Bulamaç teknolojisi

Joskin VOLUMETRA 18000 D

VOLUMETRA 18000 D
Joskin slurry tanker
With vacuum pump
Forced steering axle – incl.: drawbar eye,
Control unit incl.: 2 nitrogen spheres, hand pump with
oil reservoir and pressure gauge instead of
follow-up axle
Axle spacing of 1,820 mm instead of 1,550 mm
with Hydro-Tandem or Hydro-Tridem
(PROHIBITED with rigid axles) – REQUIRED
for tyres Ø 1,601 to 1,675 mm
Load-dependent air brakes for
vehicle with hydraulic axle suspension (air brakes required)
2 rear LED work lights (with control unit in cab)
Marker lights and side LED lights
Rear underrun protection
Pump type PNR 155 JUROP (15,200 l/min
at atmospheric pressure – 13,217 l/min
at 60% vacuum) – direct drive 1,000 rpm –
automatic lubrication,
60 l siphon separator, rubber hose Ø 100 mm,
JOSKIN pressure relief valve Ø 150 mm
and cooling via air injection
instead of MEC 8000
ECOPUMP: silencer with large-volume
oil separator and increased air supply –
noise reduction included
Single wide-angle PTO shaft
(Walterscheid)
Fill level indicator Ø 6" (150 mm
(Plexiglas sight tube) instead of
standard sight glass
Suction slide valve Ø 6" (150 mm) with
guide rail, Perrot type
Turbo filler Ø 8" (200 mm) high output (hydraulics: 50 l/min at
Prjdpfsxntdiox Aa Usd
180 bar) with pressure gauge Ø 60 mm
(suction slide valve required)
Preparation for FrontJUMBO without installation
Ø 200 mm or for side-mounted JUMBO
suction arm
Ball coupling Ø 50 mm for steering axle
tow bar
Electrohydraulic control with
low flow – everything except
hydraulic motor (distributor head, turbo, and
chopper) (input manifold required)
– per function
Flow diversion for turbo, agitator,
or tire pressure control system (high output with PVG) – (functions
with low output not available when using this function)
(NOTE: can only be ordered once)
TÜV approval for 40 km/h (without rear
underrun protection)
Tyres 750/60R30.5 FL 630 SUPER (BKT) 181
D (Ø 1,675 x 754 mm, 11,220 kg per tyre
at 40 km/h and 4 bar) instead of 400R22.5
Mini mudguard assembly (available only on VOLUMETRA
and EUROLINER)
SOLODISC pre-equipment for COBRA2,
TETRAX, QUADRA, EUROLINER, and VOLUMETRA
– incl. AUTOMATE kit 2+3 instead of rear slide valve and standard
distributor
AUTOMATE 2+4 instead of AUTOMATE 2+3
(required with SOLODISC with hydraulic levelling system)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.