At taşıma römorku

MENKE-JANZEN Menke 4,10 m 3,5 to Vollalu " Neu" Viehanhänger

WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles

Expertise and Service from a Single Source

WS Trucks GmbH is your dependable partner for purchasing and selling commercial vehicles. With over 25 years of experience, we offer an extensive range of used and new trucks, livestock transporters, refrigerated vehicles, trailers, and semitrailers.

---
Weights & Dimensions
* Permissible total weight: 3,500 kg
* Drawbar load: 100 kg
Body dimensions (internal):
* Length: approx. 4,500 mm
* Width: approx. 1,950 mm
* Height: approx. 2,000 mm

---
Chassis & Suspension
* Welded chassis frame made from aluminium profiles
* Rubber-sprung axle assembly
* Axle load: 2,500 kg per axle
* Axle spacing: 800 mm
* Wheels: 195 R14 C 8PR, 5-stud
* 4-wheel overrun brake with automatic reverse function
* Lighting system in accordance with StVZO

---
Drawbar & Support
* V-drawbar with overrun device for ball coupling
* Overrun device for max. drawbar load 150 kg
* Automatically folding support wheel, static max. 250 kg
* Spare wheel holder mounted on the front wall
* 2 wheel chocks with holder

---
Mudguards & Lighting Bar
* 2 aluminium mudguards (tandem design), bent from 3 mm thick aluminium plate
* Aluminium lighting bar, mounted laterally on corner posts
* Impact-protected mounting of rear lights
* License plate with lighting mounted above on roof frame

---
Body & Walls
* Body construction made from special aluminium extruded profiles
* Side walls made from aluminium hollow chamber profiles
* Smooth interior and exterior wall finish
* Front wall made from aluminium profiles

---
Floor & Drainage
* Floor made from 30 mm thick aluminium elements
* Surface machined lengthwise and crosswise
* Sanitation edge at all ramp and door openings
* 1 water drain with sealing cap at the rear floor area

---
Ventilation & Aeration
* Ventilation openings approx. 300 mm high above both side boards
* With 2 manually operable aluminium sliders
* Sliders fixed by snap-lock

---
Doors, Roof & Ramp
* Front wall door without ventilation opening
* Clear door width approx. 800 mm
* Clear door height approx. 1,000 mm
* Roof made from solid, flat composite plastic panel (honeycomb panel)
* Rear wall as loading ramp, approx. 1,600 mm wide
* Spring-assisted
* Ramp running surface made from aluminium checker plate
* Tread surfaces from bent steel strips
* 2-piece aluminium ramp railing, approx. 1,200 mm high
* Ramp can be opened as a door
* Ramp running surface Marotan-coated

---
Interior Fittings & Partition System
Rbjdolb Scaspfx Ad Tjw
* Swingable aluminium partition grille, approx. 1,600 mm high
* Grille made completely of aluminium
* Each grille with 2 integrated hand recesses
* Grille can be fixed to the side wall when open
* Grille can be fitted in front of the front wall
* Grille can be installed at any side post as well as centrally
* Behind the ramp opening, 2 rows of aluminium barrier doors, divided centrally

---
Lighting & Electrical
* Interior lighting:
* 1 LED interior light with protective grille
* Switch for interior light mounted in light carrier
* Exterior lighting compliant with ECE Regulation 48
* Deviations from ECE Regulation 48 only by request and written agreement
* 2 lane marker lights on the light carrier
* 1 LED work light mounted on the right side above loading ramp
* 13-pin connector

---
Accessories & Finish
* 1 plug-in rear apron as underrun protection, reserved on front wall
* Body colour: RAL 9060 silver
* Floor frame colour: RAL 7016 anthracite grey
* Label

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.