Değiştirilebilir şasili römork

KÖGEL AW 18- 22,5"*SAF Achsen*Neuwertig

Location:
Hertle Spedition
Munninger Str 10
86732 Oettingen

VIN: WK0A0001800293377

Technical Data
Axle load: 9,000 kg
Permissible total weight: 18,000 kg
Technically possible total weight: approx. 18,000 kg
Unladen weight (standard configuration): approx. 2,550 kg
Unladen weight (custom vehicle configuration): approx. 2,580 kg
Theoretical payload: approx. 15,420 kg
(A) Wheelbase: approx. 5,040 mm
(D) Overall length: approx. 9,160 mm
(E) Overall width: approx. 2,550 mm
(M) Locking point distance: approx. 5,853 mm
(H5) Loading height unladen (travel position): approx. 1,255 mm
(H4) Loading height unladen (lowered): approx. 1,190 mm
(H5) Loading height laden (travel position): approx. 1,225 mm
(H6) Loading height laden (raised): minimum approx. 1,380 mm
Driving height set to 450 mm.
Suitable for transporting standard swap bodies according to EN 284 sizes C715 and C745.
Suitable for transporting standard containers according to ISO 668/1496, size 20'. Due to the installation of the underrun protection in line with EC standards, rear-flush loading is not possible!
(N2) Distance from front stop to center of locking point: approx. 650 and 800 mm
(O2) Distance from center of towing eye to front edge of swap body C745: approx. 1,940 mm
(Y) Drawbar height unladen, horizontal: approx. 905 mm
Drawbar swing range at 3° when driving: approx. +/- 130 mm, maximum drawbar swing range: approx. +/- 400 mm
(Q) Distance from center of axle to center of drawbar bearing: approx. 860 mm
Braking system in accordance with ECE-R13
Electrical system according to ECE-R48
Lightweight steel frame. Standard front stop, foldable and re-positional. Securing with 4 container locks (twist locks), mounted on container beams according to DIN EN 284. Turntable with ball race (diameter approx. 1,300 mm).
Front centering via guide rollers (Ø approx. 100 mm)
Rear centering via guide rollers (Ø approx. 100 mm)

Chassis
SAF INTRADISC axles with disc brakes, diameter 430 mm, offset 120 mm. Air suspension with 220 mm travel.
Vehicle Tires
Tyres 4x 385/65 R 22.5 160J (brand as selected by Kögel)
4 steel rims 22.5 x 11.75, offset 120 mm (ET 120).

Chassis Attachments
Splash protection system (spray suppression) in accordance with Regulation (EU) No. 109/2011 for 2-axle trailers, consisting of 1 pair of quarter-circle mudguards in front of the front axle, 1 pair of quarter-circle mudguards with mudflaps behind the front axle, and 1 pair of half-circle mudguards with mudflaps on the rear axle.
1 wheel chock with holder
Side underrun protection according to ECE-R73.
Drawbar with adjustable height, type-approved, with towing eye Ø approx. 40 mm in accordance with DIN 74054, [L]
Drawbar length: approx. 2,250 mm. Drawbar clearance at the towing vehicle must be checked by the operator!
High, fixed rear underrun protection made of steel in accordance with ECE-R58
Height of underrun protection profile min. 120 mm, designed for increased test forces.

Brake / Air Suspension System
Hsdpfx Agox U Rawj Uefb
EBS system 4S/3M (EBS-E-PREMIUM) with stability program, EBS connector ISO 7638 with connecting cables, parking brake as spring-loaded brake.
Air suspension system incl. 2 lift and lower valves, 1 valve each for front and rear axle. Arrangement between front and rear axles.
2 non-interchangeable coupling heads at the front ISO 1728
Air tanks for braking system and air supply made of steel (EN 286-2).

Bumper Protection
1 pair of rubber bumpers 200x150x120mm mounted at the frame end

Tires
Axle Position Dimension Ri

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.