Kullanılmış Fliegl Vts 400 S Luft/ Hydr. 4-Achs Tieflader Kröp satın al (61.843)

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame Bwedpfx Ajl Tnvgskisp * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm Bwedpoy Ngz Hefx Akiop * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: Bwodopk D I Aspfx Akiop * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Durum: yeni gibi (sergi parçası), boş ağırlık: 10.000 kg, azami yük ağırlığı: 30.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 4x2, yükleme alanı uzunluğu: 9.220 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, Üretim yılı: 2025, Donanım: ABS, merkez döner tabla, tır çekici bağlantısı, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible gross weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820–1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible gross weight (special version): 40,000 kg Payload (special version): approx. 30,000 kg Low-bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical gross weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low-bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high-bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low-bed Suspension: Air suspension unit including lifting and lowering, acting on the rear axle group Brake system: Brake system according to EC directives with EBS 4S/3M in multi-voltage version (12–24V), spring-loaded parking brake including 2 external test connections for brake/modulator and air bellows pressure Electrics: Lighting in LED version with flashing function for side marker lights, multi-voltage (12–24V) Turntable: Heavy-duty welded construction with low-maintenance ball bearing turntable Towing device: Cranked towing bar with 50 mm towing eye, low-maintenance silent bushings, including height adjustment for towing bar Frame: Heavy-duty welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (length at top approx. 2,500 mm, depth approx. 410 mm) and rear (length at top approx. 1,470 mm, depth approx. 370 mm); without wheel recess covers Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cutouts over the rear wheels with wheelbase 2,010 mm, front corners chamfered Rear climbing strips on the ramp slope for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame (high-bed) 1 pair of stake pockets (90x50 mm) in the outer frame (low-bed) Floor: 50 mm softwood floor (painted/impregnated) Ramps: Single-piece hot-dip galvanized drive-on ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable Direct-acting standing spring lifters for easiest operation Finishing: Chassis frame hot-dip galvanized by immersion Support: 2 folding supports at the rear, left and right at the vehicle rear Equipment: Folding side underrun protection Front: semicircular plastic mudguards Rear: straight steel mudguards with anti-spray 2 wheel chocks with holder Contour marking in accordance with ECE Regulation R48 Wheel recess covers front: With 3 pairs of stake pockets, without covering (covers retractable under the longitudinal members) 975.00888 Hardwood covering for front wheel recess cover Wheel recess cover rear Bodjiciutspfx Akiowp With 1 pair of stake pockets, without covering (cover retractable under the longitudinal members) 975.00897 Hardwood covering for rear wheel recess cover 3 pairs of 6 t lashing rings, bolted 3 m equipment package without slope, B=11,200 Folding extension arms with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning plates (4 pieces), electrics and revolving beacon 1 pair of stow

Durum: ikinci el, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2007, Donanım: ABS, Vehicle Identification Number: XL942N5SA7L007207 Fifth Wheel Load: 18,000 kg – Axle Loads: 4 x 10,000 kg Empty Weight: 11,020 kg German MOT (HU) due Gooseneck Length: 4,100 mm Coupling Height: 1,250 – 1,400 mm (King Pin 3.5") Lowbed: Length: 9,400 mm, including sliding table 500 mm (of which 600 mm is chamfered) – Width: 2,525 mm – Loading Height: 880 mm TELESCOPIC EXTENSION: up to 6,300 mm EXTENDABLE WIDTH: up to 3,000 mm Removable side rails Technical axle loads: 4 x 10,000 kg SAF axles with drum brakes Axles 3 and 4: self-steering Bjdpfoy T Aq Ejx Akiewp Large toolbox on gooseneck Central lubrication system Tyres: 245/70 R 17.5 Modifications, prior sale, and errors excepted. The above description is intended for general identification of the vehicle and does not constitute any warranty in the legal sense. The specification in the purchase contract is binding. Our offer is generally without a new TÜV inspection. Should you require a new TÜV approval, we would be happy to provide an offer from our partner workshops! The vehicle may be provided with advertising decals and/or labeling. Our general terms and conditions of delivery and payment apply.

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, * Uzatılabilir * Takip kontroll aksı * Hidrolik yükleme rampaları * Havalı süspansiyon -----Dahili araç numarası: 11555----Hatalar ve ara satış hakkı saklıdır WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca ulaşabilirsiniz. Bwedox I Uyhjpfx Akiop WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Durum: ikinci el, azami yük ağırlığı: 34.440 kg, toplam ağırlık: 46.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1999, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 46.500kg Boş ağırlık: 12.060kg Yük kapasitesi: 34.440kg Toplam uzunluk: 13.550mm - 26.550mm Genişlik: 2.550mm Diğer Bilgiler Bsdoycpbnopfx Akijwp - 3 aks hidrolik zorunlu yönlendirmeli - Üstsadel yönlendirme kıskacı - Rampa askı rayı - Yükleme alanı için takma çıtalar - 2 kat teleskopik, 26.550 mm’ye kadar uzatılabilir - Kuğu boynu üzerinde alet kutusu - E-Tekerlek - Elektrik ön hazırlığı - Hidrolik art yönlendirme fonksiyonu, elektronik uzaktan kumanda - Geniş bağlama paketi - Kendi hidrolik pompa ünitesi Diğer yeni ve ikinci el havuzlu yarı römorklar mevcuttur. Daha fazla bilgi için

Durum: yeni, güç: 294 kW (399,73 bg), yakıt türü: gaz, toplam ağırlık: 18.644 kg, dingil konfigürasyonu: 2 dingil, frenler: retarder, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 4.550 mm, yükleme alanı genişliği: 2.400 mm, Üretim yılı: 2023, Donanım: hidrolik arka platform, Whatsapp: _____ Iveco S-Way 400/Meiler/CNG/Natural Gas/Leaf-Air/AHK (Trailer Coupling) ? Manufacturer: IVECO ? Model: S-Way 400 ? New price from €210,000 ? Mileage: 669 km ? First registration: 06/2023 ? Output: 294 kW/399 hp ? Transmission: Automatic ? Body: Meiler three-way tipper ? Loading area: L: 4.55 m x W: 2.40 m ? CNG/Natural Gas ? Wheelbase: 3.80 m ? Retarder ? Air conditioning ? Cruise control ? Hill start assist ? Lane departure warning system ? Start assist ? Differential lock ? Hands-free system ? Tachograph ? Sunroof ? Seat heating ? Trailer coupling – Duo-matic and standard connections ? Trailer hydraulics ? Automatic lighting ? Heated side mirrors ? Xenon lights ? Euro 6 ? Curb weight: 9,350 kg ? Payload: 9,294 kg ? Permissible total weight: 18,644 kg ? German vehicle ? German documents ? Immediately ready for operation _____ You can also receive the description in another language by email. ? Our services: ? ? - Export declaration, customs clearance, yellow short-term plates, red customs plates ? - Purchase of your used construction machine or commercial vehicle ? - Assistance with financing ? - We offer you transport solutions ? - Viewing and demonstration of machines Mon–Fri 9:00–17:00 (Saturday by appointment only) ? ? Our range of machines changes continuously and is always up to date on our website ? ? ? We are also happy to assist you by phone. ? ? Sanisa GmbH ? Otto Hahn Straße 13 ? 35510 Butzbach ? ? Tel: ? Mobile: ? This offer is non-binding and subject to prior sale. - Subject to intermediate sale, Bjdpfezax Dgjx Akiewp - Errors and/or typographical mistakes excepted. - Sale in accordance with our terms and conditions.

Durum: ikinci el, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2021, toplam genişlik: 3.000 mm, toplam yükseklik: 3.760 mm, Donanım: ABS, * Own hydraulic unit * Hydraulically movable loading ramps * 4 hydraulic auxiliary supports * Hydraulically extendable low-bed (3000 mm) * Extendable loading platform (500 mm) * AXION radio system with remote control * Gooseneck with side walls & storage box * Hydraulically steered axles ----* Wabco Trailer EBS-E * SAF axles with drum brakes * Wabco SmartBoard unit Bsdpfozbw N Rsx Akijwp * Height-adjustable low-bed * Reversing camera * Telematics ----The following work was carried out by ES-GE Nutzfahrzeuge in February: * Brake drums, brake shoes & linings, brake cams, bushings & slack adjusters renewed on all 4 axles * Tie rod ends replaced * Suspension of the steering knuckles on TwinAxle II replaced * Electrical lighting system serviced * Hydraulic accumulator replaced * EBS repaired * Electric pump checked * High-pressure oil and filter replaced * Checked axle play * Central lubrication system checked * Suspension levers serviced * Sensors for height adjustment serviced * Distribution box at the front serviced * Wooden floor repaired * Protective covers repaired * Air reservoir newly fastened * Wheel bearings checked ----* Tire size: 245/70R17.5 * Gross vehicle weight: 73,000 kg * Unladen weight: 14,600 kg * Total length: 13,200 - 16,200 mm * Total width: 2,540 - 3,000 mm * Mileage: 194,000 km * Next SP inspection due: 09.2026 ----Vehicle number: 12154----Subject to errors and prior sale----Advertising and various lettering digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- YOUR VTS TEAM

Durum: ikinci el, boş ağırlık: 8.650 kg, azami yük ağırlığı: 31.350 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2012, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: çelik, lastik boyutu: 245 / 70 R 17,5, dingil mesafesi: 4.725 mm, renk: turuncu, vites türü: diğer, ön lastik ölçüsü: 245 / 70 R 17,5, arka lastik boyutu: 245 / 70 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Ana renk: turuncu Bwsdpfsyuu Ikox Akijp Donanım ekstraları: ABS, süspansiyon: yaprak yaylı, taşıma kapasitesi (kg): 31.350 Kasa tipi: Goldhofer 4 dingilli lowbed yarı römork T4-2x2-32/80, BPW ECO dingiller yaprak yaylı, genişletilebilir yanlar, yükleme alanı yaklaşık 7.000 x 2.550 mm, yükseklik yaklaşık 860 mm, arka mekanik destek, 2.850 x 700 mm hidrolik rampa, hidrolik yan kaydırma, 50 mm çekme gözlü çekici çatalı, Duomatik hava bağlantısı, elektrik 24 V - 2 x 7 kutuplu, ABS.

Durum: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0 ----Brake System: * EBS braking system * Emergency release for spring-actuated brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Removable beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: enclosed plastic mudguards; rear: straight galvanized steel mud flaps, each with splash guards * Tool box made of galvanized steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets per side (stakes not included), each with integrated lashing option ----Load securing (La-Si package comprises): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * 13.4 t at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear chamfer) * Widening planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp displacement ----Loading area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black ----Information: * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Bjdpfx Akel Th Nnjiewp Immediately available ex Egestorf

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 15.900 kg, azami yük ağırlığı: 42.100 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2001, yükleme alanı uzunluğu: 8.960 mm, yükleme alanı genişliği: 2.520 mm, toplam uzunluk: 12.950 mm, toplam genişlik: 2.520 mm, toplam yükseklik: 3.800 mm, süspansiyon: hidrolik, lastik boyutu: 245/70R17,5, dingil mesafesi: 1.360 mm, azami hız: 90 km/s, renk: mavi, römork freni: frenli römork, Üretim yılı: 2001, Donanım: ABS, Nooteboom MCO-73-04V Top trailer from first owner, first registration: 21.11.2001, Bwjdpfx Aoyqm I Uskisp Refurbished in 2014, Brakes renewed in 12/2025! 66,000 kg total train weight with 3-axle tractor, Gross weight: 58,000 kg, Fifth wheel load: 18,000 kg, Axles 1-4: 10,000/10,000/10,000/10,000 kg, Unladen weight: 15,900 kg, Exact dimensions can be found in the technical data sheet, Lowbed: 8.96 m + 5.50 m telescopic extension, Hydraulic supports front and rear allow lifting the trailer including 30 t load completely, e.g., for side ramp unloading, Hydraulic suspension (also allows leveling for uneven load distribution), 1st axle liftable, 4 steerable axles, either automatic or remote-controlled as desired (also countersteering possible), Hydraulic ramps + hydraulically extendable up to 3,000 mm, Loading platform extendable up to 3,000 mm, Tyres: 245/70R17.5 1A=6/6/6/6mm 2A=11/11/8/8mm 3A=9/9/7/7mm 4A=11/11/7/5mm, spare wheel 6mm, Further details on request. Sale only to businesses or for export. Leasing/financing available on request – immediate processing, also without down payment! More information and requirements on request. Vehicle description is for general identification only. All information, images, and descriptions are provided without guarantee! Equipment details should be verified separately if required. The seller assumes no liability for any errors in typing or data transmission. Subject to error and prior sale. Thank you very much for your interest! We look forward to your visit. Our SERVICE We will gladly consider your used vehicle as part exchange, 30-day export license plates incl. insurance, EUR-1 and all customs export documents, TÜV / SP / UVV / tachograph inspection / OBU installation, Professional delivery to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location possible by arrangement, Installation of additional components or other individual customer requests possible by arrangement.

Durum: ikinci el, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) Bedpfx Aji Ai E Rokiowp - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durum: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 11.940 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 235/75R17,5, renk: diğer, Üretim yılı: 2026, 4 dingilli alçak şasi treyler, sıcak daldırma galvanizli, 3000 mm'ye kadar genişletilebilir. 3000 mm uzunluğunda ve 750 mm genişliğinde çelik rampalar, hidrolik işletim ve hidrolik yan kaydırmalı. Kepçe kolu çanağı: 1800 mm uzunluğunda, yaklaşık 650 mm genişliğinde ve 150 mm derinliğinde. Yumuşak ağaç taban, 70 mm. Stok araç. Bwsdpfsyxft Tjx Akijp

Durum: ikinci el, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm. Vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and modifications. Sample images -- More data at: ! Bsdpfx Ajzhf Rnskiswp More details: !

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 5.100 kg, azami yük ağırlığı: 33.900 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, yükleme alanı uzunluğu: 9.325 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.750 mm, yükleme alanı hacmi: 40 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.230 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Özel Taşıma Çözümü Fliegl aracınızı taleplerinize göre yapılandırın. Görüntülenen araç bir örnektir. Üretim ve donanım müşterinin isteklerine göre bireysel olarak gerçekleşir. *Şasi Treyler Kipper* İnce taneli çelikten, kaynaklı yapı, Temel hafif yapı, Değiştirilebilir 2" kral pimi bulunan treyler plakası Kavisli ön panel "Patentli" 24 tonluk, 2 kademeli destek vinci, tek taraflı kullanım, yarım dairesel alt parçalı ve düz bağlantı plakalısı, yük dengeleyicili Teker takozları ve tutucu Yan çarpma koruması alüminyum Bwsdpfxszhgp So Akiop Alt koruma, katlanabilir Yarım kabuk çamurluklar Entegre "çamurluk tutucu", taşları geri püskürten yüzey Sadece son aks üzerinde antispray çamurluk 1 yedek lastik için tekerlek tutucu, jant sabitleme setli Yedek lastik, ana lastikle aynı marka, çelik jant Plastik alet kutusu, çekmeceli ve raflı, b=650 / y=520 / d=670 mm, asma kilit ile kilitlenebilir Branda çubuğu ve tutucusu Arka çekme kancası *Aksonlar ve Süspansiyon* 430 mm disk çapında disk fren aksları Off-road tipte akslar "Aks/şasi lazer ölçümü" - Lastik aşınması ve yakıt tüketiminde azalma Havalı süspansiyon 1. aks otomatik kaldırma aksı, zorunlu indirme ve kalkış desteği dahil, "3x frenle" devreye girer (Kalkış desteği, aks yükü %30 aşılana kadar ve max. 25 km/sa hıza kadar çalışır) "Sıcak daldırma galvanizli kaldırma aksı mekanizması" - Paslanmaya karşı 10 yıl garanti *Fren Sistemi* 2 hatlı basınçlı hava fren sistemi Kolay bakım için renk kodlu tesisat Yay depolu el freni Önde 2 karıştırılamaz bağlantı başlığı Elektronik fren sistemi EBS, ön tarafta EBS soketi Kaldırma ve indirme valfi ile Araç denge kontrol sistemi Otomatik devrilme alçaltması, kesme vanalı *Tekerlekler ve Lastikler* 385/65 R22.5" çelik jant, fabrika gümüşü *Elektrik* 24 Volt, çok odacıklı LED arka stop lambaları, yanlarda sarı LED aydınlatma, LED plaka aydınlatması (Not: bazı çekici araçlarda fonksiyon doğru olsa da arıza uyarısı çıkabilir) 2 adet önde beyaz pozisyon lambası LED 2 adet arkada beyaz/kırmızı hat lambası LED Önde 2 x 7 pin ve 1 x 15 pin karıştırılamaz soket, bağlantı kablosuz Ekstra LED çalışma lambaları arka kısımda gömme *Hidrolik* Düşük basınçlı silindir max. 170 bar, en küçük kademe sert krom kaplama, HDK vidalı soketli sabit parça, NW 48 mm Kamyona bağlı yan tahrik ile hidrolik kumanda Hidrolik bağlantı hortumu ve HDK vidalı bağlantı (NW = 48 mm), tırtıllı somunlu *Damlalar* Yüksek kaliteli, aşınmaya dayanıklı alüminyum kasa damper Eğimli ön panel 5 mm kalınlığında, dıştan silindir bağlantısı Yan paneller 30 mm boşluk profilli, düzgün kaynaklı, dökme malzeme tutmayan üst profil. İçte ön bölümde tırmanma Kürek ve fırça tutucu ön dış duvarda Greenline - konik ve aerodinamik damper şekli "Membran" tip arka kapak Arka kapak - Çift menteşeli sarkaç kapak, dışta, çift kancalı kilitleme Arka kapak lastik conta Orta taneli kapak Taban 6 mm kalınlıkta, yekpare Yükselme platformu ve tırmanma, hava/elektrik ve fren bağlantısı için geniş ulaşım alanı Yan doğru sağa katlanan tek taraflı rulo branda

Durum: ikinci el, azami yük ağırlığı: 28.560 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 12.032 mm, yükleme alanı genişliği: 2.352 mm, yükleme alanı yüksekliği: 2.698 mm, yükleme alanı hacmi: 68 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, FLIEGL 3-Axle Fixed Container Chassis with High-Cube 40 FT Container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis tare weight: 3,640 kg High-Cube container tare weight: 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with traction aid Equipped with vehicle driving stability system Axle load detection 6x 385/55 R 22.5 tyres 40 FT high-cube container with the right side wall designed as doors (multi-wing), door dimensions L 2,340 x W 2,585 mm Bwsdpfx Aksvzk Naeijp Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 cbm Fits 25 Euro pallets Accessible with pallet truck and forklift Condition: A1 RENTING is the new BUYING – also available from us as full-service rental.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34202036640, boş ağırlık: 6.213 kg, azami yük ağırlığı: 35.787 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2025, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.310 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: sarı, The images are archive photos; the vehicle may still be in use! Fifth Wheel Height approx.: 1200 mm Chassis - Tipper Semi-Trailer Basic lightweight design, fifth wheel plate with replaceable 2" kingpin, patented curved front section. Foldable underrun protection with spring assistance for easier operation. Integrated mudguard bracket with stone-repellent surface. Axles & Suspension SAF disc brake axles with 430 mm disc diameter. Axles/chassis laser measured, reducing tire wear and fuel consumption. Air suspension. First axle is a self-lifting axle with forced lowering and starting aid, activated by pressing the brake three times (starting aid operational with axle overload up to 30% and max. 25 km/h). Braking System 24 Volt EBS electronic braking system with front EBS socket (without connecting cable), external test port for brake cylinder pressure at EBS module, with lift & lower valve. Paver brake, electric control from the truck without truck installation. Automatic tipper lowering with shut-off valve. TPMS (Tire Pressure Monitoring System) according to ECE R 141, display in tractor unit via EBS (truck must be pre-equipped, only monitors standard tires). Axle load detection via EBS CAN-bus signal, display in cab (truck must be pre-equipped, no installation required). Wheels and Tires 385/65 R22.5 steel rims Electrics Side yellow LED lights linked to indicators (flashing side marker lights). Two front white position lights in LED, two rear white/red lane marker lights in LED. Side-mounted LED work lamps on both sides, two additional LED work lights recessed in rear section. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Operation hydraulically via truck PTO. Bodies Steel round body with "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior access at the front wall. Greenline – conical and aerodynamic body shape. "Membrane" tailgate – hydraulic rear flap with large upward opening, approx. 2200 mm clearance height. Side walls continuous 5 mm thick; floor continuous 8 mm thick. Insulated body version – Fliegl Asphalt Profi Thermo, front, side, bottom, and rear insulated with Fliegl Isotherm. "Flip Top sliding cover" with automatic rear closure (folding framework). Cover is pre-assembled forward, electrically operated with 7-pin plug at front (charging socket) without connecting cable, no truck installation. Operable on the trailer and via remote control. Bodpfoyylapsx Akijwp Operating Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible but may not be achievable depending on cargo while observing legal axle, support, and fifth-wheel loads (poor driving and tracking may occur due to incorrect weight distribution). Paintwork Frame – DB 7350 Nova Grey "10 years corrosion warranty" Support legs – Black coated Body – RAL 1007 Narcissus Yellow Tarpaulin – RAL 7038 Agate Grey

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34202038273, boş ağırlık: 5.680 kg, azami yük ağırlığı: 29.320 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.680 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", lastik durumu: 100 yüzde, renk: gümüş, Chassis Semi-Trailer Forwarding Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with replaceable 2" kingpin Outer frame in low loader design: 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 10 pairs of combination stake pockets with ring lashing eyes (bolted), each rated for 5 t, embedded in the outer frame, approx. 72 x 42 mm internal dimensions Outer frame with 'Load-Lock Profile' for lashing strap hooks, with holes approx. every 400 mm 24 t, two-speed landing gear, single-side operation Free swing radius to landing leg approx. 2500 mm, landing leg spacing approx. 2600 mm Telescopic ladder at the rear 2 wheel chocks with holder Side impact protection, aluminium Underrun protection, galvanized steel Rear mud flaps across full width Quarter shell fenders before and after axle assembly with anti-spray mud flaps only on last axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable in front of axles 1x on driver's side and 1x on passenger side 1 storage box, full width, closed, underneath the loading deck, approx. w=450 mm / h=400 mm / d=2460 mm mounted directly in front of axles 3 lashing/stake rails with 4 pairs of locking slots, installed crosswise in the floor over the full width up to the outer frame (max. usable internal width between the outer removable stakes approx. 1782 mm), approx. 80 mm high. With cut-outs on top and bottom for lashing and inserting stakes 80 x 80 mm. Bottom partially open downwards with angle bracket as stop. Combined design for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container locking adapters 10 combination removable stakes with cut-out at the bottom W=80/D=50/L=1200 mm 6 removable stakes W=80/D=80/L=1200 mm, hot-dip galvanized Axles + Suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle automatic lift axle, additionally electric control from the truck, including forced lowering and start-up aid Brake system 2-line compressed air braking system Spring-loaded parking brake 2 foolproof coupling heads at the front 24 Volt EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! with Raise & Lower valve + auto-reset function Bedpfx Aozbbpujkijwp Vehicle stability control system Axle load detection via EBS CAN-bus signal, display in driver’s cab Wheels and Tyres 385/65 R22.5" Steel rims 'RDKS' Tyre Pressure Monitoring System in accordance with ECE R 141, display in towing vehicle, via EBS Electrics 24 Volt, multi-chamber lights, side yellow LED lighting side yellow LED lighting linked to indicator "Flashing side marker lights" 2 white LED position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front 2 additional LED work lights at the rear 1 LED beacon with bracket 2 pairs of LED warning signs illuminated and extendable up to 3,000mm 2 additional LED work lights on top of the front bulkhead additional 7-pin socket in the rear underrun protection Floor Anti-slip phenolic plywood panels approx. 30 mm thick, high point-load capacity for forklift axle loads up to max. 7,900 kg 'Premium floor sealing' throughout, floor all-round jointed Front Bulkhead / Corner Posts 25 mm aluminium hollow section, 1,350 mm high, steel corner posts in volume version Front bulkhead additionally lined inside with 1,250 mm high phenolic plywood panel 'Crash-blocker', steel i

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, From ongoing production Total weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: 8,670mm total, 2,520mm gooseneck, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information: - Steel welded construction - Turntable with robust slewing ring - Folding rear support - Chocks with holder - Aluminium side underrun protection - Full-width rear mudflap (not in combination with forklift bracket) - Half-shell mudguards on 1st axle with anti-spray mudflaps - Anti-spray mudflaps behind 2nd and 3rd axles - Plastic toolbox - Extendable width to 3,000mm - Central storage compartment for wooden planks on the loading area - 70mm wooden planks for extension to 3,000mm - Lashing eyes low bed - 1 pair of lashing cutouts recessed in the front longitudinal beam on the gooseneck, each rated at 10 tons - 4 pairs of lashing holes in the external frame of the gooseneck, each rated at 5 tons (for attaching lashing straps) - 7 pairs of lashing mushrooms inserted on top and side of the external frame, each rated at 10 tons - 1x on the gooseneck, 6x in the low bed - Pair of ring lashing eyes recessed in the external frame, each rated at 5 tons (convertible to stake pockets) - Additional pair of folding lashing eyes, each rated at 10 tons - 1x on the gooseneck - 1x recessed in the floor behind the last axle Towing device/trailer turntable: - Drawbar with certified 40mm eye - Drawbar height adjustable by spring Axles & suspension: - Drum brake axles, manufacturer’s choice - "Laser-measured axles/chassis": reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels & tyres: Bwsdpfeuytx Ssx Akijp - 235/75 R 17.5'' - Manufacturer’s choice - Twin steel rims, factory silver Braking system: - Two-line air braking system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at the front, with connecting lines to towing vehicle - 24V ABS and ALB, with ABS plug at the front, incl. cable Electrics: - 24V, multi-chamber lights, yellow LED side lighting - 2 white position lights at the front - 2 white/red clearance marker lights at the rear - 2x 7-pin non-interchangeable plugs at the front, with cable - LED beacon with bracket, operated via parking lights (removable beacon) - Pair of warning boards double LED-lit and extendable to 3,000mm Floor: - Gooseneck front with steel / checker plate covering - Storage compartment recessed in the transition slope to the gooseneck - Then approx. 70mm softwood floor, with steel/checker plate covering in wheel arch areas - Rear bevel with 70mm softwood floor - Low bed area including rear bevel 6,500mm Access ramps: - Steel ramps, 2,800mm long, 750mm wide, laterally adjustable - Additional ramp securing, foldable below (prevents lateral shifting of the ramps; not compatible with hydraulic ramp shifting) - Wood covered (tip portion with steel/checker plate) - Hydraulic via tractor PTO with throttle, operation at left front side - Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Painting: - Frame hot-dip galvanized incl. passivation - Ramps hot-dip galvanized Plus delivery/preparation from stockyard 26639 Wiesmoor: €1,280.00 net

Durum: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Chassis: low-bed trailer Steel welded construction Turntable with robust ball bearing race Bsdowlmr Dopfx Akiowp Foldable rear supports Wheel chocks with holder Full-width rear mudflaps 1 plastic toolbox Prepared for extensions to 3,000mm (holes in outer frame with covers, not in the rear taper) Tie-down eyes for low-bed 1 pair of lashing slots embedded in the front longitudinal member with cranking, each 10t 7 pairs of lashing pins, recessed in the top and sides of the outer frame, each 10t 1x at the front in the cranked area 5x in the low-bed 1x in the rear taper 12 pairs of lashing holes in the outer frame, each 5t (for tie-down straps) 5x cranked area, 6x low-bed, 1x rear taper Drawbar configuration – turntable trailer Drawbar with tested 40mm towing eye Drawbar height adjustable via spring Axles & suspension Drum brake axles (manufacturer’s choice) "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker balance) Wheels and tires 235/75 R 17.5" Manufacturer’s choice Steel rims, twin configuration, factory silver Braking system 2-line air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle Connection lines extended by approx. 60cm Without ABS, but with mechanical load-sensing valve; maximum approval for 60km/h Electrics 12 Volt, multi-chamber taillights, no side yellow LED lighting, side reflectors 2 white position lights at front 2 white/red lane marker lights at rear 1x 7-pin 12V plug at front, with connection cable extended by approx. 60cm 1 LED beacon with holder, switched via parking lights (removable lamp) 2 pairs of warning boards, double, LED illuminated and extendable to 3,000mm Floor Cranked front area with steel/tread plate covering Storage box recessed in the drive-over slope towards the cranked section Then 70mm softwood floor, with steel/tread plate covering in wheel arch areas Rear taper with 70mm softwood floor Low-bed loading area incl. rear taper: 5,900mm Ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Wood-covered (tip area with steel/tread plate) Hydraulically operated, via tractor auxiliary drive with restrictor, controlled from left front side Hydraulic connection with SVK coupling NW 10/3, incl. connecting hose Operating instructions For axle loads of 10,000kg, a special permit is required; only indivisible loads permitted! The specified total weight is technically possible, but depending on the cargo, the admissible total weight may not be achieved while observing permissible axle, support, and saddle loads (poor driving or tracking may result from incorrect load distribution). Country of registration / registration plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle LoF (With Swiss registration, max. 40 km/h approval possible) Prepared for two-line license plate holder No contour marking / reflective strips according to ECE R 048 Paintwork Frame: RAL 7021 black grey "10-year anti-corrosion warranty" Drawbar: galvanized Ramps: hot-dip galvanize

Durum: yeni, azami yük ağırlığı: 13.200 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.550 mm, Gross weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Overall length: 9,450mm Loading length: 7,500mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: - Frame painted in stock colour Nova grey - 70 mm wooden floor - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring assist - Folding rear support - Aluminium side underrun protection - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of flush-mounted ring lashing eyes in the outer frame (can be converted to stake pockets), each rated to 5t, 7 pairs of lashing mushrooms flush-mounted at the top and side of the outer frame, each rated to 10t - 50mm towing eye - Air suspension - Lift & lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at the front - LED beacon - 2 pairs of warning boards, double LED illuminated, extendable to 3m Plus delivery/hand-over ex stock location 26639 Wiesmoor €1,280.00 net Bwodpfx Aor Da Uvjkiop

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm, gooseneck 2,170mm, loading deck 6,500mm Width: 2,520mm Loading height: 860mm Additional information plus pre-carriage / delivery ex-stock 26639 Wiesmoor €1,280.00 net Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball race Rear supports foldable 2 wheel chocks with holders Aluminium side impact protection Full-width rear spray flap (not in conjunction with forklift bracket) Quarter shell mudguards in front of 1st axle Anti-spray mud flaps behind 2nd and 3rd axle 1 lockable plastic toolbox, w=600mm / h=425mm / d=460mm Extendable outriggers for widening to 3,000mm (not in rear bevel) (Track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550mm) Timber storage compartment centrally located on the loading area 70mm timber planks for extension to 3,000mm Lashing eyes low loader 1 pair of front lashing recesses in main beam at gooseneck, each 10t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5t (for attaching ratchet straps) 7 pairs of lashing points (studs) inset at top and side of outer frame, each 10t 1x at front on gooseneck 6x in well deck First lashing eye 250mm from front, last max. 250mm from rear, distance between lashing eyes max. 1,100mm 5 pairs of recessed ring lashing eyes in outer frame, each 5t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10t 1x on gooseneck (protruding) 1x recessed in floor behind last axle Towing gear Turntable trailer Drawbar with certified 40mm towing eye Drawbar height adjustment by spring Axles and suspension Bwsdpswlmr Rjfx Akiop BPW drum braked axles "Chassis/axle alignment with laser" to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (walking beam equalizer) Wheels and tyres 235/75 R 17.5" Manufacturer's choice Steel rims twin configuration, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 fail-safe couplings at front, connection lines to tractor unit 24V ABS and ALB, ABS socket at front, with connection cable Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin fail-safe plugs at front, with connecting cable 1 LED beacon with bracket, controlled via sidelights (beacon removable) 2 pairs of warning panels, each LED illuminated and extendable to 3,000mm Floor Gooseneck clad with steel/chequer plate Storage box inset in transition to gooseneck Subsequent area fitted with approx. 70mm softwood floor, in wheel arch areas with steel/chequer plate Rear incline with 70mm softwood flooring Lowbed area incl. rear incline 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Additional lower ramp locks folding (to prevent lateral slipping of ramps, not in conjunction with hydraulic side ramp shift) Planked with timber (ends with steel/chequer plates) With spring assist Operating instructions For a 10,000kg axle load, a special permit is required, only indivisible loads permitted! For application of a sp...

Durum: ikinci el, boş ağırlık: 9.500 kg, azami yük ağırlığı: 30.500 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2018, bir sonraki muayene (TÜV): 02/2027, süspansiyon: hava, lastik boyutu: 235/75R17,5140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5140J, arka lastik boyutu: 235/75R17,5140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Basamak cepleri, sabitleme halkaları, -- baskı hataları, değişiklik ve yanlışlık hakkı saklıdır, örnek görseller --, Daha fazla veri için: !, Daha fazla detay: ! Bsdpfx Akozif H Sjiowp

Durum: ikinci el, boş ağırlık: 8.680 kg, azami yük ağırlığı: 31.320 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2018, süspansiyon: diğer, lastik boyutu: 235/75R17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5, arka lastik boyutu: 235/75R17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Kasnak halkaları, ABS, uyarı levhalı genişletme, araç talep üzerine satılmaktadır., -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek resimler --, Daha fazla veri için: !, More Details: ! Bwodpfx Aszhr I Hjkiop