Çalışma platformlu römorkMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Çalışma platformlu römork
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
sabit fiyat KDV hariç
€29.900
(€35.581 brüt)
Üretim yılı
2025
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€29.900
(€35.581 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 10.800 kg
- Toplam ağırlık:
- 14.400 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 6.270 mm
- Yükleme alanı genişliği:
- 2.470 mm
Teklif detayları
- Listeleme kimliği:
- A204-85-580
- Referans no.:
- 62471a
- Son güncelleme tarihi:
- 08.11.2025
Açıklama
* ETÜ-TA-R 14.4:
* EBS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
* 2 x 7-tonne Gigant axles
* Parabolic springs with compensator unit
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* Tyre pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* Landing gear at front
* External folding support legs at rear
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
* Plastic toolbox approx. 858 x 500 x 500 mm located front right on the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* 400 mm bolted flat sheet bulkhead
* Rear stanchions bolted
* Side walls with spring assist
* Perforated outer frame, folded approx. 45 degrees, with 2 t lashing capacity every 480 mm; option for 3 t folding lashing rings every 600 mm; 1 x 6.3 t lashing point in each front and rear corner; various holes for 1.2 t lashing options in the head and tail crossmembers
* One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 ltr/min up to max. 140 ltr/min)
* Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized
* Axles, springs, air tanks, front landing gear and flange drawbar eye painted black
* Side boards painted in RAL 2011 deep orange
* Side panels available in any RAL colour at surcharge
Djdoxvgrpepfx Agzscp
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* EBS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
* 2 x 7-tonne Gigant axles
* Parabolic springs with compensator unit
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* Tyre pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* Landing gear at front
* External folding support legs at rear
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
* Plastic toolbox approx. 858 x 500 x 500 mm located front right on the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* 400 mm bolted flat sheet bulkhead
* Rear stanchions bolted
* Side walls with spring assist
* Perforated outer frame, folded approx. 45 degrees, with 2 t lashing capacity every 480 mm; option for 3 t folding lashing rings every 600 mm; 1 x 6.3 t lashing point in each front and rear corner; various holes for 1.2 t lashing options in the head and tail crossmembers
* One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 ltr/min up to max. 140 ltr/min)
* Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized
* Axles, springs, air tanks, front landing gear and flange drawbar eye painted black
* Side boards painted in RAL 2011 deep orange
* Side panels available in any RAL colour at surcharge
Djdoxvgrpepfx Agzscp
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
İlanınız başarıyla silindi
Bir hata oluştu






























































