Kullanılmış Dede Tieflader Mit Auffahrampe Nutzlast 1.450Kg satın al (8.370)

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader? Drive-Over Flatbed Trailer Enquiry Reference: 11630. Vehicle available immediately from Alsdorf stock ?BRAND NEW VEHICLE incl. COC * Gross weight: 21 t, payload: 16.50 t, galvanized chassis * Flatbed design with 400 mm high front wall, ramp locking via ramp support bars and diagonal bracing * 21 t gross weight version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unladen * 7 m loading platform with 400 mm high front wall * Extended ramps: 3 m single-piece, hot-dip galvanized steel ramps with galvanized grating * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * Load securing package: Bodoyvxg Uepfx Ah Sodb * 4 UVV drop-forged lashing shackles (LC 8,000 daN) fitted to the existing hole pattern in the 45° outer frame; positioned approx. 1 m from front/rear cross member * 10 UVV lashing shackles LC 3,000 daN, retractable into the existing hole matrix in the outer frame * 2 UVV lashing rings each at front + rear, recessed in the cross member, LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and rear end cross members * Device for retrofitting container locks (container locks available and possible at extra cost) * 50 mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, raise and lower function * 235/75R 17.5 (8x) twin tyres with tyre pressure monitoring sensor * Plastic toolbox in front of the bulkhead on the right, in the direction of travel * LED lighting system * 7-pin socket at rear, pre-wired for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at rear * Side marker lights with flashing function * Warning panel for oversize loads * 1 removable round LED beacon incl. bracket and installation * Rear folding supports, front support leg with geared crank * ---- Lease-purchase example from our partner MMV Leasing: ¤ 665/month net, 60 months term, no down payment and "0" Euro final value Other terms with/without down payment/residual value possible! We are an official MüllerMitteltal dealer ----* Opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment * We speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * WhatsApp

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2017, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 6.250 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Ek bilgiler 400 mm aşağıya katlanabilir yan paneller - Yan panel yaylı kaldırıcı - Sökülüp takılabilir arka panel Bdjdpjy Hn D Rofx Ah Seb - Büyük bağlama paketi - Yükleme alanı delikli ray - Ön yükseklik ayarlı destek ayağı - Arka katlanabilir destek ayakları - Plastik alet kutusu - BPW dingiller - Yaylı ızgara rampalar

Koşul: ikinci el, kilometre: 1.093 km, güç: 129 kW (175,39 bg), ilk tescil: 06/2024, yakıt türü: dizel, toplam ağırlık: 7.490 kg, bir sonraki muayene (TÜV): 05/2028, renk: beyaz, vites türü: mekanik, koltuk sayısı: 3, yükleme alanı uzunluğu: 6.100 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 2.550 mm, Donanım: ABS, elektronik denge programı (ESP), hidrolik arka platform, klima, merkezi kilitleme, Internal vehicle number: 153331 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postcode 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior Bsdoy E Elpjpfx Ah Sodb * Heated rear-view mirrors Interior * Driver comfort suspension seat with horizontal suspension * Automatic climate control Safety * Driver airbag Comfort and Environment * Reversing warning system * Lane keeping assist Multimedia * Radio with Bluetooth and hands-free system Other features * 3-year manufacturer's warranty from first registration up to 100,000 KM * 3D roof spoiler * AdBlue tank cover * Double battery cover * Spare wheel holder, double secured * Euro 6 OBD Step E * Box body approx. 6,100 x 2,540 x 2,550 mm * Tail lift 1,000 kg * LED front headlights * Hire purchase/financing or leasing available through Daimler Truck Financial Service Deutschland (DTFSD). We would be happy to prepare an offer for you. * Payload 2,950 KG * Fuso safety package including floor mats * Sideguard Assist (turn assistant) * Extended mirror arms, long design incl. wide-angle mirror * Day registration to Daimler Truck AG * Valve extensions * Preparation for 12V battery isolator relay * Permissible braked towing capacity 3,500 kg Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: Optionally available with 12 or 24 months Mercedes-Benz used vehicle warranty. * We are happy to take back your current vehicle, offset it against the new one or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We would be happy to prepare an offer for you. * No liability for printing and typographical errors * Subject to changes and prior sale ----.

Koşul: ikinci el, kilometre: 290.000 km, güç: 107 kW (145,48 bg), yakıt türü: dizel, vites türü: mekanik, toplam ağırlık: 7.490 kg, ilk tescil: 06/2008, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.200 mm, emisyon sınıfı: Euro 4, renk: beyaz, koltuk sayısı: 3, Üretim yılı: 2008, Donanım: ABS, is filtrasyon filtresi, kaza yaptı, klima, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, Chat now via WhatsApp: Engine damage!!! Probably cylinder head gasket, partially disassembled. Internal ID number: [626] ---- --- Vehicle Highlights: 19% VAT deductible * German vehicle * Full service history * German registration * New engine fitted 35,000 km ago with documentation (cost €11,000) * New tyres * New brakes Bsdpfx Ahexffuus Ssdb * New XXL sleeper cab for 2 people * Air conditioning * Tow hitch on load platform * Webasto auxiliary heater * Dragon winch with 9-ton pulling capacity, including remote control * Aluminium platform, long version * Cruise control * Heated seats * Lateral storage boxes * And much more... * Gross vehicle weight = 7,490 kg * Payload = 3,800 kg --- Looking for leasing or financing? We offer attractive deals – also available with zero down payment! Please contact us for details. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH, Rudolf-Diesel-Str. 2, 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00–18:00, Sat: 9:00–14:00 --- Disclaimer: All information provided online is non-binding and serves solely as a general description of the vehicle. Errors, typographical mistakes, and prior sale excepted. The binding condition of the vehicle is defined exclusively by the purchase agreement on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our business customers.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Bedpfxjxt Rw Rj Ah Ssdb Daha fazla bilgi için lütfen bizimle iletişime geçin.

Koşul: yeni, kilometre: 30 km, güç: 129 kW (175,39 bg), yakıt türü: dizel, toplam ağırlık: 7.490 kg, vites türü: mekanik, koltuk sayısı: 3, yükleme alanı uzunluğu: 3.400 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, merkezi kilitleme, * MEILLER Trigenius 3-yönlü motorhidrolik damper * Yaklaşık boyutlar: 3400 x 2000 x 500 mm * Güçlendirilmiş 4 mm taban * Çok fonksiyonlu ön panel yükseltmesi * Saplı aletler için tutucu * Sürücü kabini ile damper kasası arasında ekipman kutusu * Geri görüş kamerası Bsdpfx Aeyfznlsh Sjdb * Yanda plastik alet kutusu * Bilyalı çeki demiri * Römork çekme kapasitesi 3500 kg * Arka aks diferansiyel kilidi * Otomatik klima * Sürücü hava yastığı * Arka aksda çekiş lastikleri * Teslimat karşılıklı görüşmeye bağlı olarak mümkündür! * Talep üzerine, uzun vadeli opsiyonlarla birlikte finansman teklifi sunabiliriz! * Diğer sorularınız için Bay Willi Schmidt size memnuniyetle yardımcı olacaktır!

Koşul: ikinci el, boş ağırlık: 9.300 kg, azami yük ağırlığı: 14.700 kg, ilk tescil: 02/2001, bir sonraki muayene (TÜV): 10/2024, toplam genişlik: 25.500 mm, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17.5 / 10mm, ön lastik ölçüsü: 235 / 75 R 17.5 / 10mm, işletme ağırlığı: 24.000 kg,

Koşul: ikinci el, azami yük ağırlığı: 39.500 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2010, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 9.345 mm, Üretim yılı: 2010, Müller Mitteltal T50 Compact Low Loader Ramps Tires: see pictures 5 axles Gigant axles Permissible total weight: 50,000 kg Unladen weight: 10,500 kg Payload: 39,500 kg Air suspension Immediately available Errors excepted We offer: Net purchase for EU companies with VAT ID as well as customers from third countries. Leasing and financing options available. Full handling of all customs formalities. Issuance of temporary and export license plates. Bedpfsyzlyxox Ah Ssdb Transport to the port. All prices listed on classifieds are gross prices and already include the statutory VAT of 19%.

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lift and lower function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display option on truck display via EBS signal (no installation required on truck side) * SmartBoard infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning board packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel approx. 650 x 300 x 600 mm, mounted on the right side * Front closed single plastic mudguards * Rear straight steel mudguards, each with spray suppression * Side underrun protection ----Low Loader Platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable lids * Floor on the turntable platform made of 50 mm softwood, and on the low-bed platform of 60 mm softwood * 20 mm rubber mat instead of wooden flooring in the running area with a low-bed length of 6,780 mm including the drive-up slope * Rubber mat on the drive-up slope left and right, approx. 860 mm long * Each side with 4 stake pockets (no stakes supplied), simultaneously offering 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lasi Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes on the perimeter frame of the turntable platform Low-bed Area: * Each side with 4 pairs of 10-ton lashing rings on the perimeter frame, retractable and loadable in all directions * Each side at the rear with 2 pairs of 13.4-ton swiveling lashing rings Bodpfxeylfvme Ah Sjdb ----Ramps: * Rubber coating on the foldable drive-on ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger beams for a total width of 3 meters (not in the rear slope) * Widening planks stored on the left side in a compartment ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end of the drive-up slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4-ton lashing rings on the sides of the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (including 860 mm drive-up slope) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading Height: * Loaded: approx. 890 mm, +/- 20 mm ----Paint/Finish: * Reflective contour tape on sides and rear * Chassis, turntable, drive-on ramps, and folding beams hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain optional equipment ----Delivery Time: * Vehicle available approx. from week 23/2026

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: Bdsdsylfvgspfx Ah Ssb * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3-in-1 = suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles Bjdpfx Ahol Thwce Sodb ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, length 2,100 mm * 40 mm drawbar eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), indication available in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Toolbox made of powder-coated steel sheet, mounted right-hand side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet metal, approx. 960 x 300 x 400/450 mm, right-hand side * Rear plastic impact protection buffer * Mechanical drop-down rear supports ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with rolling recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm are possible * Pneumatic 4-point clamping lock and mechanical plug-in front stops in the rail, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 movable skip stoppers for lateral centering of the skips, the front 4 stoppers are removable and feature pivotable stops * Weld bead as anti-slip coating in the ramp approach area ----Load Securing: * 3 pairs of 10 t UVV rated lashing rings on the sides for attaching tensioning devices for positive and friction-locked securing of skips * 4 lashing brackets in cloverleaf design (per side) * 1 pair of 13.4 t UVV rated lashing rings at the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Additional Information: * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Technically permissible gross weight of 20,000 kg * New vehicle with manufacturer’s warranty * Errors and subject to prior sale ----Delivery time: * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, * TRA-Kombi 18.0: * 3 in 1 = Suitable for hooklift containers, skip loaders, and as a low loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electric plug * RDÜ (Tire Pressure Monitoring) with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated steel sheet, mounted on the right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bump stops * Mechanical rear drop supports ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For hooklift container transport, container lengths of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical plug-in stop brackets at the front in the rail, load securing certificate to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops with oscillating stops * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of skips * 4 lashing cleats in cloverleaf design (on the side) * 1 pair of 13.4 t UVV lashing rings towards the front ----Ramps: Bedpfx Ahel Thv Rj Sjdb * 1 pair of aluminium approach ramps (10.6 t per pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Information: * Load securing certificates as per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight up to 20,000 kg (technically possible) * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each Bjdpfxjl Tihus Ah Sjdb * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) Bdodpfx Ajxptn Deh Ssb ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: ikinci el, azami yük ağırlığı: 16.950 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2006, bir sonraki muayene (TÜV): 04/2026, Üretim yılı: 2006, * Müller Mitteltal T3 NG * Low loader * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Errors excepted Bodpfxoyv Ug Ds Ah Sedb We offer: Net purchase for companies from the EU with a VAT ID, as well as customers from third (non-EU) countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on the classifieds portal are gross prices and already include the statutory VAT of 19%.

Koşul: yeni, azami yük ağırlığı: 8.770 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * BRAND NEW VEHICLE, no first registration * Available mid/end of May '26 in RAL 7016 Anthracite Inquiry no.: 30504 * Gross weight: 11.9 t, Payload: 8.77 t * Reinforced and certified bodywork according to EN 12642 XL incl. load securing certificate * 6.27m x 2.47m x 0.4m laser-welded steel drop sides, foldable with 2 spring balancers * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized) placed in front of the ramps with a storage bracket behind the front wall * Rear stakes bolted (hot-dip galvanized) * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN recessed front and rear in the cross member * 10 UVV lashing brackets LC 3000daN recessed in the perforated pattern in the outer frame * Ramps: one-piece with hot-dip galvanized grating, anti-slip design Bsdpfx Aoyxbdboh Sodb * Preparation in front of the front wall for retrofitting container locks * Plastic toolbox in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 wheels), parabolic springs * BPW axles with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing spotlights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * 1 removable LED rotating beacon (warning light) incl. bracket and installation ---- * Trade-in possible * Financing through our partners, with or without down payment or balloon payment, various terms available. Request an offer! ---- * Example hire purchase with our partner FM LeasingPartner: €475/month net for 60 months, no down payment, zero balloon. Other terms with/without down payment or final payment available. Request an offer! We are an official MüllerMitteltal dealer! ---- * Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside of office hours available by appointment * We speak German, English, Russian, Polish, and French.

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) Bdsdpfel Th I Aox Ah Ssb * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm Bedpfx Aol Th Nnsh Sedb * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: ikinci el, azami yük ağırlığı: 30.700 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2002, Donanım: ABS, * MüllerMitteltal alçak şasi 4 dingilli T40 * 2X yönlendirilebilir döner tabla aksı * Alman römorku * Direk Bdjdpfx Asyuri Eeh Sjb * Hidrolik olarak yana kaydırılabilen rampalar (sol-sağ) * Katlanabilir, bölünmüş rampalar * Genişletilebilir * ABS * BPW akslar * 40 ton * Boş ağırlık: 9.300 kg * Dingil başına yük kapasitesi: 10 ton * Tam çalışır durumda * Lastikler iyi durumda

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: 3 in 1 = for roll-off containers, skip containers, and use as low loader ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-type cylinders * Drum brakes ----Axles: * 2 × 10.5 t axles ----Suspension: * Air suspension with manual lowering at rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), indication in the truck via EBS signal (without truck-side installation) * LED tail lights 12/24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier in basket design on the right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact buffers * Folding A-plate at rear ----Loading area: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * Transport of roll-off containers with container length from 5,500 mm to 7,000 mm possible * Pneumatic 4-way clamp locking and mechanical plug-in stop angles at the front of the guide rails * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 relocatable skip stops for lateral centring, front 4 skip stops are plugged in with tiltable stops Bsdpfxol Tld Ie Ah Sedb * Weld bead as anti-slip coating in the drive-on ramp area * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and non-positive securing of skips; 4 cloverleaf-style lashing cleats on each side * 1 pair of 13.4 t UVV lashing rings at the front * Each side fitted with 4 × 8 t lashing loops recessed in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair), 2,800 × 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Notes: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Perm. total weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer’s warranty * Errors and intermediate sale excepted ----Delivery time: * Immediately available from Egstorf

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: 3 in 1 – for roll-off containers, skip containers, and as a low-loader ----Braking system: Bedel Tnwzspfx Ah Sjdb * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm length, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), can be displayed in the truck via EBS signal (no need for truck-side installation) * LED tail lights 12 / 24 V * 15-pin power connector ----General equipment: * Tool box made of powder-coated sheet steel * Spare wheel holder in cage design on right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking clamps and mechanically insertable stop angles at the front of the track * Can transport up to 2 skip containers with a maximum volume of 10 m³ * Includes 8 repositionable skip stops for lateral centering, front 4 are pinned with pivoting stop * Weld bead as anti-slip surface in the inclined ramp area * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips, 4 lashing cleats in cloverleaf design on each side * 1 pair of 13.4 t UVV lashing rings at the front * 4 x 8 t lashing eyes per side recessed into the outer frame ----Ramps: * Aluminum drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Painting: * Reflective contour tape on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible total weight of 20,000 kg technically possible-- * New vehicle without initial registration, comes with manufacturer’s warranty * Errors and subject to prior sale ----Delivery time: * Available immediately from Egstorf

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: * 3-in-1 – suitable for hooklift, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required) * LED tail lights 12/24 V * 15-pin electrical connector ----General Attachments: * Tool box made of powder-coated steel plate * Spare wheel carrier in basket design on right-hand side * Enclosed side underrun protection * Quarter mudguards with splash guards made of plastic * Plastic rear impact protection buffers * Folding A-board at rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers Bjdpfxowb Raks Ah Ssdb * Steel plate floor with roller recesses in the bogie area * Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm * Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails * Transport of up to 2 skip containers with max. 10 m³ possible * Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable. * Weld seam as anti-slip coating in the inclined ramp area * Mechanical rear drop-down supports ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets * 1 pair of 13.4-ton UVV lashing rings facing towards the front * Four 8-ton lashing eyes per side integrated into the outer frame ----Ramps: * Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Painting: * Reflective contour tape, sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem • Lowloader • Platform Trailer Immediate availability No. for inquiries: 11611 Delivery possible free to your address * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, dual wheels 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized headboard 400mm * Excavator bucket platform made from hardwood, bolted to the headboard * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by support rods and diagonal bracing * Ramp lifters with upright, adjustable springs for single-person operation * 4 UVV drop lashing rings (LC 6300daN) * Perforated outer frame (45°-folded with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum distance of 480 mm; fitting drop lashing rings LC 3000 daN at approx. 600 mm possible) with tight cross-members, high-profile head and tail sections, and rear entry slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN flush-mounted in the existing hole matrix in the outer frame, additionally * Additional lashing options through holes (Ø 50 mm, LC 1200 daN) in the head and end beams * Toolbox in front of the headboard * Side marker lights with indicator pulse * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable landing gear at front, folding supports at rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm eye (hot-dip galvanized), height-adjustable; optionally with 50 mm eye available * 1 removable LED warning light at the rear---- * Leasing, hire purchase, financing, part exchange possible * e.g. 510 euros for 60 months term, no down payment, no final installment Bdedeyndh Hspfx Ah Sjb * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 Outside business hours by appointment We speak German, English, Polish, French Leasing, financing, part exchange available

Koşul: ikinci el, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 4.800 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, Donanım: ABS, Müller-Mitteltal alçak şasi damperli römork - Bir araçta hem alçak şasi hem de iki yandan damperli römork - 40 mm çeki halkası - Basınçlı hava fren sistemi - Yükleme ve boşaltma için destek ayakları - Gigant akslar - Lastik ölçüleri: 235/75 R 17,5 - Tambur fren - Boş ağırlık: 3.620 kg - Yükseklik ayarlı çekme kolu - Muayene son tarihi: 08.2026 - SP son tarihi: 02.2026 - SP son tarihi: - Yükleme alanı uzunluğu: 4.800 mm - Yükleme alanı genişliği: 2.430 mm - Yan tavan yüksekliği: 0,5 m Hatalar ve ara satış ihtimali saklıdır. Dahili araç numarası: 11349. Bsdpfx Ahoyk Rfko Sjdb

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Towing Bar / Flange Towing Eye: * Towing bar height adjustable by 300 mm * Towing bar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrical systems ----General Attachments: * Landing gear at the front * Fold-out rear support legs externally mounted * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofit container lock fittings * 400 mm screwed flat steel front wall * Bolt-on stanchions at the rear * Drop sides with spring assistors ----Load Securing: * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm Bdodpfx Aherwc R Ro Sob * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various drilled holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail in the middle longitudinal axis, lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-up ramps approx. 2,750 x 600 mm (can be pushed together to within 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, towing bar, bulkhead, mechanical drop legs, and drive-up ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 16/2026