Kullanılmış Fliegl Flt 216 Dolly Mit Nl Lzv Zulassung satın al (11.542)

Koşul: yeni, makine/araç numarası: 8fbda13da8c595f64678f0f82, boş ağırlık: 2.100 kg, azami yük ağırlığı: 11.300 kg, toplam ağırlık: 13.400 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 275/70 r 22,5, Further Information Chassis Central Axle Trailer Fine-grain steel welded construction Fifth wheel coupling, brand at our discretion, suitable for 2 king pins, with ball-bearing turntable, stop max. 20° Support at drawbar and at the front of the dolly Wheel chocks with holder Steel underrun protection Half-shell mudguards Central axle trailer coupling system CLG under-mount drawbar with approved 50 mm towing eyes for connection to dolly and truck, including drawbar lock on the truck! Axles + Suspension BPW disc brake axles Air suspension Crodpsi Rizxsfx Aldsb for Swap Train version, standard fifth wheel height lowered approx. 1100 mm, raised approx. 1280 mm, coupling height approx. 1140 mm, Braking System 2-line compressed air braking system, color-coded piping for easy service. Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connection lines to the truck 2 fail-safe coupling heads with spiral-flex connection lines to the trailer EBS, electronic braking system with EBS plug at the front, with connection cable, EBS spiral-flex connection lines to the trailer Attention: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! with raising & lowering, ECAS, via truck controls, ECAS CAN 2 bus required in the truck. Without ECAS CAN 2 bus in the truck, additional control unit in the truck required (not included): Electrics with pre-wired cable and a distribution box. Operation via 15-pin socket pins 11 and 15 or for 2 x 7-pin sockets pins 7 and 5. Note! This version must still be technically approved in conjunction with the trailer. Dolly and trailer can presumably only be raised and lowered together; if this is not technically feasible, operation is via WABCO eTASC with hold function in the lowered position + auto-reset function (no power from the truck required). Additional operation on vehicle via WABCO eTASC + hold function in the lowered position + auto-reset function (no power from truck required) Vehicle - Driving Stability System ECAS only possible in conjunction with WABCO EBS. Axle load detection via EBS CAN bus signal for display in the driver’s cab (truck must be prepared accordingly, no truck installation/no calibrated scale) Brake release function from the truck (via switch) on pin 14 and additionally via switch on the vehicle next to raise & lower valve, for releasing the brake when coupled, EBS power supply must be ensured! With CAN router Wheels and Tires 275/70 R 22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting Side-mounted yellow LEDs linked to turn signals, flashing side markers 2 white LED position lights at the front 2 white/red lane-marking lights at the rear 2 x 7-pin fail-safe connectors at front, with connection cable, 2 x 7-pin fail-safe connectors with spiral-flex connection lines to the trailer Cable + plug/socket for reversing camera system, depending on vehicle type Operating Instructions Note! Observe the Long Truck Regulation! Please observe currently approved route network! Towing vehicle must be brought to Triptis factory for approx. 1 week for drawbar adaptation! Please observe CLG recommendations per attachment Mandatory before order acceptance: Submission of all relevant dimensions as per Fliegl CLG form (see attachment) The coupling height of the planned trailer must be known Fliegl Fahrzeugbau assumes no liability for defects in dimensional accuracy and drivability

Koşul: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Steel rear underrun guard Crodpfx Alsi Ri Iajdeb Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Steel twin wheels, factory silver Electrics 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Csdpfsi Ri Ryox Aldjrb Country of approval: Germany Incl. with Dekra approval and certificate (acco

Koşul: yeni, makine/araç numarası: a0a72d14f9b44bce47bc25ffb, dingil konfigürasyonu: 1 dingil, lastik boyutu: 11,5/80-15,3 alliance, Further information: 40mm towing eye Support leg with wheel Tyres: 11.5/80-15.3 Alliance Without suspension Credpoi Ri D Tofx Aldjb Towing eye to centre of fifth wheel: 3,200 mm Tyre load capacity: 5,800 kg at 30 km/h + 5,150 kg at 40 km/h No road approval, for internal use only!

Koşul: yeni, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm incl. rear incline Further information plus preliminary freight / provision ex warehouse 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Outer frame with slight slope, new design with 'Load-Lock profile' for lashing strap attachment Pair of lashing eyes outside in the floor, each rated at 5t 1x at the front corners, 1x before and 1x in the rear incline at the back 6 pairs of lashing eyes outside in the floor/outer frame, each 5t Support jack at the front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Csdpfx Aeyl E Dqjldsrb Full-width rear splash guards (not in combination with forklift holder) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Central axle trailer drawbar system Drawbar with tested 40 mm towing eye Drawbar height adjustable by spindle, max adjustment range 300 mm Axles & Suspension GFA or BPW axles as per manufacturer’s selection, with tapered roller bearings and S-cam brake 'Axles/chassis laser-measured': reduces tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber mounting and mechanical axle load equalisation (rocker compensation) Brake system 2-line compressed air braking system Coloured line routing for easy service Hand spindle parking brake 2 non-interchangeable coupling heads at front, with connecting lines to tractor unit, 24 volt ABS and ALB, ABS plug at front, with connecting cable, Note: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Wheels and Tyres 235/75 R17.5, brand as per manufacturer’s selection Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front in LED 2 white/red lane marker lights at rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable Floor Steel/chequer plate floor for high point loading capacity Note: slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear incline approx. 900 mm Front wall / front corner posts 25 mm aluminium hollow section, 400 mm high Side walls 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts Without centre posts Rear wall / rear corner posts 1 pair of steel posts fixed to the frame with bracket for securing loading ramps, entry width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps with wooden covering (tip area with steel/chequer plate) with gas strut for single-person operation Operating notes The stated gross weight is technically feasible; depending on the load, the gross weight may not be achievable within the permitted axle, support, and kingpin loads. (Poor driving and tracking behaviour due to incorrect load distribution possible.) Country of Registration / Plates Germany with Dekra inspection and certificate (per §13 EG - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape to ECE R 048, side white and rear red Painting Frame DB 7350 Novagrau Front wall aluminium Side wall aluminium anodized Loading ramps hot-dip galvanised

Koşul: yeni, makine/araç numarası: dc46d2e1cd272305b99fb3160, boş ağırlık: 9.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Vehicle consists of: Chassis: Low-bed semi-trailer Steel welded construction, kingpin plate with replaceable 2-inch kingpin and two kingpin positions 24 t, 2-speed landing gear, operated from one side, with straight foot, without telescopic compensation Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Quarter-circle mudguards in front of and behind axle modules 1st pair of wheel recesses sunken into the low-bed loading area behind the gooseneck, bevelled for entry. Length at base approx. 1,600 mm, depth of recesses approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area. 2nd pair of wheel recesses between axles A and B. Length at base approx. 350 mm, depth approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area. If wheel loaders are to be transported and the total height needs to be checked, please provide the technical data sheet for the respective wheel loader types with precise dimensions (if total height is exceeded -> customer assumes risk, permit required); depending on ground clearance under the machines, inserts in the wheel recesses may be required on the customer's side. Wheel recess covers pull-out from the main frame, with wooden inlays. Extensions can be pulled out to 3,000 mm (not possible in rear slope area and not at the base of the wheel recesses) (track width of construction machines/vehicles to be transported must not exceed external frame width of 2,550 mm). Storage compartment for wooden planks on gooseneck, transverse at the front 70 mm wooden planks for widening to 3,000 mm Tie-down points on low-bed 2 pairs of ring lashing eyes, each 5 t, at the front on the gooseneck 11 pairs of lashing points (Zurrpilze) recessed into the top and side of external frame, each 10 t - 2x on gooseneck - 9x on low-bed deck (first eye 250 mm from the front, last max. 250 mm from the rear, distance between eyes not greater than 1,100 mm) 8 pairs of stanchion sockets recessed in the external frame, internal dimensions 70 x 40 mm, or alternatively 5 t ring lashing eyes recessed in the floor instead of sockets Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 to manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at front, no connection cable Attention: The trailer may only be towed by tractors that ensure full ABS functionality! 2 non-interchangeable coupling heads at front, without connecting pipe With lifting & lowering valve Axle load detection via EBS CAN bus signal, for indication on the truck’s cab display – truck must be pre-equipped accordingly, not truck-installed (not certified as a weighing system) Vehicle stability control system Electrics 24 volts, multi-chamber lights, yellow LED side marker lights Crodpfxei Ri Hco Aldjb 2 white position lights at the front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cable 1 x LED beacon with bracket, controlled via parking light (rotating beacon detachable) 2 pairs of warning boards, double-sided, LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel/checker plate covering Storage box integrated in inclined drive-over area to gooseneck - Then 70 mm softwoo

Koşul: yeni, makine/araç numarası: 3c70e9a5d82cfb3ada79baf95, boş ağırlık: 8 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 26 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 205 / 65 r 17,5, Further Information Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order! Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons 24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation Rear support foldable, mounted externally Chocks with holder Side underrun protection, aluminium Underrun protection, steel, for EU standards, if technically feasible Quarter-shell mudguards with anti-spray mud flaps to EU standards 1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement. Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts. Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel. Axles + Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto reset function Wheels and Tyres 205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h manufacturer’s choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 foolproof couplings at the front, without interconnecting line EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021) Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system) Electrics Cedsi Ri Hropfx Aldjrb 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable Floor Gooseneck with steel / checker plate covering 30 mm phenolic plywood floor, in the lowbed between the main beams, center In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering. Ramps Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for access to the lowbed Pair of steel ramps for crossing onto the gooseneck Side Boards Registration / Plates Registration country: Germany with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation) Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, yellow on sides

Koşul: yeni, makine/araç numarası: 7dbf076fea9ec110acb399f8f, boş ağırlık: 5 kg, azami yük ağırlığı: 32 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further information Chassis: semi-trailer container Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with rear Center telescope 1st stage, rear extension extended to 1st stage: 2 x 20 ft or 1 x 40 ft with or without gooseneck tunnel Center telescope 2nd stage, rear extension extended to 2nd stage: 1 x 45 ft with gooseneck tunnel, with rear overhang Center telescope 2nd stage, front extension extended to 1st stage, rear extension extended to 2nd stage: 1 x 45 ft with long gooseneck tunnel and chamfered corners Center telescope as overlapping central tube frame with locking pin, with adjustable rear height and folding center supports for containers without tunnel Plug-in and removable front container guides (electrics, air, and brake connectors located at the front crossmember) Plug adapter for front lock, for securing containers without tunnel from underneath, with holder for when not in use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, operated by hand crank 24 t 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Extendable rear underrun protection for 45 ft containers Half-shell mudguards with EU-compliant anti-spray flaps Rear impact guard Axles & Suspension SAF disk brake axles with 430 mm disc diameter Axles/chassis laser-measured to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and start assist, activation by 3x braking (start assist operative up to 30% axle overload and up to a speed of max. 25 km/h) Braking system 2-line compressed air brake system, color-coded routing for easy service. Spring-loaded parking brake Tele Control Axle relief for easy telescoping Cedpfxsi Ri R Se Alderb 2 non-interchangeable coupling heads at front, without connection line EBS, Electronic Braking System with EBS socket at the front, no connection cable Note: The trailer may only be towed by tractors that ensure the ABS functionality! With raise and lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, display in driver's cab, truck must be appropriately pre-equipped, no truck installation (not legal-for-trade scale) Wheels and Tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volts, multi-chamber lights, rear and brake lights in LED, side yellow LED lighting (Note: With certain tractors, error messages may appear even if all functions operate properly.) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cable Operating instructions When transporting 45 ft container with short tunnel, with or without front extension, the permitted system length from kingpin to end of vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration country / plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plates

Koşul: yeni, makine/araç numarası: 1f4581c873ed977cb9602039b, boş ağırlık: 3 kg, azami yük ağırlığı: 34 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Semi-Trailer Container Fine-grained steel welded construction; fifth wheel with replaceable 2-inch kingpin Container mountings: 1 x 20-foot central position (or swap body container 7.15 / 7.45 m), front not retractable, container lock twist locks in extended version 24 t two-speed landing gear, single-sided operation, with straight base, without stroke compensation 2 wheel chocks with holders Side underrun protection Aluminum rear underrun protection Half-shell mudguards With anti-spray mud flaps according to EC Stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip plate, with perforated step plates, approx. 400 mm wide, left & right between drip tray and longitudinal beam 4 hose trays approx. 4500 mm long (hose box) for pipe diameters: 2 x DN 200 externally + 2 x DN 160 centered, rear hose box (stainless steel) 300 mm deep, splash-proof, cover (stainless steel) all-around with rubber seal, drain hole at the lowest point, then without cover on hose pipes 1 stainless steel grounding lug at the rear in FR-right on the frame, with international grounding label on the frame Access steps rear right on the underrun protection, rear in FR-right outside on the main beam step plate approx. 260 mm long and 300 mm wide Axles & Suspension SAF disc brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Axle spacing offset mm (Combined Transport) up to 44 t gross train weight Air suspension 1st axle with automatic lift axle, including forced lowering and start-assist, operation via 3 x braking (start-assist active up to an axle overload of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Color coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, no connecting cable Note: The trailer may only be towed by tractor units that ensure ABS functionality! With raise/lower valve Vehicle - dynamic stability control system Axle load detection via EBS CAN bus signal, for display in the driver’s cab, truck must be appropriately pre-equipped, no truck installation (no calibrated weighing system) Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front Crjdoi Rixkopfx Aldeb 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, no connecting cable Operating notes The stated gross weight is technically possible, but depending on the cargo, the gross weight cannot always be reached while adhering to permissible axle, support and fifth wheel loads (poor handling and tracking may occur due to incorrect load distribution) This vehicle may only be loaded with 20’ tank containers conforming to ISO 668 and especially ISO 1496-3! The tank containers must have end-load-transfer areas (end transverse beam load transfer zones)! Country of registration / License plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate according to ECE - 70 ADR approval according to section 9.1.1.2 of the ADR, EX/II, EX/III / type approval for vehicles for the carriage of certain dangerous goods (ex.B3) with warning plate at the rear, not valid for substances under UN 0331 and 0332 (explosives B-E) Outline marking

Koşul: ikinci el, azami yük ağırlığı: 28.933 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2015, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 3.000 mm, yükleme alanı hacmi: 101 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, * Edscha sürgülü tavan * Haldex EBS, ABS, LSV * Kaldırma aksı * Takım sandığı * BPW Eco Plus disk frenli dingiller Crsdsvhvcfepfx Aldjb ----* Lastik ebatı: 385/55R19,5 * Toplam uzunluk: 13.850 mm * Boş ağırlık: 6.067 kg * TÜV & SP: Süresi dolmuş -----Hatalar ve ara satışlar saklıdır Araç numarası: 5726 WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bizimle WhatsApp üzerinden rahatça iletişime geçebilirsiniz Whatsapp Whatsapp

Koşul: ikinci el, azami yük ağırlığı: 28.933 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2015, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 3.000 mm, yükleme alanı hacmi: 101 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, * Edscha kayar tente tavan * Haldex EBS, ABS, LSV * Takım sandığı * BPW Eco Plus akslar, disk frenli Crsdpfxovhv H Re Aldob ----* Lastik ebatı: 385/55R19,5 * Toplam uzunluk: 13.850 mm * Boş ağırlık: 6.097 kg * TÜV & SP: süresi dolmuş -----Hatalar ve ara satış hakkı saklıdır Araç numarası: 5732 WhatsApp desteği mevcuttur! Araçla ilgili sorularınız veya daha fazla bilgi için lütfen bize WhatsApp üzerinden rahatça yazın. WhatsApp WhatsApp

Koşul: yeni, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl Tandem Low Loader with Ramps, Type TPS 118 Chassis fully hot-dip galvanized – side walls aluminum Vehicle in ongoing production – delivery time approx. two weeks Gross weight: 11,800 kg Unladen weight: 2,960 kg Payload: 8,840 kg Overall length: 8,000 mm Loading length: 6,200 mm including rear slope Width: 2,550 mm Loading height: 900 mm Further Information plus pre-transport / provisioning ex stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer High-tensile steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for attaching lashing straps 3 pairs of lashing rings (external, in floor), each 5 t 1 in front corners, 1 at and 1 within the rear slope Pair of lashing rings (external in the floor/outer frame), each 5 t Support leg at the front Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminum Rear underrun protection, galvanized steel Full-width rear mudflap (not in combination with forklift holder) Partial round fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Towing equipment: central axle trailer Drawbar with tested 40 mm towing eye Drawbar height adjustable by spindle, max adjustment range 300 mm Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes Crsdpfjv E Dqlsx Aldeb "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalization) Brake system Two-line compressed air braking system Color-coded piping for easier servicing Manual spindle parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at the front and connection cable Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 Volt, multi-chamber lighting, lateral yellow LED lighting 2 white front position lights in LED 2 white/red marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable Floor Steel/chequer plate flooring for high point load tolerance Note: Slight floor undulation due to welding distortion possible! Platform length approx. 6,200 mm Rear inclination approx. 900 mm Front wall/corner stanchions 25 mm aluminum box section, 400 mm high Side walls 25 mm aluminum box section, 400 mm high, foldable and removable Middle stanchions 1 pair folding stanchions, sidewall height, foldable and removable Rear wall/rear corner stanchions 1 pair steel stanchions attached to frame, with holders for securing the ramps Entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with grab handle on ramps wooden covering (tip area with steel/chequer plate) gas spring assisted for single-person operation Paintwork Chassis hot-dip galvanized including passivation “15 years warranty against rust-through” Front wall painted RAL 9006 White Aluminum Drop sides painted RAL 9006 White Aluminum Loading ramps hot-dip galvanized Finance lease offer: 48 months term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Koşul: yeni, azami yük ağırlığı: 32.100 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, NEW VEHICLE Fliegl 3-axle low bed semi-trailer with ramps, model SDS 470 T Gross weight: 41,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 32,100 kg / 38,100 kg Overall length: 13,300 mm Loading bed: 9,200 mm Ramps: 2,800 mm x 750 mm with spring assist Csdpfx Aljk N Aflsdorb Air suspension Excavator arm recess Large lashing package 70 mm wooden floor SAF axles, 3rd axle is a self-steering trailing axle plus pre-carriage / handling ex yard Wiesmoor €1,280.00 / net Vehicle is available immediately from stock. Hire purchase offer: 48 months term, 40% residual value, down payment only the VAT. Monthly installment EUR 999.00 (payable net only)

Koşul: ikinci el, makine/araç numarası: WFDFLT21301009183, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2019, renk: diğer, Üretim yılı: 2019, Daha fazla bilgi için lütfen bizimle iletişime geçin. Csdjx Sdaxopfx Aldorb

Koşul: ikinci el, makine/araç numarası: WFDFLT21301008851, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2019, renk: diğer, Üretim yılı: 2019, Daha fazla bilgi için lütfen bizimle iletişime geçin. Crodpfx Ajxbf Dusldjb

Koşul: ikinci el, Üretim yılı: 2019, çalışma saatleri: 1.058 h, Wacker Neuson DW50 Wheel Dumper with Swivel Tip Skip Power: 55.4 kW Deutz Engine Unladen Weight: 3,495 kg Gross Vehicle Weight: 7,460 kg Payload: 5,000 kg Rotating Beacon Front Camera Accessories: Cjdpfx Alju A Npxsdjrb - TÜV Inspection Certificate - Registration Certificate (Part I and II)

Koşul: ikinci el, kilometre: 358.000 km, güç: 375 kW (509,86 bg), ilk tescil: 06/2020, yakıt türü: dizel, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, frenler: retarder, renk: yeşil, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 24 m³, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.300 mm, yükleme alanı yüksekliği: 1.600 mm, Üretim yılı: 2020, Donanım: ABS, elektronik denge programı (ESP), klima, Mercedes-Benz Arocs 4451 Fliegl Asphalt Tipper Push-off Sliding Tarp Lift/Steering Axle Euro 6 Internal Ref. No. for Inquiries: 0426380 * Condition: Very good * Power: 375 kW / 510 HP * Unladen weight: 17,500 kg * Gross vehicle weight: 40.00 t * Suspension: Leaf/Air * ABS * ASR (traction control) * ESP (electronic stability program) * Rear axle differential lock * PTO (power take off) * Push-off system * Emission standard: EURO 6 * Transparent external sun visor * Air-suspended comfort driver's seat * Driver's seat heating * Air conditioning * 24/12V connection * Electric windows (driver/passenger) * Electrically heated and adjustable mirrors * CD radio / USB / AUX / Bluetooth * Mechanical roof hatch * Multifunction steering wheel * Onboard computer * Fog lights * Fuel tank: 290 L aluminum, left side * Light and rain sensor * Lift axle * Steering axle Body: Asphalt tipper with moving floor * Thermo-insulated body * Manufacturer: Fliegl * Electric sliding tarp Codpey Eug Njfx Aldsrb * Remote control Tyres: 1st axle: 385/65 R22.5 30% leaf suspension 2nd axle: 385/65 R22.5 20% leaf suspension, steering axle 3rd axle: 315/80 R22.5 25% air suspension 4th axle: 315/80 R22.5 25% air suspension 5th axle: 385/65 R22.5 20% air suspension, lift axle, steering axle --- Price: 64,900 Euro + 19% VAT. For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and ????? Subject to errors, omissions, and prior sale.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2010, süspansiyon: hava, lastik boyutu: 385/55R22,5, dingil mesafesi: 11.280 mm, renk: diğer, Üretim yılı: 2010, Donanım: ABS, = Additional options and accessories = - EBS = Remarks = Number of axles: 2, Payload: 30,320 kg, Curb weight: 11,680 kg, Gross weight: 42,000 kg, Suspension type: Full air suspension, ABS, EBS, Body year: 2010, Axle type: BPW = Further information = General Information Cab: Day cab Registration number: OL-69-DV Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tire size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread left: 4 mm; Tire tread right: 5 mm Axle 2: Steered; Tire tread left: 4 mm; Tire tread right: 4 mm Weights Unladen weight: 11,680 kg Payload: 30,320 kg GVW: 42,000 kg Environment Emission class: Euro 0 Condition General condition: moderate Technical condition: moderate Optical condition: moderate Damages: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, construction years, and price categories. Why buy at Kleyn Trucks? It’s simple! • Large, fast-changing stock • Recognizable quality • Good prices • Reliable trading practices • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more... Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is available in most European countries! Crsdpfew Da A Hsx Aldjb Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Koşul: yeni, boş ağırlık: 3.100 kg, toplam ağırlık: 18.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2026, süspansiyon: hava, lastik boyutu: 4-fach 385/65 R 22,5, dingil mesafesi: 1.310 mm, renk: gri, Donanım: ABS, Orta dingilli değişken taşıma römorku, yeni araç. Standart tasarım. Yükleme rampası ve geçiş plakası ile donatılmıştır. Römork ve çekme kolu: sıcak daldırma galvanizli. Şasi, 7.150 ila 7.450 mm değiştirilebilir üst yapılar için tasarlanmıştır. Liftsiz dingil yoktur. Boşta sürüş yüksekliği: 1.240 mm. Bağlantı yüksekliği: 1.040 mm, yüksek bağlantı (aşırı yüksek bağlantı). Toplam ağırlık: 14.000 kg, 18.000 kg'a kadar artırılabilir. 1.220 - 1.320 mm park yükseklikleri için uygundur. Sabit, kıvrımlı çekme kolu, 40 mm çekme halkası. Lastikler: 4 adet 385/65 R22,5 (üretici seçimi). Yedek lastik ve yedek lastik tutucu yoktur. Yedek lastik ek ücret karşılığında temin edilebilir. Cedpjxap Hdefx Aldsrb Elektrik: 15 veya 2x7 kutuplu, müşteri isteğine göre dâhildir. Hava: Duomatic veya Sarı/Kırmızı, müşteri isteğine göre dâhildir. Aksesuarlar ek ücretle temin edilebilir. Belirtilen tüm değerler yaklaşık olup mm ve kg cinsindendir. Teslimat tarihi sorunuz. Leasing mümkündür. Teklif bağlayıcı değildir, ön satış hakkı saklıdır. Fiyatlar D-59558 Lippstadt-Rixbeck lokasyonundan, KDV hariçtir. Daha fazla ürüne şuradan ulaşabilirsiniz: .

Koşul: yeni, boş ağırlık: 3.100 kg, toplam ağırlık: 18.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2026, süspansiyon: hava, lastik boyutu: 4-fach 385/65 R 22,5, dingil mesafesi: 1.450 mm, renk: gri, Donanım: ABS, Central axle swap body trailer, new vehicle. Design: Standard, WITH lift axle. Type HWZCB1874. Frame hot-dip galvanized. Stainless steel air reservoir. Axles (BPW or SAF, manufacturer selection), ABS/EBS disc brakes. Dimensions: L = 9,250 mm, W = 2,480 mm, unladen weight: 3,100 kg. Coupling height: approx. 800 mm, coupled high position. Lift height top: 1,400 mm, lift height bottom: 1,180 mm, ride height: 1,220 mm. Suitable for stand heights from 1,220 to 1,320 mm. Tyres: 4 x 385/65 R22.5 (manufacturer selection) incl. twin spare wheel carrier and mounting kit for electronic wheel. No spare wheel included. Spare wheel available at extra cost. Suitable for transporting standardized swap bodies according to EN 284 size C715 and C745. Suitable for transporting standardized containers according to ISO 668/1496, size 20‘. Front support with crank and gearbox. Rear support with 2 galvanized, foldable, and height-adjustable landing legs. Drawbar with bolted ø 50 mm towing eye. Drawbar length adjustable. Lighting and signalling system according to EU standards: Multi-chamber tail lights, License plate light, LED side marker lights, LED front position light, and LED lane position lights at the rear. Wheel guards and spray suppression system compliant with EU directive. Electrics: 15-pin or 2 x 7-pin as per customer specification included. Air: Duomatic or yellow/red as per customer specification included. Accessories available at extra cost. All values stated are approximate in mm and kg. Delivery date upon request. Leasing possible. Offer is subject to change without notice, prior sale reserved. Crjdpsr Il Dhofx Aldeb Prices net ex location D-59558 Lippstadt-Rixbeck. For more listings visit

Koşul: yeni, boş ağırlık: 2.974 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2026, süspansiyon: hava, lastik boyutu: 4-fach 385/65 R 22,5, dingil mesafesi: 1.310 mm, renk: siyah, Donanım: ABS, Central axle swap body trailer, new vehicle. Specification: Standard version, with lift axle. GVW 18t. Axles (BPW, manufacturer’s selection), ABS/EBS disc brakes. Dimensions: L = 8,963 mm, W = 2,480 mm, unladen weight: 2,985 kg. Coupling height: 800 mm, high-coupled. Lift height (top): 1,320 mm, lift height (bottom): 1,220 mm, driving height: 1,255 mm. Suitable for drop-off heights from 1,220 to 1,320 mm. No toolbox contrary to photo. Wheels fitted with internal sensors and tyre pressure monitoring system in accordance with UN ECE R 141 (TPMS). Tyres: 4 x 385/65 R22.5 (manufacturer’s selection) without spare wheel carrier. Spare wheel available at extra charge. Suitable for the transport of standardised swap bodies to EN 284 sizes C715 and C745. Suitable for the transport of standardised containers to ISO 668/1496 size 20’. Rated down to 12 t with 40 mm towing eye. With lift axle. Attention: Lift axle operates only when unladen, with max superstructure weight of 3 t. Please note: When rated-down and equipped with a 40 mm towing eye, the lift axle function is disabled. The vehicle must be fully unloaded as even the empty weight of a swap body/platform is enough to disable the lift axle function. Front support with crank handle and gearbox. Rear support with 2 galvanised, folding and height-adjustable support legs. Drawbar with bolted 50 mm towing eye. Drawbar length (measured from centre of towing eye to front wall): 1,650 mm. Additional push-button for activating the 'brake release function' to relieve tension when raising the body. Lighting and signalling equipment in accordance with ECE 48: Crjdpfx Alor Il Ddodjb LED side marker lights with direction indicator (flashing function), 2 LED outline marker lights on rubber stalks, LED multi-function tail lights, 2 LED licence plate lights, 1 reversing light and 1 additional LED reversing lamp. Wheel covers and spray suppression as per EU directive. Electrics: 15-pin or 2x7-pin as per customer request included. Air: Duomatic or yellow/red to customer preferences included. Accessories available at extra cost. All specified values are approximate and stated in mm and kg. Delivery date on request. Leasing available. Offer subject to change, prior sale reserved. Prices net ex works D-59558 Lippstadt-Rixbeck. Further vehicles available at .

Koşul: ikinci el, güç: 130 kW (176,75 bg), yatak sayısı: 2, koltuk sayısı: 4, yakıt türü: dizel, vites türü: otomatik, renk: gri, ilk tescil: 12/2025, toplam uzunluk: 6.890 mm, toplam genişlik: 2.200 mm, toplam yükseklik: 2.820 mm, dingil konfigürasyonu: 2 dingil, emisyon sınıfı: Euro 6, toplam ağırlık: 4.000 kg, işletme ağırlığı: 3.169 kg, azami yük ağırlığı: 831 kg, Üretim yılı: 2024, dingil mesafesi: 364 mm, Donanım: aracın içi mutfak, Van TI. The Agile One. Large enough to feel like a true motorhome, yet compact. Narrow on the outside, but inside it impresses with a spacious living area, open sightlines, a modern ambiance, stylish design accents, and thoughtfully designed storage solutions. Total savings of €19,383. This vehicle has received a day registration. Vansation Equipment: * Indum Grey Metallic chassis * Navigation system * Digital radio reception DAB+ * Reversing camera * Ambient lighting with full LED technology * Additional air suspension on rear axle * Thule Omnistor awning * Insulated & heated waste water tank * 27" Smart TV + TV mount * Automatic Oyster satellite system * Vehicle length under 7 m, permitted gross weight 3,500 kg TraumMobil Equipment: * VW Crafter 4000 kg chassis * Engine output 130 kW (177 HP), automatic transmission * Bicycle rack in rear garage * DuoControl incl. crash sensor * EvoPore mattress with Watergel top * Remote display for DuoControl * Seitz S7 framed windows * Rear side window, left * L-shaped lounge with single-column lift table * Additional onboard battery Cedpjyd N Rrsfx Aldjrb * Thule garage organization system * Light & assistance package 3 * Panoramic roof window, rear * Electric entry step * Exclusive habitation door OPTIONAL: SAVE NOW €2,000 ON OUR LARGE SELF-SUFFICIENCY PACKAGE * 2,000 W inverter * Solar system 2 x 110 W * 2 x 100 Ah lithium battery SURCHARGE: only €3,190 Do you have questions or requests regarding this dream motorhome? Feel free to contact us, and let’s realize your travel plans together. We are ready to provide advice and support, and help you find the perfect vehicle for your needs. We look forward to hearing from you! Your Spürkel Sales Advisor Team. The traditional company in Bochum. Note: The photos are sample model images. Please refer to the description for detailed equipment specifications. Model/Year: 2024, 2024, Internal ID: 6001_40651_2017, Emissions class/standard: Euro 6d-final, Base vehicle: VW Crafter, Engine details: 2.0 l TDI, Euro 6d-Final, Transmission: automatic, Interior height: 196 cm, Mass in running order: 3,169 kg, Payload: 831 kg, Maximum technical permissible weight: 4,000 kg, Beds: single bed, Sleeping surfaces: rear (201x85, 201x77), Number of belted seats: 4, Wheelbase: 364 cm, Heating: Truma Combi 6, Fridge capacity: 142 l, Fresh water tank: 95 l, Waste water tank: 95 l, Battery: 80 Ah, Upholstery: Winter White, 230V outlets: 6, 12V outlet: 1, USB outlets: 2, Additional info: day registration, VEHICLE DOCUMENTS: Owner’s manual (German), TÜV and registration papers, SERVICE HATCHES / GARAGE DOORS: Service/storage compartment hatches and garage door/hatch with one-handed operation, Easy access to gas locker via service door on the side wall, longitudinal gas bottle arrangement, gas locker for 2 x 11 kg gas cylinders, Garage door 80 x 110 cm, right, KNAUS ServiceBox, Service hatch for ServiceBox 70 x 40 cm, front left, Garage door 80 x 110 cm, left, DOORS: Single-key locking system, insect screen door, ACCESSORIES: 10-year water ingress warranty, MediKit voucher, soap and dish detergent dispenser, tire repair kit: 12-volt compressor and tire sealant, CHASSIS / RUNNING GEAR / AIR CONDITIONING / MULTIMEDIA / TRANSPORT SYSTEMS: Left-hand drive, ESP, hill holder, ABS, electronic immobilizer, electromechanical power steering, fuel tank 75 liters.

Koşul: ikinci el, kilometre: 483.000 km, güç: 353 kW (479,95 bg), ilk tescil: 09/2008, yakıt türü: dizel, toplam ağırlık: 26.000 kg, frenler: retarder, vites türü: mekanik, emisyon sınıfı: Euro 5, Donanım: is filtrasyon filtresi, - Retarder - Lift and steering axle - Air conditioning - Manual transmission - Trailer with winch - Loglift F265Z 2008 Crodpfev Iixgox Aldeb Suspension: leaf/air

Koşul: yeni, kilometre: 500 km, güç: 70 kW (95,17 bg), yakıt türü: elektrikli, toplam ağırlık: 4.250 kg, renk: beyaz, koltuk sayısı: 3, toplam uzunluk: 6.040 mm, toplam genişlik: 2.200 mm, toplam yükseklik: 2.780 mm, yükleme alanı hacmi: 15 m³, yükleme alanı uzunluğu: 3.400 mm, yükleme alanı genişliği: 2.080 mm, yükleme alanı yüksekliği: 1.570 mm, Üretim yılı: 2023, * Orten CityRollup superstructure * All-aluminium body with sectional roller shutter doors * 2 compartments of 2,057 mm each + 2 compartments of 1,320 mm each * DEKRA certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km Crodpfjqz R Dmox Aldeb * Lithium iron phosphate battery * Battery capacity 80 kWh 400 V * Leaf spring suspension ORTEN Electric-Trucks E 35 with roller shutter superstructure: Pricing takes into account applicable subsidies Chassis Technical Data: Manufacturer: ORTEN Vehicle class: N2 Gross vehicle weight (GVW): 4,250 kg (drivable with license class B) Curb weight: 2,295 kg Wheelbase: 3,745 mm Tyres: 185/75 R 16C Features: Seats 1+2 * Rear axle final drive ratio: i = 4.1 * Rear axle stabilizer * Front disc brakes * Rear drum brakes * Driver airbag * Fog lights * Heat-insulating glass * Driver’s seat version "Luxury" * Central locking * Electrically adjustable exterior mirrors * Storage compartments in front doors left and right * 2DIN multimedia with USB port * Hands-free system * ABS * Summer tyres * Spare wheel, supplied loose * Wheel chock with holder (for vehicle class N2) * Cab paint finish similar to signal white RAL 9003 * Chassis paint finish graphite black * Wheel rims painted silver * Warning triangle * First aid kit * Beacon warning light * Operating manual Conversion Technical Specifications: * Maximum speed: 85 km/h * Range: approx. 200 km * Battery: Lithium iron phosphate (LFP), nickel and cobalt free * Battery capacity: 80 kWh, 400 V / DC * Charging connector: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 Volt / 22 kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor output: 70 kW / Peak 92 kW * Torque: 410 Nm / Peak 730 Nm Technical Equipment: * Regenerative braking system * 22 kW onboard charger AC * DC/DC onboard power converter * Electric power steering * BMS - CAN-BUS controlled charging technology * Electric 5 kW HV cab heater * Color display showing all relevant battery, BMS, motor, and control data * Onboard diagnostic menu for motor and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Stainless steel construction elements * Battery heating system HV 400 Volt / DC (only in charging mode) * Vehicle approval according to § 13 EG-FGV / ECE R100 ORTEN City Rollup Superstructure Superstructure dimensions: Overall length: approx. 3,600 mm, floor slope: 0 mm Total height: approx. 2,360 mm, compartment width: front 2,057 / rear 1,320 mm Total width: approx. 2,200 mm, compartment height: 1,575 mm Aluminum roller shutter doors: Spring-assisted roll-up. Rubber strap for pulling down the roller doors. When closed, the doors are centrally secured by a locking handle mounted on both ends of the bulkhead and can be padlocked. Pallet stop: Pallet stops approx. 20 mm at the outside edge of each compartment, welded in place to prevent goods from sliding against the door Underride guard: Original chassis underride guard is used Rear wall: Fixed rear wall. Double-walled with smooth-faced aluminum paneling. Paintwork: Exterior of superstructure painted in RAL color tone. Lettering can be applied as specified at extra cost Side steps: Lateral underride protection formed by anti-slip access steps for the driver. Steps along the body on both sides of the vehicle, between the axles and behind the rear ...

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, ilk tescil: 08/2006, süspansiyon: hava, renk: turuncu, Üretim yılı: 2006, = Diğer seçenekler ve donanımlar = - Retarder = Notlar = Scania R440 Highline 4x2 - Retarder + Schmitz/Fliegl hayvan taşıma römorku - 2 katlı - Yük asansörü - Su & havalandırma sistemi - 2x yönlendirmeli dingil Model Yılı: 10-12-2013 & 30-8-2006 KM: 654.674 YS2R4X20002091493 & WFDFLT23561000630 Scania Euro 5 Opti Cruise otomatik şanzıman Retarder 2 katlı hayvan taşıma römorku Yük asansörü Su sistemi İklimlendirme sistemi 2x yönlendirmeli dingil = Daha fazla bilgi = Genel Bilgiler Kilometre: 654.674 km Kabin: Yataklı kabin Teknik Bilgiler Güç: 324 kW (440 PS) Azami toplam ağırlık: 35.000 kg Aktarma organı Yakıt tipi: Dizel Codpfx Aoy Dc I Eelderb Şanzıman Şanzıman: Opti Cruise, 12 ileri, otomatik Aks konfigürasyonu Süspansiyon: Havalı süspansiyon Arka aks 1: Maks. aks yükü: 10.000 kg; Yönlendirmeli Arka aks 2: Maks. aks yükü: 10.000 kg; Yönlendirmeli Fonksiyonel Araç üstü marka: Scania Çevre Emisyon standardı: Euro 5 Durum Teknik durumu: İyi Görsel durumu: İyi