Süpürge / yol servisi

Bucher - GMeiner - Giletta TGM 18250 Bucher

Operating hours:1600, first registration:23.06.2016, self-propelled_____Standard basic equipment:Fan unit - Fan drive hydraulically via the gearbox-independent power take-off located on the chassis (semi-hydrostatic drive)- Hydraulic fan drive - Hydraulic oil tank 50 l - Engine compartment fitted with noise-insulating material- Fan exhaust air routed upwards through the front of the container- Hydraulic pump, single sweepings container- Sweepings container (with tailgate and sieve) and water tank made of 1.4003 chrome steel engine compartment cladding, mild steel- Sweepings container gross volume 6.5 m³- Sweepings container floor made of chrome-alloyed stainless steel, 1.4301- Sweepings container tipping angle approx. 55 degrees- Dirt chute made of chrome steel, 1.4003- Observation flap right and left- 4" dirty water outlet, A-coupling- Air guide screen, can be folded down manually- 2 rotating beacons at the rear on KGB- Air shut-off on the suction hose, pneumatically operated- Multi-stage safety support, pneumatically operated- Marker lights at the rear of the container, side marker lights- Integrated water tank- Preparation for rear suction hose extension or mounted on the roof- Side marker lights- Sweepings pick-up- Sweepings pick-up, Wear-resistant coating- Coarse pick-up by tilting the suction mouth- Suction hose diameter 250 mm- Pushed disc brushes- Hydraulically driven disc brushes, steel- Disc brushes, steel, 500 mm diameter, trailed- Infinitely variable speed control for disc brushes - Two robust swivel castor wheels- Automatic lifting of the sweeping units when reversing- Working lights for sweeping unit roller brushes- Roller brush suspension, trailed- Brush length 1.300 mm, brush diameter 406 mm with plastic trimming (depending on chassis)- Hydraulically driven roller brush- Throw limiting skirt for roller brush unit- Water system- Water tank volume approx. 1,554 l- Water tank made of chrome steel, 1.4003 with coating- Water level indicator in the cab- Water filling device, Storz C (2"), right- Manual water filling device, right and left- Water pump, hydraulically driven- Automatic water stop when lifting the sweeping units- Splash water connection, 3/4", rear right- Water blow-out system- Electric water valves in the cab- 2-nozzle strip low pressure front instrument panel and control panel- Bucher instrument panel, incl. 7" color display- Ergonomic control unit, mounted on the driver's door, equipped with the main functions - Display includes the following functions: Water level indicator, operating hours and rear axle load - Warning and indicator lamps for rear axle load - Monitoring and control unit for regulating the brush contact pressure (brush relief), infinitely variable speed regulation of the disc brushes - Electric valves for water system, operation in the cab - Operation of the dirt container functions using a cable remote control from the cab, but also possible from outside - Operation of the air guide sieve, operation at the rear right of the vehicle - Overload indicator for rear axle load, warning lamp in the display (optional)
Fb9Dew9

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.