Bulamaç teknolojisi

Wienhoff 20.300 TW PROFI LINE

20,300 TW PROFI LINE
(0010) Used Wienhoff 20,300 TW PROFI LINE
(0020) Slurry tanker with internal coating and
(0030) external paint finish.
(0040) 6.20 m cylinder,
(0050) 6 mm wall thickness, 2.00 m tank diameter, 3
(0060) welded baffle plates inside the tank and
(0070) manhole cover parallel to the rear
(0080) cover.
(0090) Tank with liquid displacement
(0100) for optimal hitch load distribution.
(0110) Color: RAL 6002 (Leaf Green).
(0120) Simple tank venting and aeration with
(0130) galvanized pipe routed through the tank.
(0140) E-hydraulics – secondary tank venting and
(0150) aeration at the rear for field application.
(0160) Level indicator with 150 mm sight glass
(0170) at the front of the tank.
(0180) Level float (diameter __ mm) at the front of the tank for CAN-bus.
(0200) 8" suction stub, reduced to 6", with hydraulic
(0210) slide valve and quick coupler.
(0220) Quick coupler with ball valve on the front left.
(0230) 6" mechanical slide valve with quick coupler
(0240) (directly on the tank for suction).
(0250) 14 t Gigant air suspension, tandem,
(0260) forced steering via cable, 150 mm BPW axles,
(0270) Track: 2225 mm.
(0280) Low center of gravity: Axles above the
(0290) springs, wheel arches over both axles.
(0300) Wienhoff "L&S" safety plus for
(0310) tandem:
(0320) - Automatic adjustment of air suspension pressure
(0330) according to load distribution
(0340) - Ride stability program (RSP)
(0350) - ABS system
(0360) - Hitch load sensor
(0370) Wheels: 800/60 R 32 Vredestein Fl. Trac
(0380) Hydro-pneumatically suspended lower drawbar
(0390) K80 with hydraulic support foot, K80 with large
(0400) flange (4 t).
(0410) Dual-circuit air brake system with ALB
(0420) 40 km/h rating with galvanized fenders:
(0430) Galvanized fenders with round bar edge,
(0440) warning signs + marker lights
(0450) Rear underrun protection with truck lighting
(0460) 40 km/h TÜV certificate
(0470) Additional upper tank lighting, as LED
(0480) version.
(0490) 2 LED work lights,
(0500) Positions:
(0510) 2x left/right
(0520) 2x rear
(0530) 1x at the suction arm
(0540) Active marker lights instead of reflectors (cat's eyes) on the vehicle sides, LED.
(0560) Large stone trap with door
(0570) and preparation for the Vogelsang RotaCut M 10 rotary lobe pump VX 186/390Q
(0580) – L/min
(0610) Injection system with hydrostat
(0620) hydraulically controlled rotary lobe pump via
RPM.
(0640) PTO,
(0650) - Gearbox
(0660) - hydrostatic pump
(0670) - controlled oil cooler & oil tank
(0680) Drain valves on the pump suction and
(0690) pressure side.
(0700) Wienhoff fill turbine 8 inch Type 30
(0710) for docking arm.
(0720) With valve for the E-hydraulics.
(0730) Pressure monitoring unit
(0740) Pressure gauge on pressure side with
(0750) membrane gauge
(0760) Suction side monitoring unit
(0770) Vacuum gauge on the suction side
Cjdpfx Ahsyhr Nxs Dspu
(0780) with membrane gauge.
(0790) With 8" inspection flap.
(0800) 2" overpressure valve at the vacuum gauge.
(0820) PRESSURE FILTER BEFORE THE CONTROL BLOCK!
(0830) WieTaCon 14-1 / PTW basic function.
(0840) Aux version 6 / suction / docking arm
(0850) all / boom / distribution / headland / 2-axle joystick.
(0870) Auxiliary control box for suction slide valves
(0880) lower left and right.
(0890) Auxiliary control box for lift/lower implement
(0900) rear left.
(0910) Installation of delivered camera
(0920) Preparation for Wienhoff N-Sensor
(0930) Hydraulic pipes instead of hoses routed
(0940) to the rear, coupling brackets
(0950) rear side.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.