Orman aracı

Pfanzelt MORITZ FR 75

MORITZ FR 75
(0010) _RH-10575/6-II Pfanzelt forestry crawler
(0020) Dimensions:
(0030) - Crawler vehicle with agricultural rubber tracks,
(0040) Track width: 300 mm
(0050) - Hydraulically adjustable overall width,
Itjdexbittepfx Aggor
(0060) from 1,200 mm up to 1,600 mm external width
(0070) Width adjustment via remote control
(0080) - Total length with attached winch and
(0090) logging blade: approx. 2,300 mm
(0100) - Ground clearance: approx. 320 mm
(0110) - Height to top edge of the frame: approx. 1,350 mm
(0120) - Approach angle approx. 50° at front and rear
(0130) - Weight: approx. 1 t
(0150) as standard
(0160) Engine:
(0170) - Deutz diesel engine TD2.9L4
4 cylinders, water-cooled, turbocharged
(0190) - Power output: 55 kW / 75 HP
(0200) - EU Emission Stage V
(0210) - Fuel tank capacity: approx. 45 l
(0220) - Hydraulic oil capacity: approx. 30 l
(0230) - Cleanfix reversible fan
(0240) - Combined water/hydraulic oil cooler
(0250) Drive hydraulics:
(0260) - Closed 2-circuit system
(0270) proportional (2 x 11 kW),
(0280) - All driving functions controllable by radio
(0290) - Pre-filter for hydraulic oil
(0310) - Infinitely variable speed:
(0320) 1st gear 0–3 km/h, 2nd gear approx. 0–6 km/h
(0330) - Maximum speed infinitely adjustable
(0350) - Drift adjustment to compensate
(0360) hillside force during cross-slope mowing
(0380) - Automatically hydraulically tensioned
(0390) dual idler wheels
(0400) Onboard hydraulics:
(0410) - Separate oil circuit, pump approx.
l/min at 200 bar
(0430) - Standard equipment: one proportional
(0440) control unit (for three-point hitch) with
(0450) float position
(0460) - Optionally up to 4
(0470) proportional double-acting valves
(0480) and 2 on/off double-acting
(0490) valves
(0500) Chassis:
(0510) - Torsion-resistant box-section frame
(0520) made from special steel
(0530) - Large lockable side storage compartment
(0550) and open top compartment
(0560) - Lashing points for securing the crawler
(0570) - Large engine cover for maintenance access
(0580) - Continuous underbody guard made of
(0590) solid steel
(0600) - Surrounding branch guard with
(0610) integrated hood protection
(0620) - Standard rear linkage with max.
(0630) lift capacity at coupling point: 11 kN
(0640) - Optional front linkage with max.
(0650) lift capacity at coupling point: 7 kN
(0660) Machine operation:
(0670) - Remote control for all functions
(0680) - Emergency stop
(0690) - Diesel engine throttle control
(0700) - Reversible fan
(0710) - Drive and steering
(0720) - 1st and 2nd gear
(0730) - Drift adjustment
(0740) - Winch control
(0750) - Logging blade up/down
(0760) - Hitch float position
(0770) - Optional lift relief
(0780) - Track width adjustment
(0790) - Travel direction reversal
(0800) - PTO on/off
(0810) - Auxiliary control valves
(0820) - Winch operation/external consumer
(0830) - Signal horn
(0840) - Optional lighting
(0850) ALL RADIO CONTROL FUNCTIONS ON A SINGLE CONTROL PLANE
(0860) PTO DRIVE Crawler with PTO gearbox
(0870) - Maintenance-free, oil-bath running
(0880) and oil-cooled multi-disc clutch
(0890) PTO speed at gearbox approx.
rpm at 2,100 rpm engine speed
(0910) Rotation direction (viewed at stub):
(0920) clockwise
(0930) PERFORMANCE HYDRAULICS High output hydraulic system
(0940) LIFT DEVICE Excavator/winch mount
(0950) CURTAIN_F

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.