Kullanılmış Humbaur Ht Fragmanlar satın al (553)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Humbaur
Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici römork
HumbaurHTD30K-RM-BM / Luftfederung
Ara
Durumu: yeni, boş ağırlık: 6.700 kg, toplam ağırlık: 30.000 kg, yükleme alanı uzunluğu: 8.550 mm, yükleme alanı genişliği: 2.540 mm, Üretim yılı: 2026, Donanım: tır çekici bağlantısı, HTD30K- RM-BM / Air Suspension
Technical Data:
Internal dimensions: approx. 8,550 mm x 2,540 mm
Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm
Permissible total weight: 24,000 kg
Payload: approx. 17,300 kg
Tires: 235/75 R17.5 twin tires
Loading height: approx. 900 mm
Drawbar length: approx. 1,800 mm
Coupling height: approx. 800–980 mm
Plank length: approx. 3,150 mm
Plank width: approx. 750 mm
Permissible total weight (special permit): 30,000 kg
Payload (special permit): approx. 23,300 kg
Low bed length: approx. 6,500 mm
Overall length (B-dimension): 10,800 mm
Technical gross weight: approx. 33,000 kg
8 pairs of lashing rings, 3,000 kg per lashing point, located in the outer frame
3 pairs of lashing rings, 10,000 kg per lashing point, recessed in the low bed
2 pairs of lashing rings, 10,000 kg per lashing point, recessed in the rear bed
4 pairs of lashing rings, 2,000 kg per lashing point, above the wheel cutouts 2nd and 3rd axle
7 pairs of lashing rings, 3,000 kg per lashing point, stake pockets (90x50 mm) with lashing option
Standard Equipment:
Axles
Low loader axles from renowned manufacturers
Suspension
Air suspension unit including lifting and lowering function, acting on the rear axle aggregate
Braking System
Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake
Including 2 external test connections
for brake/modulator and bellows pressure
Electrics
LED lighting with indicator function
for side marker lights, multivoltage (12–24V)
Turntable
Heavy-duty welded construction with low-maintenance ball bearing turntable
Drawing Device
Drawbar with 8° angled towing eye Ø40 mm, height adjustable, low-maintenance silent bushings
Frame
Robust welded structure made from high-strength fine-grain steel
Continuous cross-members for maximum stability
Dedpfxsq Ulaqj Afmour
Front wheel recess (top length approx. 2,170 mm); rear wheel recess (top length 1,280 mm), depth 330 mm
Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm)
Maximum safety during loading and unloading
Flooring
50 mm softwood planking
Ramps
One-piece hot-dip galvanized loading ramps
(3,100 mm x 750 mm) with 50 mm softwood planking, laterally shiftable
Direct-acting upright spring assist for easy operation
Optimum securing by tension lock and counter-stop
Finishing
Chassis and turntable frame hot-dip galvanized by immersion
Support
2 folding supports at the rear left and right of the vehicle
Features
Foldable side underrun protection
Other
Retro-reflective markings according to ECE Directive R48: white on the side, red at the rear
Front wheel recess cover with 2 pairs of stake pockets, without planking (cover retractable under the longitudinal beams)
Hardwood flooring for RM covers front and rear wheel recess covers
Storage box at the top front of the platform area, with folding lid, size approx. L 700 x D 810 x H 140 mm
LED warning package, HTD offset Aspöck warning panels (4), electrics and beacon
3 m accessory kit without loading ramp bevel for HTD30K wheel recess low loaders with 6,500 mm low bed, folding extension with spruce planks for the flat area of the low bed
Basic hydraulics for trucks with rear connection, operating pressure max. 200 bar, up to 150 l/min with 2-circuit hydraulic connection and return with quick coupling SVK BG3
Hydraulic ramp shift side-to-side by approx. 300 mm each side
Hydraulic ramp lifter for single-piece ramp
Hydraulic support legs left and right, suitable for stepped l
Küçük ilan
Nürnberg
2.232 km
Düşük yükleyici
HumbaurHTD 40 v21
Ara
Durumu: yeni, boş ağırlık: 7.500 kg, azami yük ağırlığı: 32.500 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, bir sonraki muayene (TÜV): 03/2023, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 3.000 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75r17,5, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, TOP SPECIFICATION => INCLUDING THE FOLLOWING EQUIPMENT:
- Chassis frame hot-dip galvanized in immersion bath
- Front storage compartment at the top of the platform, with hinged lid
- Rear storage compartment at the top of the platform, with hinged lid
- Recess for excavator arm support in the rear area of the low-bed
- 3 m equipment package without slope
- Warning package for special permit
- Steel sheet toolbox
- Stake pocket package in the outer frame
- Basic hydraulics for truck with rear connection
- Hydraulic ramp lifter for one-piece ramps
- Hydraulic lateral ramp shift
- Hydraulic support legs left and right
- 1 pair of lashing rings (6 t) in the outer frame, bolted
- WABCO SmartBoard configured
- SSV complete, front left HTD409525K
Duedpfx Afsglblljmor
- COC paperwork
OPTIONAL
- Rubber flooring on the ramp: €1,890 net
- Rubber flooring on the slope: €1,250 net
- Swivel drawbar 40 / 50 DIN
Küçük ilan
Nürnberg
2.232 km
İnşaat makineleri için alçak yükleyici römorklar
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Ara
Durumu: yeni, boş ağırlık: 10.650 kg, azami yük ağırlığı: 39.350 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.830 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 5-AXLE SWING BOGIE LOWBED TRAILER, HOT-DIP GALVANIZED
=> FULL AIR SUSPENSION
=> HOT-DIP GALVANIZED
IN TOP CONFIGURATION!!!!
* AS LIFT AXLE
* AS SELF-STEERING FOLLOWING AXLE
• SAF – LOWBED AXLES
• AIR SUSPENSION
• ONE-PIECE LONG LOADING RAMPS
• HYDRAULIC RAMP LIFTER
• HYDRAULIC REAR SUPPORTS
• HYDRAULIC SIDE SHIFTING
• HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE
• EXCAVATOR ARM TROUGH
• CHASSIS AND BOGIE FRAME HOT-DIP GALVANIZED
• OUTER FRAME ADDITIONALLY PAINTED IN RED
• LOADING RAMPS HOT-DIP GALVANIZED
• 10 t RECESSED LASHING POINTS IN LOADING PLATFORM
• 3 t LASHING POINTS IN OUTER FRAME (High Deck)
• 6 t LASHING POINTS IN OUTER FRAME (Lowbed)
• 4 pairs of 3 t lashing points in outer frame (Lowbed)
Dedehmm Rcspfx Afmsur
• LASHING POINTS IN EXCAVATOR ARM TROUGH
• 3-METER WIDENING PACKAGE
• FOLD-OUT EXTENSIONS
• WOODEN PLANKS IN STEEL BOX UNDER LOADING PLATFORM
• SECOND STEEL STORAGE BOX UNDER LOADING PLATFORM
• WARNING SIGNS
• REAR BEACON LIGHT
• REAR STEPS
• 2 STORAGE BOXES IN HIGH DECK
• DIGITAL AXLE LOAD DISPLAY
• WABCO SMARTBOARD
• AIR SUSPENSION
• LIFT-AND-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING AND UNLOADING)
• STAKE POCKETS IN OUTER FRAME
• TWO STAKE POCKETS INCLUDING DROP-IN STAKES AT FRONT END
• EBS - ELECTRONIC BRAKING SYSTEM
B-DIMENSION = approx. 11,790 MM
=> Freight cost for delivery: €2.90 plus VAT per km
=> Prices ex D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and changes!*
*Price valid ex D-86368 Gersthofen*
*Sale only to business customers!*
*Images may deviate and are for general guidance only – may include/show accessories for extra charge*
Küçük ilan
Nürnberg
2.232 km
Düşük yükleyici
Humbaur3-Achs-Tieflader HTD 30 LIGHT PARABELFEDERUNG
Ara
Durumu: yeni, boş ağırlık: 6.000 kg, azami yük ağırlığı: 24.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.540 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 3-AXLE HUMBAUR LOW-LOADER TRAILER
INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME
=> HOT-DIP GALVANIZED CHASSIS FRAME
=> HOT-DIP GALVANIZED TURNTABLE FRAME
=> HOT-DIP GALVANIZED RAMPS
=> 10 UNITS 10-TON LASHING POINTS
=> 10 UNITS 3-TON LASHING POINTS, OUTER FRAME
=> 8 UNITS 2-TON LASHING POINTS, ABOVE WHEELS
=> SPRING-LIFTING MECHANISM FOR RAMPS
=> 40 MM DIAMETER TOWING EYE
=> RAMPS APPROX. 2,700 MM LONG
=> RAMPS APPROX. 750 MM WIDE
=> TWIN TYRES 235/75 R17.5
=> LOADING HEIGHT WHEN LOADED ONLY APPROX. 860 MM
=> COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM
=> FRONT CORNERS BEVELLED
=> TWO FOLDING SUPPORT LEGS AT REAR
=> AND MUCH MORE
=> Delivery freight: EUR 2.90 plus VAT per km
Dedpfxod U A Tgs Afmjur
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and modifications!*
*Price valid ex works D-86368 Gersthofen*
*Sale to business customers only!*
*Images may differ and are for general reference only => may contain/show optional accessories at additional cost*
Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
Humbaur3-ACHS-TIEFLADER HTD 30-K V5
Ara
Durumu: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 23.350 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.540 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 3-axle low loader
=> Full air suspension (front and rear)
=> Hot-dip galvanized
Gross vehicle weight: 30,000 kg
Payload: approx. 23,350 kg
Chassis frame hot-dip galvanized by immersion bath
Air suspension
SAF axle with drum brake
EBS electronic braking system
Tyres: 235/75R17.5 – 12 units
Low-bed length: approx. 6,500 mm
3 pairs of 10 t lashing rings recessed in the low-bed
2 pairs of 10 t lashing rings recessed in the high-bed
Dujdpfx Afehmm N Usmsr
4 pairs of 3 t lashing points on the outer frame
3 pairs of 6 t lashing eyes on the outer frame
6 pairs of stanchion pockets 90 x 50 mm in the outer frame
Storage box front top on the platform, with folding lid
3-metre widening kit without chamfer, with folding outriggers
Spring ramp lifter
4 warning panels
Rotating beacon
Storage compartment under the loading area
1-piece ramps, approx. 3,150 x 750 mm
Softwood decking for loading area and ramps
Extras available if required:
Hydraulic ramp lifter €2,690.00 + VAT
=> Delivery freight costs: €2.90 plus VAT per km
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and modifications!*
*Price valid ex works D-86368 Gersthofen*
*Sale to business customers only!*
*Images may differ and are for general guidance only – may show/accessorize items at extra cost*
Küçük ilan
Eilenburg
2.237 km
Üç yöne devirmeli römork
HUMBAURHTK-Garant Dreiseitenkipper 3000kg
Ara
Durumu: kullanılmış, azami yük ağırlığı: 2.130 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 3.626 mm, toplam genişlik: 2.022 mm, toplam yükseklik: 1.240 mm, Errors and prior sale excepted!
Internal number: 1451. GW220985927
---- Please refer to the images for equipment and condition.
Djdpspxmg Nsfx Afmjur
---- The vehicle is sold as-is/unprepared!
Nationwide delivery available at additional cost.
Errors and prior sale excepted.
We are happy to consider your vehicle as part exchange.
Financing / leasing also possible with no down payment!
Do you have any questions? We are happy to advise you!
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 2700.31 Alu, 3140 x 1750 x 350 mm, 2,7 to.
Ara
Durumu: yeni, boş ağırlık: 850 kg, azami yük ağırlığı: 1.840 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.31 Gross vehicle weight: 2,700 kg Payload: 1,850 kg Unladen weight: 850 kg Body dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 745 mm Load platform hydraulically tiltable via hand pump Tipping angle rear: 42°, side: 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of single-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg gross vehicle weight, electric pump with manual override - 13-pin plug and reversing lights - Drop sides made from powder-coated, galvanized steel sheet – fully removable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the deck, 800 kg traction each, Dekra certified - Support wheel - Channel for ramps pre-fitted for easy retrofit of aluminum ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: Auto-reverse, rubber suspension axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sheet, braked, with warranty, V-drawbar hot-dip galvanized, chassis and tipping platform hot-dip galvanized, tipping platform made of a single piece of steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross vehicle weight with electric pump/manual override, 13-pin plug and reversing lights, powder-coated removable side panels, rear pendulum tailgate, 6 lashing rings (800 kg each, Dekra certified), ramp channel prepared for easy retrofit of aluminum ramps.
Dujdpforvgtvjx Afmer
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3000.31 Alu, 3140 x 1750 x 350 mm, 3,0 to.
Ara
Durumu: yeni, boş ağırlık: 870 kg, azami yük ağırlığı: 2.130 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load area hydraulically tip-able with hand pump and electric pump Tipping Angle: rear 42°, side 50°
- V-drawbar, hot-dip galvanized
- Chassis and tipping bridge hot-dip galvanized
- Tipping bridge made from a single steel piece
- 4-stage hard-chromed tipping cylinder
- Hand pump (electric pump with hand pump from 3,000 kg gross weight)
- 13-pin connector and reversing lights
- Removable aluminium side panels, 350 mm high
- Rear flap pendulum-mounted
- 6 lashing rings mounted to the deck, each with 800 kg tensile strength, Dekra certified
- Support wheel
- Plank compartment pre-fitted for easy retrofit of aluminium planks
Price includes vehicle registration certificate (Part II and COC documents)
We have a large stock of trailers from the following manufacturers:
Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun
On request, we can provide a free short-term license plate for transport. We repair trailers of all manufacturers. Further accessories upon request.
Technical specifications, prices, and details subject to change and errors excepted. We do not accept liability for errors or misprints.
Dedpfx Afjrq Ew Tsmsur
Features: auto-reverse brakes, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, hot-dip galvanized chassis & tipper bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single steel piece, 4-stage hard-chromed tipping cylinder, hand pump (electric pump with hand pump from 3,000 kg gross weight), 13-pin plug and reversing lights, 350 mm high fully removable aluminium side panels, pendulum rear gate, 6 lashing rings mounted to deck (800 kg tensile strength per ring, Dekra certified), plank box pre-installed for easy retrofit of aluminium ramps.
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3500.41 Alu mit BW-Aufsatz, 4100 x 2100 x 350 mm, 3,5 to.
Ara
Durumu: yeni, boş ağırlık: 972 kg, azami yük ağırlığı: 2.315 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.100 mm, yükleme alanı genişliği: 2.100 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 3,4 m³, renk: diğer, inşaat yüksekliği: 1.460 mm, çalışma genişliği: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Gross Weight: 3,500 kg Payload: 2,315 kg Unladen Weight: 1,185 kg Body Dimensions: 4,100 x 2,100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Loading platform hydraulically tiltable with manual and electric pump Tipping Angle: Rear 45°, Side 45° 350 mm aluminium side wall extension included - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - One-piece steel tipping bridge - 4-stage hard-chromed tipping cylinder - Manual pump; electric pump also supplied from 3,000 kg perm. gross weight - 13-pin plug and reverse lights - 350 mm high aluminium side walls, fully removable - Rear flap can swing - 8 lashing rings installed on the floor, tensile force 800 kg each, Dekra certified - Support wheel - Plank compartment prepared for easy retrofitting with aluminium planks Price includes vehicle registration certificate (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Free export number plate available on request. We repair trailers of all makes. Further accessories available upon request. Subject to technical modifications, price changes, and errors. No liability for mistakes or typographical errors. Features: auto-reverse, rubber suspension axle, independent wheel suspension, tiltable loading area, support wheel, marker lights, hot-dip galvanized chassis and tipping bridge, braked, warranty included, V-drawbar hot-dip galvanized, steel tipping bridge one piece, 4-stage hard-chromed tipping cylinder, manual pump, electric pump with manual pump (from 3,000 kg perm. gross weight), 13-pin plug and reverse lights, 350 mm high fully removable aluminium side walls, swinging rear flap, 8 lashing rings on the floor (800 kg tensile strength each, Dekra certified), plank compartment pre-installed for easy retrofitting with aluminium planks.
Djdsflw Sbspfx Afmeur
Küçük ilan
Neu-Ulm
2.271 km
Araba römorku
HumbaurHA 203015 mit Plane + Spriegel 200 cm Lichte Höhe, 2,0 to. ZG. 3030 x 1500 x 350 mm
Ara
Durumu: yeni, boş ağırlık: 367 kg, azami yük ağırlığı: 1.600 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.030 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 2.000 mm, yükleme alanı hacmi: 9 m³, renk: gri, inşaat yüksekliği: 2.550 mm, çalışma genişliği: 2.040 mm, Manufacturer: Humbaur Model: Low Loader Aluminum HA 203015 Permissible Total Weight: 2000 kg Payload: 1600 kg Unladen Weight: 400 kg Box Dimensions: 3030 x 1500 x 350 mm Equipped with light grey tarpaulin and 200 cm high frame, internal height including Eco nose (front chamfered) Tires: 13 inch Loading Height: 525 mm With foldable front wall - V-drawbar, hot-dip galvanized by immersion - 13-pin connector - 15 mm thick floor plate - Side walls made of anodized aluminum - Tailgate(s) with recessed locks - 6 lashing rings integrated in the side walls, traction force 400 kg per lashing ring, Dekra certified - Humbaur multifunction rear lights integrated into underrun protection Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Upon request, we provide a free temporary transit license plate. We repair trailers of all manufacturers. Further accessories available on request. Technical and price modifications as well as errors excepted. No liability accepted for errors or printing mistakes. Reverse automatic, rubber spring axle, independent wheel suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar hot-dip galvanized by immersion, braked, including warranty, 13-pin connector, 15 mm thick floor plate, sideboards made of double-walled anodized aluminum profiles, tailgate(s) with recessed locks, 6 lashing rings integrated in the side boards, traction force 400 kg per lashing ring, Dekra certified.
Duodpfx Afed T Stujmsr
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3500.41 Alu Tridem, 4100 x 2100 x 350 mm, 3,5 to.
Ara
Durumu: yeni, boş ağırlık: 1.140 kg, azami yük ağırlığı: 2.360 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 4.100 mm, yükleme alanı genişliği: 2.100 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 3,4 m³, renk: diğer, inşaat yüksekliği: 1.240 mm, çalışma genişliği: 2.280 mm, Manufacturer: Humbaur
Model: 3-way tipper HTK Alu 3500.41
Permissible total weight: 3,500 kg, Tridem
Payload: 2,360 kg
Unladen weight: 1,140 kg
Internal dimensions: 4,100 x 2,100 x 350 mm
Tyres: 13 inch
Loading height: 750 mm
Platform hydraulically tiltable via manual pump and electric pump
Tipping angle rear 45°, lateral 45°
- V-drawbar, hot-dip galvanised
- Chassis and tipping platform hot-dip galvanised by immersion
- Tipping platform made of single-piece steel
- 4-stage hard-chromed tipping cylinder
- Manual pump, from 3,000 kg permissible total weight with electric pump and manual pump
- 13-pin connector and reversing lights
- Aluminium drop sides, 350 mm high, fully removable
- Rear flap with swing function
- 8 lashing rings mounted on the platform floor, pull force 800 kg per ring, DEKRA tested
- Jockey wheel
- Shaft prepared for easy retrofit of aluminium ramps
Price includes registration certificate (Registration document Part II and COC papers)
We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun.
On request, we can provide free temporary transfer plates.
We repair trailers from all manufacturers. Further accessories available on request.
Technical changes, price adjustments, and errors excepted. No liability for errors or misprints.
Dedpfxjd T Svto Afmjur
Reversing automatic, rubber suspension axle, independent wheel suspension, tilting platform, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanised by immersion, braked, incl. warranty, V-drawbar hot-dip galvanised, single-piece steel tipping platform, 4-stage hard-chromed tipping cylinder, manual pump, from 3,000 kg permissible total weight with electric pump and manual pump, 13-pin connector and reversing lights, aluminium side walls 350 mm high, fully removable, rear flap with swing function, 8 lashing rings mounted on the platform floor, pull force 800 kg per ring, DEKRA tested, shaft prepared for easy retrofit of aluminium ramps.
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3500.41 Alu, 4100 x 2100 x 350 mm, 3,5 to.
Ara
Durumu: yeni, boş ağırlık: 972 kg, azami yük ağırlığı: 2.315 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.100 mm, yükleme alanı genişliği: 2.100 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 3,4 m³, renk: diğer, inşaat yüksekliği: 1.240 mm, çalışma genişliği: 2.280 mm, Manufacturer: Humbaur
Model: 3-Way Tipper HTK Alu 3500.41
Gross Vehicle Weight: 3,500 kg
Payload: 2,315 kg
Empty Weight: 1,185 kg
Bed Dimensions: 4,100 x 2,100 x 350 mm
Tyres: 13-inch
Loading Height: 760 mm
Loading platform hydraulically tiltable (manual pump and electric pump)
Tip angle rear 45°, side 45°
- V-drawbar, hot-dip galvanized immersion
- Chassis and tipping bridge hot-dip galvanized immersion
- Tipping bridge made from a single piece of steel
- 4-stage hard-chromed tipping cylinder
- Manual pump, from 3,000 kg permissible gross weight combined electric and manual pump
- 13-pin plug and reverse lights
Duodpfsri Tawsx Afmsr
- Aluminum drop sides, 350 mm high, fully removable
- Rear tailgate with pendulum function
- 8 lashing rings mounted on the platform floor, lashing capacity 800 kg each, Dekra certified
- Jockey wheel
- Channel prepared for aluminum ramps for easy retrofitting
Price includes registration documents (Vehicle Registration Part II and COC papers)
We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun.
On request, we can provide a free temporary license plate.
We repair trailers from all manufacturers. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors.
Automatic reversing system, rubber suspension axle, independent suspension, tilting load platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized immersion, braked, including warranty, V-drawbar hot-dip galvanized immersion, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, manual pump, from 3,000 kg permissible gross weight combined electric and manual pump, 13-pin plug and reverse lights, drop sides made from 350 mm high aluminum, fully removable, rear tailgate with pendulum function, 8 lashing rings mounted on the platform floor, lashing capacity 800 kg each, Dekra certified, ramp channel prepared for easy retrofitting of aluminum ramps.
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3500.31 Alu, mit Laubgitteraufsatz
Ara
Durumu: yeni, boş ağırlık: 988 kg, azami yük ağırlığı: 2.512 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur
Model: 3-Way Tipper HTK Alu 3500.31
Permissible Total Weight: 3,500 kg
Payload: 2,512 kg
Unladen Weight: 988 kg
Body Dimensions: 3,140 x 1,750 x 350 mm
Tyres: 13-inch
Loading Height: 740 mm
Loading platform hydraulically tiltable with manual and electric pump
Tipping Angle: rear 42°, lateral 50°
With leaf mesh/stainless steel mesh extension, 600 mm high, tiltable on all four sides
- V-drawbar, hot-dip galvanized
- Chassis and tipping platform hot-dip galvanized
- Tipping platform made from single-piece steel
- 4-stage hard-chrome tipping cylinder
- Manual pump; from 3,000 kg permissible total weight with electric pump and manual pump
- 13-pin connector and reverse lights
- Aluminium side walls, 350 mm high, fully removable
- Rear gate tiltable
- 6 lashing rings mounted to the bridge floor, tensile force 800 kg per ring, certified by Dekra
- Support wheel
- Plank compartment prepared for retrofitting aluminium ramps
Price incl. vehicle registration document (Registration Certificate Part II and COC papers)
We have a wide selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun.
On request, we offer free transit plates. We repair trailers of all makes. Further accessories available on request.
Technical changes, price variations, and errors excepted. No liability for mistakes or typographical errors.
Features:
• Automatic reverse function
• Rubber suspension axle
• Independent wheel suspension
• Tiltable loading platform
• Support wheel
• Position lights
• Chassis and tipping platform hot-dip galvanized
• Braked
• Incl. warranty
• V-drawbar, hot-dip galvanized
• Single-piece steel tipping platform
• 4-stage hard-chrome tipping cylinder
• Manual pump, with electric pump and manual pump from 3,000 kg permissible total weight
Dusdpfx Ajrazlkefmsr
• 13-pin connector and reverse lights
• Aluminium side walls, 350 mm high, fully removable
• Rear gate tiltable
• 6 lashing rings mounted to the bridge floor, tensile force 800 kg per ring, Dekra-certified
• Plank compartment prepared for easy retrofitting of aluminium ramps
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 2000.27 Alu, 2670 x 1500 x 350 mm, 2,0 to.
Ara
Durumu: yeni, boş ağırlık: 643 kg, azami yük ağırlığı: 1.335 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.670 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 1,6 m³, renk: diğer, inşaat yüksekliği: 1.220 mm, çalışma genişliği: 1.680 mm, Manufacturer: Humbaur
Dodpfxjgi Sr Sj Afmour
Model: 3-Way Tipper HTK Alu 2000.27
Gross Vehicle Weight: 2,000 kg
Payload: 1,335 kg
Unladen Weight: 665 kg
Body Dimensions: 2,670 x 1,500 x 350 mm
Tyres: 13 inch
Loading Height: 750 mm
Load Area: hydraulically tip-able via manual pump
Tipping Angle: rear 45 degrees, sideways 50 degrees
- V-drawbar hot-dip galvanized
- Chassis and tipping platform hot-dip galvanized
- Tipping platform made of one-piece steel
- 4-stage hard-chrome-plated tipping cylinder
- Hand pump; from 3,000 kg gross weight, an electric pump with manual override
- 13-pin connector and reversing lights
- Drop sides made from powder-coated, galvanized steel plate, fully removable
- Rear tailgate is swinging/pendulum mounted
- 6 lashing rings mounted on the platform floor, each with a load capacity of 800 kg, Dekra certified
- Jockey wheel
- Channel prepared for retrofitting aluminium ramps
Price includes vehicle registration certificate (Part II and COC documents).
We stock a large number of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide you with a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request.
Technical changes, price alterations, and errors excepted. No liability for errors or typographical mistakes.
Features: automatic reversing system, rubber suspension axle, independent wheel suspension, tiltable load area, jockey wheel, outline marker lights, galvanized steel plate, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping platform hot-dip galvanized, one-piece steel tipping platform, 4-stage hard-chrome-plated tipping cylinder, hand pump (electric pump with manual override from 3,000 kg GVW), 13-pin plug and reversing lights, powder-coated drop sides, fully removable, swinging rear tailgate, 6 lashing rings on the platform floor (800 kg capacity each, Dekra certified), channel for easy retrofitting of aluminium ramps.
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3500.31 Alu black edition , 3140 x 1750 x 350 mm, 3,5 to.
Ara
Durumu: yeni, boş ağırlık: 988 kg, azami yük ağırlığı: 2.512 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: siyah, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur
Model: 3-Way Tipper HTK Alu 3500.31 Black Edition
Gross vehicle weight: 3,500 kg
Payload: 2,512 kg
Unladen weight: 988 kg
Internal dimensions: 3,140 x 1,750 x 350 mm
Tyres: 13 inch
Loading height: 740 mm
Load platform hydraulically tiltable with hand pump and electric pump
Tipping angle rear: 42°, lateral: 50°
- V-drawbar, fully hot-dip galvanized
- Chassis and tipping bridge hot-dip galvanized by immersion
- Tipping bridge made from one-piece steel construction
- 4-stage hard-chromed tipping cylinder
- Electro-hydraulic pump with manual backup
- 13-pin plug and reversing lights
- Drop sides made from 350 mm high aluminium, fully removable
Duedpjvtf I Usfx Afmsr
- Rear flap swing and tip function
- 6 lashing rings mounted on deck, tractive force 800 kg each, Dekra certified
- Jockey wheel
- Preparation shaft for aluminium ramps for easy retrofit
- Black drop sides
Price includes vehicle registration documents (Part II registration certificate and COC papers)
We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun
If required, we can provide a free transfer license plate.
We repair trailers from all manufacturers. Additional accessories available on request.
Technical and price changes as well as errors reserved. No liability for errors or printing mistakes.
Reverse-automatic, rubber spring axle, independent wheel suspension, tiltable load area, jockey wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, electro-hydraulic pump with manual backup, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, rear flap with swing function, 6 lashing rings mounted on deck, tractive force 800 kg each, Dekra certified, shaft for ramps prepared for easy retrofitting of aluminium ramps, black drop sides.
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 2700.27 Alu, 2670 x 1500 x 350 mm, 2,7 to.
Ara
Durumu: yeni, boş ağırlık: 643 kg, azami yük ağırlığı: 2.025 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.670 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 1,6 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.27 Permissible Total Weight: 2700 kg Payload: 2025 kg Unladen Weight: 675 kg Loading Dimensions: 2670 x 1500 x 350 mm Tyres: 13 inch Loading Height: 725 mm Loading area hydraulically tiltable with hand pump Tipping angle: rear 45°, side 50° - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from one-piece steel - 4-stage hard chrome-plated tipping cylinder - Hand pump; for GVW ≥ 3000 kg with electric pump and hand pump - 13-pin plug and reverse light - Drop sides made from powder-coated, galvanised steel sheet, completely removable - Rear tailgate can be swung - 6 lashing rings mounted on the platform floor, each with 800 kg lashing capacity, DEKRA certified - Jockey wheel - Channel pre-prepared for aluminium ramps for easy retrofitting Price includes vehicle registration document (Registration Certificate Part II and COC papers) We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price amendments and errors excepted. No liability for errors or misprints. Reverse auto-brake, rubber suspension axle, independent wheel suspension, tiltable loading area, jockey wheel, marker lights, galvanised steel sheet, braked, including warranty, V-drawbar hot-dip galvanised, chassis and tipping platform hot-dip galvanised, tipping bridge made from a single piece of steel, 4-stage hard chrome-plated tipping cylinder, hand pump, for GVW ≥ 3000 kg electric pump with hand pump, 13-pin plug and reverse light, side panels powder-coated, completely removable, rear tailgate can be swung, 6 lashing rings mounted on the bed, 800 kg tie-down force per ring, DEKRA certified, ramp channel pre-fitted for easy aluminium ramp retrofitting.
Dodsri Tbxspfx Afmsur
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 2700.27 E-Pumpe Alu, 2670 x 1500 x 350 mm, 2,7 to.
Ara
Durumu: yeni, boş ağırlık: 643 kg, azami yük ağırlığı: 2.025 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.670 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 1,6 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.680 mm, Manufacturer: Humbaur
Model: 3-way tipper HTK Alu 2700.27
Gross Vehicle Weight: 2,700 kg
Payload: 2,025 kg
Unladen Weight: 675 kg
Box Dimension: 2,670 x 1,500 x 350 mm
Tyres: 13-inch
Loading Height: 725 mm
Load area hydraulically tiltable with hand pump
Tipping angle: rear 45°, sides 50°
- V-drawbar, fully hot-dip galvanized
- Chassis and tipper bed, fully hot-dip galvanized
- Tipper bed made from one-piece steel
- 4-stage hard-chromed tipping cylinder
- Electric pump with hand pump
- 13-pin plug and reversing lights
- Side panels made of powder-coated, galvanized sheet steel, fully removable
- Rear flap, pendulum-type
Dodpfx Afsri Tb Aemeur
- 6 tie-down rings mounted on the bed, lashing capacity 800 kg per ring, DEKRA tested
- Jockey wheel
- Plank compartment, pre-configured for easy retrofit of aluminium ramps
Price includes vehicle registration documents (Registration Certificate Part II and COC papers)
We stock a large selection of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun.
Upon request, we provide free export/transfer license plates. We repair trailers of all makes. Additional accessories available on request.
Technical specifications, prices, and errors subject to change. No liability for mistakes or printing errors.
Self-reversing automatic system, Rubber-sprung axles, Independent suspension, Tiltable load area, Jockey wheel, Marker lights, Galvanized steel body, Braked, Including warranty, V-drawbar fully hot-dip galvanized, Chassis and tipper bed fully hot-dip galvanized, Tipper bed single-piece steel, 4-stage hard-chromed tipping cylinder, Hand pump, From 3,000 kg gross weight: electric pump with hand pump, 13-pin plug and reversing lights, Removable powder-coated side panels, Pendulum-type rear flap, 6 tie-down rings on floor (800 kg each, DEKRA certified), Plank compartment for easy aluminium ramp retrofit.
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3500.37 Alu, 3630 x 1850 x 350 mm, 3,5 to.
Ara
Durumu: yeni, boş ağırlık: 972 kg, azami yük ağırlığı: 2.500 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.630 mm, yükleme alanı genişliği: 1.850 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,7 m³, renk: diğer, inşaat yüksekliği: 1.210 mm, çalışma genişliği: 2.003 mm, Manufacturer: Humbaur
Model: 3-way tipper HTK Alu 3500.37
Gross vehicle weight: 3,500 kg
Payload: 2,500 kg
Unladen weight: 1,000 kg
Platform dimensions: 3,630 x 1,850 x 350 mm
Tyres: 13 inch
Loading height: 740 mm
Loading platform hydraulically tiltable using hand pump and electric pump
Tipping angle: rear 42°, side 50°
- V-drawbar, hot-dip galvanized
- Chassis and tipping frame, hot-dip galvanized by immersion
- Tipping frame made of one-piece steel
- 4-stage hard-chrome tipping cylinder
Dsdpfxorq Exbo Afmjur
- Hand pump; electric pump with hand pump from 3,000 kg gross weight
- 13-pin plug and reversing lights
- Side panels made of aluminium, 350 mm high, fully removable
- Rear flap can swing
- 8 tie-down rings mounted on the loading floor, each with 800 kg tensile force, Dekra certified
- Jockey wheel
- Channel prepared for aluminium ramps for easy retrofit
Price includes vehicle registration documents (Registration Certificate Part II and COC papers)
We stock a large selection of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun.
On request, we can provide a free temporary number plate for vehicle transfer.
We repair trailers from all manufacturers. Additional accessories available on request.
Technical modifications, price changes, and errors excepted. No liability for errors or printing mistakes.
Features:
- Automatic reversing system
- Rubber suspension axle
- Independent wheel suspension
- Tiltable loading platform
- Jockey wheel
- Marker lights
- Hot-dip galvanized chassis and tipper frame
- Braked
- Incl. warranty
- V-drawbar, hot-dip galvanized
- One-piece steel tipper frame
- 4-stage hard-chrome tipping cylinder
- Hand pump; electric pump with hand pump from 3,000 kg gross weight
- 13-pin plug and reversing lights
- Aluminium side panels, 350 mm high, fully removable
- Rear flap can swing
- 8 tie-down rings on the deck, each with 800 kg tensile force, Dekra certified
- Channel for optional aluminium ramps, ready for retrofitting.
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3500.31 Alu, mit Blechaufsatz 314x175x1000mm
Ara
Durumu: yeni, boş ağırlık: 988 kg, azami yük ağırlığı: 2.512 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur Model: 3-way tipper HTK Alu 3500.31 Permissible total weight: 3,500 kg Payload: 2,512 kg Unladen weight: 988 kg Bed dimensions: 3,140 x 1,750 x 350 mm Tyres: 195 50 R13C Load height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With 600 mm high sheet steel attachment, tiltable on all 4 sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized, immersion bath process - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg permissible total weight, electric pump with hand pump included - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear flap pivoting - 6 tie-down rings mounted on the platform, tensile force 800 kg per ring, DEKRA tested - Jockey wheel - Shaft preparation for easy retrofitting of aluminum ramps Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free export/transfer license plate. We repair trailers of all manufacturers. Further accessories available on request. Technical changes, price changes, and errors excepted. No liability for mistakes or typographical errors. Features: - Automatic reverse device, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high fully removable aluminum side walls, pivoting rear flap, 6 tie-down rings mounted on the bed, tensile force 800 kg per ring, DEKRA tested, shaft preparation for easy retrofitting of aluminum ramps.
Djdpfefbiavex Afmsur
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3000.31 Alu, mit Laubgitteraufsatz, 3140 x 1750 x 350 mm, 3,0 to.
Ara
Durumu: yeni, boş ağırlık: 907 kg, azami yük ağırlığı: 2.130 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur
Model: 3-Way Tipper HTK Alu 3000.31
GVWR: 3,000 kg
Payload: 2,130 kg
Unladen Weight: 870 kg
Body Dimensions: 3,140 x 1,750 x 350 mm
Tyres: 13 inch
Loading Height: 750 mm
Loading Platform: Hydraulically tiltable with hand pump and electric pump
Tipping Angle: Rear 42°, Side 50°
With mesh or steel extension sides, 600 mm high, hinged on all four sides
- V-drawbar, hot-dip galvanised
- Chassis and tipping bridge, hot-dip galvanised by immersion
- Tipping bridge made of one-piece steel
- 4-stage hard-chromed tipping cylinder
- Hand pump, for total weight above 3,000 kg: electric pump with hand pump
- 13-pin plug and reversing lights
- Aluminium side panels, 350 mm high, fully removable
- Rear flap pendulum-mounted
- 6 lashing rings fitted to platform floor, lashing force 800 kg each, Dekra tested
- Support wheel
- Shaft prepared for retrofitting with aluminium ramps
Price incl. vehicle registration documents (registration certificate part II and COC papers)
We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun.
Upon request, we provide a free temporary number plate for transfer.
We repair trailers of all brands.
Further accessories available on request.
Technical specifications, prices, and information are subject to change and errors excepted. No liability for errors or misprints.
Features: automatic reversing system, rubber torsion axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipping bridge hot-dip galvanised, braked, warranty included, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, for GVWR above 3,000 kg: electric pump with hand pump, 13-pin plug and reversing lights, aluminium dropsides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on platform floor, lashing force 800 kg per ring, Dekra tested, ramp shaft prepared for easy retrofitting with aluminium ramps.
Dsdpfxsktm Sus Afmeur
Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3000.37 Alu, 3630 x 1850 x 350 mm, 3,0 to.
Ara
Durumu: yeni, boş ağırlık: 972 kg, azami yük ağırlığı: 2.100 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.630 mm, yükleme alanı genişliği: 1.850 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,7 m³, renk: diğer, inşaat yüksekliği: 1.251 mm, çalışma genişliği: 2.022 mm, Manufacturer: Humbaur
Model: 3-Way Tipper HTK Alu 3000.37
Permissible Gross Weight: 3,000 kg
Payload: 2,100 kg
Unladen Weight: 900 kg
Body Dimensions: 3,630 x 1,850 x 350 mm
Tyres: 13-inch
Loading Height: 740 mm
Dodpel Dqldjfx Afmsur
Tilting Platform hydraulically tiltable via hand pump and electric pump
Tip angle: rear 45°, lateral 45°
- V-tow drawbar, hot-dip galvanized
- Chassis and tipping platform hot-dip galvanized
- Tipping bridge made of one-piece steel
- 4-stage hard-chromed tipping cylinder
- Hand pump; for gross weight from 3,000 kg, electric pump with hand pump
- 13-pin plug and reversing light
- Side walls made of aluminium, 350 mm high, fully removable
- Rear tailgate can be used as swing or removable gate
- 8 lashing rings mounted on the platform floor, each with 800 kg tensile force, Dekra certified
- Support wheel
- Preparation for aluminium ramps (ramp slots for easy retrofitting)
Price includes vehicle registration documents (Registration Certificate Part II and COC papers)
We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun.
On request, we can provide a free transit license plate.
We repair trailers of all makes.
Other accessories available on request.
Subject to technical modifications, price changes, and errors. No liability for mistakes or misprints.
Features: automatic reversing system, rubber spring axle, independent wheel suspension, tilting platform, support wheel, side marker lights, chassis and tipping platform hot-dip galvanized, braked, including warranty, V-tow drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump and - for gross weight from 3,000 kg - electric pump with hand pump, 13-pin plug and reversing light, aluminium side walls 350 mm high, fully removable, rear gate as swing or removable gate, 8 lashing rings on the platform floor (800 kg tensile force each, Dekra certified), ramp slots for easy retrofitting aluminium ramps.
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Neu-Ulm
2.271 km
Üç yöne devirmeli römork
Humbaur3-Seitenkipper HTK 3500.31 Alu, 3140 x 1750 x 350 mm, 3,5 to.
Ara
Durumu: yeni, boş ağırlık: 988 kg, azami yük ağırlığı: 2.512 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Total Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Bed Dimensions: 3140 x 1750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load Platform hydraulically tiltable with manual and electric pump Tipping Angle: Rear 42°, lateral 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized - Steel tipper body made from one piece - 4-stage hard-chrome-plated tipping cylinder - Manual pump, electric pump with manual pump from 3,000 kg permissible total weight - 13-pin plug and reversing lights - Removable aluminium side walls, 350 mm high - Swivelling rear tailgate - 6 lashing rings mounted to the bed, each with 800 kg tensile force, Dekra tested - Support wheel - Channel for ramps prepared for easy retrofitting of aluminium ramps Price includes registration certificate (Part II and COC documents) We have a wide range of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we provide a free temporary registration plate. We repair trailers of all brands. Additional accessories available on request. Technical changes, price changes and errors excepted. No liability for mistakes or typographical errors. Automatic reverse, rubber spring axle, independent wheel suspension, tilting platform, support wheel, marker lights, chassis and tipper platform fully hot-dip galvanized, braked, including warranty, V-drawbar fully hot-dip galvanized, steel tipper platform from one piece, 4-stage hard-chrome-plated tipping cylinder, manual pump, from 3,000 kg electric pump with manual backup, 13-pin plug and reversing lights, removable aluminium side walls 350 mm, rear tailgate swivelling, 6 lashing rings on the trailer bed, tensile force 800 kg per ring, Dekra tested, ramp channel prepared for easy installation of aluminium ramps.
Duodpfx Aorazk Usfmor
Küçük ilan
Tittmoning
2.089 km
Üç yöne devirmeli römork
HUMBAURHTK3500.37
Ara
Durumu: yeni, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.630 mm, yükleme alanı genişliği: 1.855 mm, yükleme alanı yüksekliği: 350 mm, Üretim yılı: 2025, YENİ araç Humbaur üç taraflı damperli, elektrikli pompa ve acil el pompası ile, tamamen çelik kasa, sarkaç bordürlü, 45 derece devirme açısı, 8 gömme sabitleme noktası, rampa haznesi, ayaklara hazırlık, alet kutusu hazırlığı, sıcak daldırma galvanizli. Hafif galvaniz hatalarından dolayı özel fiyat: 7.269 € + %19 KDV = 8.699 €. Fiyat, Hechenberg Tittmoning stoktan teslim. Stokta veya siparişle başka yeni ve kullanılmış römorklar da mevcut, özel yapım ve kişisel çözümler de mümkün. Ayrıca servis, tamir, TÜV, leasing, finansman, takas imkânı sunulmaktadır. DİKKAT: İşçi aranmaktadır (E/K/D), yarı zamanlı veya 580 € bazında.
Duedpfx Afexpzauomjr
Küçük ilan
Ergoldsbach
2.128 km
Üç yönlü damperli treyler
HumbaurHTK754020 Dreiseitenkipper Premium
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, ++Availability on request++
++Delivery possible, freight charges on request++
HTK 754020
Weights
Technically permissible gross weight: 7,500 kg
Drawbar load: 500 kg
Unladen weight approx.: 2,250 kg
Payload with standard equipment approx.: 5,250 kg
Dimensions
Platform dimensions (L x W x H): approx. 4,000 x 2,030 x 400 mm
Sideboard height: approx. 400 mm
Loading height (unladen): approx. 920 mm
Free drawbar length: approx. 1,900 mm
Coupling height (unladen): approx. 560-840 mm
Total L x W x H: approx. 6,070 x 2,200 x 1,450 mm
4 wheels: 215/75 R 17.5
Tipping angle lateral/rear: 45° / 48°
Oil requirement: 10 L
V-value mechanical: 14.8
V-value pneumatic: 11.1
2 pairs, 3,000 kg per lashing point; folding lashing rings recessed in corners
3 pairs, 2,000 kg per lashing point; lashing brackets recessed longitudinally in platform
---
Axles
Axle assemblies from renowned manufacturers;
Suspension
Maintenance-free parabolic suspension with load equalization;
Tyres
Tyres as per manufacturer’s choice;
Braking system
Dedpfx Afjwk Efmjmour
ABS braking system compliant with ECE regulations,
with ALB function;
ABS socket ISO 7638;
Spindle parking brake;
2x fail-safe coupling heads red/yellow ISO 1728;
Electrics
24-volt lighting system with multi-chamber taillights
and LED side marker lights;
15-pin connector plug for lighting;
Drawbar apparatus
Drawbar with 40 mm DIN towing eye, galvanized,
stepless adjustment via hand crank;
Chassis
Robust, welded and hot-dip galvanized frame;
Lockable storage compartment for 2 optional loading ramps;
Equipment
Side underrun protection rigidly mounted, from platform start to first axle
Mudguards on front and rear axles with splash protection system;
2 wheel chocks with holders;
Side and rear contour markings;
Space for single-line license plate;
Support
Heavy-duty automatic jockey wheel;
Hydraulics
Hydraulic three-way tipper system, controlled via towing vehicle (max. 200 bar);
Five-stage nitrided cylinder with stroke limiter and safety cables;
Hydraulic quick-coupler SVK BG3, single-circuit connection;
Platform
Floor plate made of 4 mm steel sheet;
Reinforced, hot-dip galvanized platform frame;
4 ball bearings with 2 fail-safe tipping bearing bolts;
Sidewalls
Laser-welded quality steel sidewalls, 400 mm high;
Sidewalls fold-down and removable;
Tailgate fold-down, removable and swinging, with central locking;
Front wall: steel, removable;
Side walls primed and painted to RAL shade (color of your choice);
+++
Without loading ramps => Optional at a surcharge of €1,590 net plus VAT
1 pair aluminium loading ramps
Incl. support legs at the rear
Length x Width approx. 3,050 x 400 mm
Load capacity approx. 4,390 kg/pair at 1,500 mm wheelbase
Weight per unit approx. 31 kg
Ramp angle approx. 16°
+++
+++
Sidewalls, platform and chassis frame hot-dip galvanized by immersion bath (sidewalls galvanized / not painted!)
+++
-- All information provided without guarantee -- Images may differ --
Küçük ilan
Ergoldsbach
2.128 km
Üç yönlü damperli treyler
HumbaurHTK 3500.41 2016
Ara
Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2024, Vehicle Description:
• Manufacturer: Humbaur GmbH
• Model: HTK-Garant TA G VD
• Variant: MF4S
• Version: 25
• Trade Name: HTK 3500.41 2016
• Vehicle Class: O2
---
Technical Data:
• Number of Axles / Wheels: 2 axles / 4 wheels
• Axle Spacing: 1–2 = 3,076 mm
• Wheelbase: 3,826 mm
• Length: 5,482 mm
• Width: 2,272 mm
• Height: 1,240 mm
• Loading Length: 4,102 mm
• Rear Overhang: 1,638 mm
• Coupling to Rear Distance: 5,445 mm
---
Weights:
• Unladen Weight (ready to drive): 950 kg
• Actual Vehicle Weight: 1,185 kg
Djdpfxewyw Hzj Afmour
• Permissible Gross Weight (laden): 3,500 kg
• Permissible Axle Load per Axle: 1,750 kg (per axle)
• Permissible Axle Group: 3,500 kg
• Vertical Load at Coupling Point: 150 kg
---
Tyres & Wheels:
• Tyre Combination (e.g.):
195/50 R13C 104N on rim 6Jx13 ET30
(additional permissible combinations, see remarks under item 52)
---
Braking System & Structure:
• Brake Connection: Mechanical
• Bodywork Code: DC10
---
Towing Equipment:
• Approval Mark: E1 55R-011594
• Key Values:
• D-Value: 31 kN
• S-Value (vertical load): 325 kg
---
Maximum Speed:
• 100 km/h
---
Notes on Trailer Classification:
Since this is an HTK (Humbaur tandem tipper) with high payload and a tiltable bed, this trailer is a:
Three-way tipper
--- All information without guarantee --- Images may differ ---
Sizin için aramayı kolaylaştırıyoruz: "humbaur ht fragmanlar"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Humbaur Ht Fragmanlar (553)
Şimdi 120.000’dan fazla ikinci el araçla TruckScout24 genelinde arama yapın.En popüler kategorileri inceleyin:
- Hapert R Fragmanlar
- Humbaur Bavul
- Humbaur Diğer
- Humbaur Flatbed/Branda
- Humbaur Fragmanlar
- Humbaur Ftk Fragmanlar
- Humbaur Garant Fragmanlar
- Humbaur Ha Fragmanlar
- Humbaur Hk Fragmanlar



































































































































































































































