Kullanılmış Müller-Mitteltal 2 Achs Tandem Stahl 3 Seitenkip. Mit Kombiklappe satın al (59.758)

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm Crodpfxex Nlkas Aldsb * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Crjdpfx Aloy Izvvsdjb

Koşul: ikinci el, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Crjdpfx Aloy Hh Icodob

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel Cedol Tnvgjpfx Aldsrb ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Koşul: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis Cjdpfxopk D I As Aldsrb ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (~300 mm) with 40 mm flanged towing eye * Jost manual landing gear at the front * Two manual folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Tie-down hooks at the positions of the central locking as well as 2 pieces at the front wall * Chassis made of fine-grained steel * Steel pallet-style three-way tipper body with reinforced Strong side panels (continuous side walls at the top with internal tube reinforcement – without mid-stakes – foldable with panel spring lifter) * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split – can be swung and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation, locking by zinc-coated rotary bolt closure at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with open wing door * Each corner equipped with one 5 t lashing point, each side with four 3 t lashing rings recessed in the outer frame * 4 mm floor plate made of fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load bearing capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment recessed under the loading platform at the rear in the chassis for ramps * Drawbar, underrun protection, rear stakes and rear folding supports hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Tyres: 358/55 R 19.5 * Side panels painted to customer’s RAL color specification (except special or metallic paint) – may be changed up to approx. 6 weeks before completion * Errors and prior sale excepted * Available from week 29/2026 * Sample images Codpfx Aex Hm Rcjldorb

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders Cjdpfx Alex Hm Riederb * Tire pressure monitoring with display capability in the truck via EBS signal - no truck-side installation required - * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem balancing unit * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter fenders * Net hooks at each lock location and 2 at the front wall * Chassis made of fine-grain steel * Steel pallet - three-way tipper body with reinforced strong side boards (continuous upper side walls with internal pipe reinforcement - without intermediate stanchions - foldable with board spring lifter * Screw-on rear stanchions * Combination steel swing door rear wall, 2-leaf, asymmetrically split, can be swung and locked up to 270° - not foldable - with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate function when tipping backwards with doors open * In each corner, 1 x 5 t lashing point and each side, 4 x 3 t lashing rings recessed in the outer frame * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed into the chassis below the loading area for ramp storage * Drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Side walls painted in customer-chosen RAL color (no special or metallic paints) – color can be changed up to approx. 6 weeks prior to completion * Subject to errors and prior sale * Available immediately from KW 29/2026 * Sample images

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Crsdpfx Ajyy I U Neldjb

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles Credpsl Th I Ajfx Aldjb * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight Crodpfol Th Nnjx Aldsb * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame Crjdpeykx I Hjfx Aldsb * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: Codpsykx I Tsfx Aldorb * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required Cedpfx Alotplwiodjrb * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function and return-to-ride (RtR) valve * Smart-board mounted on trailer as info tool (for axle load display – separately for front and rear) * Tyre pressure monitoring with in-cab display via EBS signal, no truck-side installation required * Side underrun protection * Swivel support legs at rear of chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized sheet metal skirts with spray protection * Reflective contour tape on sides and rear * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) mounted at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in turntable for accessories with folding lid, 2 container locks permanently installed (immediately after the turntable platform) * ROBOT-WELDED ANTI-SLIP coating to steel turntable platform (protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) front left & right on bulkhead carrier, 1 pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs each of UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3 m total width (not at rear taper) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm recess over rear axle, continuous up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in excavator arm recess, integrated in the side longitudinal frame Cedpfoxptn Rsx Aldjrb * 2 galvanized steps at turntable left + right * Profifix lashing rail in longitudinal axis, centered in level area, for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, towing bar painted in black tone * Loading height loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * 19.5" disc brakes * Automatic braking when opening the cross clamping units * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when uncoupling the brakes) * Tire pressure monitoring with in-cab display via EBS signal – no vehicle-side installation required * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right-hand side * Storage box for container net, made of galvanized perforated sheet, 1,000 x 500 x 500 mm, mounted on the side * Enclosed plastic mudguards, front and rear axles * Closed side underrun protection (RAL 9010 pure white) suitable as advertising surface * Rear underrun protection * Rear plastic impact protection buffers * Foldable A-board * Hazardous goods sign with document pouch and reflective rear parking warning panel * 15-pin electrical connector * LED lighting system with protective cover * 2 LED reversing lights (operated via reverse gear) * Additional front loading with lowered rear track and removable stop * Roller recesses at the turntable area with mechanically adjustable angle stops (2 positions), front left and right on the tracks * Track length approx. 6,830 mm * Pneumatic 4-point clamp locking system * For the transport of external roll containers according to DIN 30722 Part 1 – Dekra cargo securing certificate available * Loaded platform height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black finish * --Permissible gross weight technically possible: 20,000 kg-- * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale Codpfxel Tn U Rs Alderb * Available approx. from calendar week 21/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: Codpfx Aol Thyxolderb * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear Cedpfx Asl Thymeldjrb * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Koşul: yeni, azami yük ağırlığı: 8.500 kg, toplam ağırlık: 11.990 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Donanım: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 7 t Gigant axles * Parabolic springs with tandem compensating unit * Hot-dip galvanized drawbar, height-adjustable by approx. 300 mm, with 40 mm flange towing eye * Jost mechanical landing gear at front * Rear: 2 mechanical hot-dip galvanized folding supports * 15-pin electrical connector * Multi-chamber tail lights * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted right-hand side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet - three-way tipper body * Continuous side walls in white, top sections with internal tube reinforcements, drop-down without center stanchions, with sideboard spring lift * Drop-down and swinging tailgate with manual central locking * Screwed, hot-dip galvanized rear stanchions * Each corner fitted with one 5 t lashing point; each side with four 3 t lashing rings recessed into outer frame * 4 mm fine-grained steel floor plate * Net hooks * Rear mounting rail for loading ramps Credpfx Aloq Hg D Hsdob * Plug-in steel side extensions, 500 mm high, swinging on all three sides * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed into the chassis below the loading deck * Axles, springs, air reservoir and landing gear painted in black * Tyres: 285/70 R 19.5 * Side wall color: RAL 9010 pure white * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available ex works Egestorf (A7 motorway)

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * Two SAF axles * First axle as lift axle (fully automatic) * Lift axle ride height +30 mm via actuator cylinder * Start-assist for shunting purposes and forced lowering on first axle activated via speed-dependent EBS electronics (no installation required on the truck side, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load Cedpfx Aleyfy Rrsdjrb ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12/24V * 2 LED reversing spotlights switched with reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via rear lamp circuit ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Detachable pin towing coupling (use only with underrun protection retracted) * Enclosed plastic half-shell single fenders * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising space ----Hydraulics: * Twin-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial no. 100746129, year 2023) * Base frame made from high-tensile fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift controlled via remote control * Remote control with quick function for lowering, not for lifting * Emergency stop switches, left and right * Container supports with four pads per side and one roller at the rear on each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 mechanical drop-down supports at the rear * Rated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable the remote. The brake lines must remain connected to allow the hydraulically/pneumatically controlled valves to open. * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, and front landing leg painted in black * Palfinger hooklift painted in black/yellow ----Infos: * Errors and prior sale excepted * Vehicle is in very good / like-new condition ----Container: Dimensions: * Load length: 5,500 mm * Load width: 2,300 mm * Load height: 1,000 mm Infos: * Mountings for hook systems avail...

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x SAF axles, rated for high load * First axle configured as lift axle (fully automatic) * Lift axle travel height +30 mm via height-adjustment cylinder * Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flanged Eye: * 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control: 12+24 V via tail light circuit ----General Equipment: * BPW manual landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel guards * Double access step, front left of the bulkhead * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side * Enclosed side underrun protection, suitable for use as advertising space ----Hydraulics: * Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation) * Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame constructed from high-tensile fine-grained steel * 20,000 kg traction force * Hook height: 1,570 mm * Hooklift controls via radio remote * Quick function available for discharging, not for loading * Emergency stop button on both left and right sides * Container mounts: each side with 4 supports plus 1 rear roller each * Hydraulically operated rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at rear * Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves * Monitoring system ensuring underrun protection is retracted before tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized * Axles, air reservoirs, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Internal length: 5,500 mm * Internal width: 2,300 mm * Internal height: 1,000 mm Information: Cedpfxox Dp Amo Aldjrb * Mounting brackets for hook s

Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Crjdjtr Sucjpfx Aldob ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, 300 mm range, with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical support winch at the front * Rear: 2 mechanical folding supports * Plastic toolbox, approx. 750 x 350 x 300 mm, right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of high-strength fine-grain steel ----Tipping Body: * Net hooks on the sides and rear in the central locking mounts plus 2 pieces on the front wall * 2-way pallet steel tipper body, fixed front wall of smooth sheet, continuous drop sides (without center stanchions, fold-down with sideboard spring assist) and swinging via manual central locking * Rear stanchions bolted * Steel rear wall inserted in front of the ramps * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings each side, recessed in the outer frame * 4 mm fine-grain steel floor ----Ramps: * Two-part mechanical steel grid access ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (can be manually telescoped to 80 mm overlap) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Drop sides and platform painted RAL 9010 pure white * Side wall and tipping body paintwork in any RAL color available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 07/2026

Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: Codpfotr St Usx Aldsrb ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, toplam genişlik: 25.000 mm, toplam yükseklik: 40.000 mm, Üretim yılı: 2014, Donanım: ABS, Araç ile ilgili talepleriniz için Seidel Bey size memnuniyetle yardımcı olacaktır (telefon numarası isteğe bağlı). MÜLLER MITTELTAL SF32BM/BT Beton Mikser Yarı Römork Üst yapı: Liebherr HTM 1004 10m³, BPW akslar, tambur frenler, yaylı akümülatör, Wabco ABS, 1. aks kaldırılabilir, havalı süspansiyon, izin verilen toplam ağırlık: 32.000 kg, boş ağırlık: 6.510 kg, taşıma kapasitesi: 25.490 kg, lastik dişi: 1. aks 14-15 mm, 2. aks 10 mm Talebiniz halinde size leasing veya finansman teklifi sunabiliriz. Seidel Bey size memnuniyetle yardımcı olur (telefon numarası isteğe bağlı). Daha fazla bilgiyi internet sitemizde bulabilirsiniz. ... Hatalar, değişiklikler ve ara satışlar saklıdır!!! = Ek Bilgiler = Azami yüklü ağırlık: 32.000 kg Crsdpfx Aloyfu Sdjdob Daha fazla bilgi için Tobias Ebert ile iletişime geçin.

Koşul: ikinci el, boş ağırlık: 3.680 kg, azami yük ağırlığı: 10.720 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2021, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 156J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 156J, arka lastik boyutu: 385/55R19,5 156J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, YENİ GİBİ, geniş lastik, GALVANİZLİ damper kasası, 12 adet sabitleme halkası, 600 mm yan paneller, rampalar için ek ücret 1.000 €, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla veri için: !, Detaylı bilgi: ! Csdpfx Aljy E H Ryoderb

Koşul: ikinci el, azami yük ağırlığı: 16.950 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2006, bir sonraki muayene (TÜV): 04/2026, Üretim yılı: 2006, * Müller Mitteltal T3 NG * Low loader * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Errors excepted We offer: Net purchase for companies from the EU with a VAT ID, as well as customers from third (non-EU) countries. Crjdpfeyv Ug Dex Aldeb Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on the classifieds portal are gross prices and already include the statutory VAT of 19%.