Yol süpürme aracı

SCANIA G360

Chassis Scania G360

Year of manufacture: 06/2018

Chassis Scania G360 Equipment: see attachment

Scarab Magnum Plus hydrostat
Waste container with a capacity of 8.2 m³, made entirely of stainless steel, grade 1.4301, including rear door
Water tank made of GRP, capacity 1,850 liters, filling via C-coupling
Scarab transfer case
Hydraulic pumps for powering the drive, turbine, and sweeping units mounted on the transfer case
Hydrostatic drive; direction of travel selectable via lever on small control panel (right), stepless driving speed via chassis accelerator pedal, cruise control
Tipping device with 2-stage cylinder
Automatic container support with position locking, pneumatically controlled
Manual safety support for rear door
Tipping procedure controlled via wired remote, mounted inside the cab
Water drainage device for container, double container inspection flaps right and left
Turbine mounted on top of the container; speed adjustable between 2,500 and 3,500 rpm
Hydraulic oil tank, 25-liter capacity, return filter, and sight glass
Oil cooler with hydraulically driven high-performance fan
Pulled suction duct (740 mm) on the right, guided by two 250 mm rubber wheels
Water nozzles for dust suppression, manual and stepless adjustment
Disk brush right (650 mm), towed, speed steplessly adjustable
Sweeping operation possible with retracted disk brush
Disk brush with overload protection to prevent damage on contact with obstacles
Water nozzle for dust suppression on the disk brush – 2x
Central brush with 400 mm, pulled, with shock absorbers for even wear
LED work lights for sweeping units
Beacon lights on cab and waste container
Automatic lifting of all sweeping units when engaging reverse gear
Stainless steel container sieve, 1.5 m², foldable
Hydraulically-driven low-pressure pump for spray water, 36 rpm at 3.5 bar
Spray nozzles for central brush mounted under the front bumper for spray water
CANbus 3b control/diagnostic system with compact control panel and status display
Small control panel on the right with basic and memory functions
Sweeping distance counter integrated into the control system
Certified PM10 standard according to EU-United
Sweeping units on both sides
Additional suction duct and side brush left with LED work light
Central brush swivels
Simultaneous use of left and right sweeping units
Central brush contact pressure adjustable (setting outside right; activation in cab)
Additional side brush behind front axle right; telescopic and swing-out, speed and contact pressure adjustable
Gedsx T N H Tepfx Aa Esil
2 spray water nozzles and an LED work light
Standard brush diameter 650 mm, may vary in tight spaces
Side brush pressure adjustable
Cab light bar, 58", on cab
Camera system with 3 cameras: 1st unit right, 2nd unit left, 3rd rear
Turbine flushing with high pressure
Rear high-pressure container connection for Magnum Plus; needed for rear surface suction
Rear suction hose with boom, 180 mm
3" water drain cock on rear door with sieve
GRP water tank 1,600 L for Magnum Plus (removes 1,850 L GRP water tank)

Combination tank system: nested tank setup
2,500 L water tank combined with 1,600 L GRP tank = 4,100 L total capacity

300 L diesel tank right
Hydraulic oil tank and system compartment left
Turbine flushing with high pressure
Rear container connection for Magnum Plus; needed for rear surface suction
3" water drain valve on tailgate with strainer
GRP water tank 1,600 L for Magnum Plus (removes 1,850 L GRP water tank)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.