gear support leg at the front
Foldable rear support
Wheel chocks with holder
Steel underrun protection
Full-width rear mudflaps
Quarter shell fenders
Plastic toolbox with intermediate shelf, w=620/h=360/d=440 mm, lockable with padlock.
(Padlock not included)
Note! Sideboard touches toolbox when folded down.
Lockable storage space for loading ramps under the loading platform
Central axle trailer drawbar assembly
Drawbar with tested 40 mm towing eye
Drawbar height-adjustable via spindle, max. adjustment range 300 mm
Axles + suspension
BPW drum brake axles
"Axle/chassis laser alignment" reduces tire and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization
(rocker balancing)
Wheels and tires
235/75 R 17.5"
as supplied by the manufacturer
Steel rims, factory silver
Brake system
2-line compressed air brake system
Color-coded lines for easy servicing.
Hand spindle parking brake
Integral air reservoir
ABS and ALB, with ABS connector at the front with connecting cable.
Caution: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS!
2 non-interchangeable coupling heads at the front, with connection lines to the truck.
Electrics
24 volts, multi-chamber lights, yellow LED side lighting
2 white position lights at the front
2 white/red lane position lights at the rear
2 x 7-pin non-interchangeable plugs at the front, with connecting cable
Hydraulics
Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable,
Low-pressure cylinder up to max. 170 bar, without restrictor. If required, a restrictor must be retrofitted on the truck.
Hydraulic connection with SVK plug NW 10/3, incl. connecting hose
Operation hydraulically via truck PTO
Tipper platform
Robust tipper body with 4 mm steel floor, steel sideboards, continuous sidewalls, fold-down
and pendulum-mounted with central bottom locking. Rear corner stanchions removable. Tailgate foldable and
pendulum-mounted, with central bottom locking.
Platform length approx. 5,000 mm, sideboards with 6 hinges at the bottom.
Sideboard return springs (not possible with split sides)
Platform width 2,420 mm
Pair of lashing eyes in the floor, each 5 t
Operational notes
The specified gross weight is technically possible; depending on the load, it may not be possible to reach the gross weight while observing permissible axle/support/kingpin loads (poor driving and trailing behavior may result from improper load distribution)
Country of registration/plates
Country of registration: Germany
With Dekra inspection and certification (according to §13 EC-FGV)
24/7 service hotline
Prepared for single-line number plate holder
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Coating
Frame hot-dip galvanized incl. passivation
"15 years warranty against rust-through"
Sideboards/platform RAL 9010 pure white
Note! Platform inside only primed if painted platform version.

Optional suitable aluminum loading ramps: €1,280 net

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.