Kullanılmış Unsinn Web Dk 3017-26-13 | Pumpless 306X175X30Cm 2600Kg Dreiseitenkipper satın al (17.794)

Durum: yeni, Special price! Stock vehicle from 2023! No initial registration! 9931385 Refrigerated Trailer - Tandem Axle Manufacturer: Unsinn Model: UKT 6C 3015-26-14 Dimensions: 3000 x 1500 x 1900 mm (L x W x H) Gross vehicle weight: 2,600 kg Unladen weight: approx. 775 kg Payload: approx. 1,825 kg (payload may vary depending on configuration and design) Unique torsion-resistant aluminium chassis 4 sturdy telescopic crank supports for up to 6,000 kg static load Thermo-sandwich construction Inner and outer surfaces made from hot-dip galvanized and powder-coated steel sheet for maximum durability Insulation: 40 mm PU core Exterior colour: silver RAL 9006 Double-wing rear door with aluminium hinges Refrigerated compartment handle bar latch Rear frame and edging profiles made of special anodised aluminium sections for an attractive design Loading floor made from stable, multi-bonded, 18 mm thick phenolic plywood 200 mm high impact protection, all-round on 3 sides Cooling unit: Arktik 1600 N Cooling capacity: 1,600 W at +6°C storage temperature and +30°C ambient temperature Temperature control range from +2°C to +10°C 230 V 50 Hz mains connection Evaporator air flow: 750 m³/h Gedpfx Alsy I Epmeyskb Fully encapsulated unit with weatherproof outdoor housing mounted on the front upper section Eco-friendly, CFC-free refrigerant Electronic evaporator defrost system Lockable control display Reinforced jockey wheel Electronic digital thermostat for optimum temperature control Interior lighting Lighting system with 13-pin plug Reversing lights Available options and accessories for this trailer: Shock absorbers including 100 km/h type approval Spare wheel with holder Anti-theft device Registration of your new trailer with the licensing authority

Durum: yeni, Motorcycle Trailer Manufacturer: Unsinn Model: UA 3718-18-13 Internal dimensions: 3750 x 1800 x 150 mm (LxWxH) Permissible total weight: 1800 kg Payload: approx. 1300 kg (payload may vary depending on equipment and construction) Unladen weight: approx. 500 kg Loading height: 460 mm Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics, hot-dip galvanized throughout Three-sided body made from robust steel profiles Continuous loading ramp allows access across the entire width of the loading area 100 km/h version Equipped with automatically adjusting brakes Continuous loading ramp allows access across the entire width of the loading area Foldable license plate holder installed Durable plastic fenders installed Safe and quick lashing all around the outer frame 1 lashing ring centrally located at the rear of the loading area Reinforced automatic jockey wheel for safe parking of the loaded trailer Manufactured from multi-glued phenolic plywood, 18 mm, seamless, anti-slip and waterproof Loading angle in lowered position approx. 5° Lighting system with 13-pin connector and reversing light Hand pump with hydraulic lowering mechanism and lowering lock (only for braked versions) Including vehicle documents Possible additional options and accessories for this trailer: Motorcycle stand Aluminum side wall extension, 400 mm, removable High tarpaulin, 1500 and 1700 mm, available in various colors Gedpfx Aoy I Eiyjlyskb Winch bracket without cable winch 900 kg hand cable winch Spare wheel holder for AS series with mounting kit Spare wheel 175/70 R13 Electro-hydraulics installed in the container with battery and charger, without emergency hand pump Foldable lashing rings Motorcycle tie-down straps * Registration of your new trailer at the vehicle registration office

Durum: yeni, Box trailer as flatbed high loader Manufacturer: Unsinn Model: UKH 5424-30-13 Internal dimensions: 5460 x 2400 x 2100 mm (L x W x H) Gross vehicle weight: 3000 kg Unladen weight: approx. 1220 kg Payload: approx. 1780 kg (payload may vary depending on equipment and configuration) Exterior colour: silver RAL 9006 Unique, torsion-resistant longitudinal beam chassis made from a robust steel frame for safe handling, fully hot-dip galvanized by immersion Walls made of insulating thermo panels, consisting of steel sandwich Reinforced automatic jockey wheel for safe parking when trailer is loaded, load capacity 500 kg Gedey I Egfepfx Alyokb Interior and exterior surfaces made from galvanized and powder-coated steel sheeting for heavy-duty use Insulation: 45 mm PU core Rear double-wing doors with aluminum hinges Stainless steel bar lock Additional bar lock on the left rear door Stainless steel door retainer Loading platform made from multi-bonded phenolic resin plywood, 18 mm thick, anti-slip, waterproof Extra interior height: 2100 mm Aluminum edge profiles for an attractive appearance 2 maneuvering handles mounted on the front wall profile Including vehicle documentation Available additional options and accessories for this trailer: Custom interior fittings Anti-theft device

Durum: yeni, Special Offer! Stock vehicle from 2023! No initial registration! 9931235 Box trailer with double-wing rear doors and sales flap Manufacturer: Unsinn Model: UKU 421719-26-14 VKL Internal dimensions: 4260 x 1750 x 1940 mm (L x W x H) Permissible total weight: 2600 kg Unladen weight: approx. 640 kg Payload: 1960 kg (payload may vary depending on equipment and design) Loading height: approx. 550 mm Colour: white Sales flap on the right-hand side in the direction of travel Unique Panel walls made of GRP-steel sandwich in RAL 9016 Gsdpfsy I D N Sjx Alyjkb Smooth GRP outer walls provide an ideal surface for lettering/wrapping the trailer Steel-reinforced interior walls ensure high impact resistance Double-wing rear door with premium aluminium hinges Robust, lockable rod lock in stainless steel on the rear doors Stainless steel door retainers Loading surface made of multiple-bonded 18 mm phenolic plywood, non-slip and waterproof Lashing system with 8 adjustable lashing eyes for optimal load securing Lashing rails on the side walls and front wall, height 900 mm Transparent roof for high light transmission Rear frame and trim profiles made of special anodised aluminium sections Magnetic, swivelling LED interior light with motion sensor (can be placed anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin connector and reversing light Front marker lights Two shunting handles on the front wall AL-KO coupling head with collision protection Incl. vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Rear sliding supports mounted Custom interior fittings Spare wheel incl. bracket Anti-theft device Registration of your new trailer at the road traffic licensing authority

Durum: yeni, Box trailer with loading ramp and sales flap Manufacturer: Unsinn Model: UKU 301519-20-13 Dimensions: approx. 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2000 kg Unladen weight: approx. 575 kg Payload: approx. 1425 kg (payload may vary depending on equipment and configuration) Smooth GRP exterior walls for optimal vehicle signage/wrapping Inner walls reinforced with steel for high impact resistance Rear loading ramp Sturdy, lockable stainless steel bar lock on the loading flap Stainless steel door retainers Side sales flap on the right (in direction of travel) with robust, lockable stainless steel bar lock Side flap dimensions: approx. 2500 x 1440 mm (L x H) Loading area made of multi-bonded, screen-printed plywood (18 mm), anti-slip and waterproof Load securing system with 8 movable lashing rings for optimal cargo security Gedpfjy I D N Eox Alyjkb Slatted lashing rails on the sidewalls and front wall, height 900 mm Transparent roof with high light transmission Rear frame and edging profiles made of specially anodised aluminium profiles Magnetic, swivelling LED interior light with motion detector (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin connector and reversing lights Front marker lights Two manoeuvring handles on the front wall ALKO coupling head with run-in protection Including vehicle documents Available options and accessories for this trailer: Shock absorbers including 100 km/h certificate Spare wheel including bracket Supporting legs Anti-theft device Registration of your new trailer at the road traffic authority

Durum: ikinci el, Young used trailers from our extensive rental fleet! 9934822 Used turntable trailer by Unsinn Fahrzeugtechnik, 3-axle Manufacturer: Unsinn Type: UD-3 6022-35-13 Loading area dimensions: approx. 6060 x 2200 x 350 mm (L x W x H) Gross vehicle weight: 3500 kg Tare weight: 1060 kg Payload: 2440 kg (payload may vary depending on equipment and configuration) Low loading height thanks to 195/50 R13 C tyres 3-axle chassis ensures outstanding running stability Unique torsion-resistant longitudinal beam chassis for optimal driving characteristics Hollow section construction, fully welded and hot-dip galvanised 8 robust lashing recesses integrated into the frame (4 per side) 10 additional lashing rings beneath the loading area Drop sides and corner posts detachable without tools 13-pin plug Flush-mounted long-throw metal locks Marker lights Loading platform made from multi-bonded, anti-slip phenolic plywood, 18 mm thick First registration: 27.11.2025 Workshop-inspected New roadworthiness certificate (TÜV) available on request Possible additional options and accessories for this trailer: - Mounted spare wheel Godpfx Aloy I Dy Rsyskb - Load securing net including net hooks, fitted on the sidewall - Slide-under loading ramps

Durum: yeni, Special price! Stock vehicle from 2024! No initial registration! 9933125 Box trailer with double wing rear doors and side door on the right in the direction of travel Manufacturer: Unsinn Model: ULK 2642-14-1750 Interior dimensions: 4260 x 1750 x 1940 mm (L x W x H) Permissible total weight: 2600 kg Unladen weight: approx. 640 kg Payload: approx. 1960 kg (payload may vary depending on equipment and configuration) Loading height: 550 mm Color: white Sidewalls made from lightweight GFRP-steel composite sandwich panels, RAL 9016 Smooth GFRP exterior walls for optimal lettering/wrapping of the trailer Steel-reinforced interior walls for high impact resistance Double wing rear doors with premium aluminum hinges Robust stainless steel rod lock (lockable) on rear doors Stainless steel door retainers Loading floor made from multi-bonded phenolic plywood, 18 mm thick, anti-slip and waterproof Load securing system with 8 adjustable lashing rings for optimum load safety Slat lashing rails on the side walls and front wall, height 900 mm Translucent roof panel with high light transmission Rear frame and trim profiles made from special anodized aluminum profiles Magnetic, swiveling LED interior light with motion sensor (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front marker lights Two maneuvering handles on the front wall ALKO coupling head with collision guard Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Anti-theft device Support stands Custom interior fittings Registration of your new trailer at the road traffic authority Gsdpfx Aey I Dxtjlyekb

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 615 kg, azami yük ağırlığı: 1.985 kg, toplam ağırlık: 2.600 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.660 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 1.940 mm, toplam uzunluk: 5.100 mm, toplam genişlik: 2.270 mm, toplam yükseklik: 2.520 mm, lastik boyutu: 185/655R14, renk: beyaz, römork freni: frenli römork, Unsinn UKU 361719-26-14 Unique Box Body Series with High Payload Capacity Thoughtfully engineered, refined, and high-quality box trailer offering excellent road handling and a wider loading dimension. Ideal for transporting high-value goods or equipment. Rear doors: double-winged, lockable, with rubber seal Technical Data: Permissible total weight: 2,600 kg Unladen weight approx. 615 kg - Payload approx. 1,985 kg Braked tandem axle Internal box dimensions (LxWxH): 366 x 175 x 194 cm Overall dimensions (LxWxH): 510 x 227 x 252 cm Tyres: 185/65R14, new Loading height approx. 55 cm Features: Axle and V-drawbar, hot-dip galvanized Maintenance-free rubber suspension axle, overrun brake with reverse automatic and AL-KO handbrake Self-adjusting wheel brakes Highly torsion-resistant aluminium chassis with additional crossmembers for safe driving performance Continuous 18mm anti-slip, waterproof phenolic plywood floor Walls made from lightweight panels, GFRP-steel sandwich in RAL 9016 GFRP exterior suitable for signage; steel interior for impact resistance Roof made from lightweight GFRP sandwich panels, RAL 9016 Stainless steel rotary rod lock and stainless steel door retainers (double doors only) Rear frame and trim profiles made of special anodised aluminium for an elegant appearance Fixed roof, interior light Rear carrier with protected multi-function lighting Waterproof box body, fasteners and fittings in V2A stainless steel Automatic jockey wheel, 500 kg load capacity, centrally mounted for secure stationary support under load Easy fitting of attachments using system profile rails Slat lashing rail at 900 mm height on both sides Sliding lashing system: 8 folding lashing eyes, movable and expandable in the floor rail on both sides Electrics: 12V, 13-pin plug, reversing light Swivelling LED interior light with motion sensor, incl. batteries Various Accessories Available (prices on request): Rear supports for existing system rail Antitheft devices in various versions Loading ramps Motorcycle stand and loading rail Available Options / Accessories (on order): Gedjyg Hu Hspfx Alyokb Ramp instead of rear doors, with lifter, internal aluminium chequer plate covering Additional interior LED lighting Rear supports for existing system rail Antitheft devices in various versions Loading ramps Motorcycle stand and loading rail Refrigeration unit Front door Side hatch (serving hatch) Side door ! Many more trailers at >>> trelex.de ! * Financing and trade-in available! * Huge selection: Over 300 trailers in stock, visit us! * Professional and fair advice, fast processing. * Questions? Just call us! IMPORTANT: Collection without prior order is not possible!

Durum: yeni, makine/araç numarası: 523058, boş ağırlık: 625 kg, azami yük ağırlığı: 1.975 kg, toplam ağırlık: 2.600 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.760 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 700 mm, lastik boyutu: 165 R13, Üretim yılı: 2022, Rear tipper high-bed trailer WEB32 E 2600kg for rent! 1 day = €45 2 days = €40 per day 3 days = €35 per day 4 days = €30 per day Prices incl. VAT. Gsdjtk H H Iepfx Alyokb Electro-hydraulics without hand pump Frame: · Unique, torsion-resistant longitudinal frame chassis for safe handling characteristics · Welded hollow-profile construction, fully hot-dip galvanized by immersion Jockey wheel: · Reinforced, automatic jockey wheel for secure parking of the loaded trailer, Load capacity 500 kg Side panels: · Anodized aluminium hollow-section, fold-down and removable on all four sides, with recessed locks · 4 plug-in steel corner stanchions for high load capacity Loading area: · Steel floor with 6 recessed lashing rings, each with a load capacity of up to 600 daN Electrics/hydraulics: · Lighting with 13-pin connector and reversing light · Electro-hydraulics in a tank with battery and charger, without hand pump

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 530 kg, azami yük ağırlığı: 1.270 kg, toplam ağırlık: 1.800 kg, dingil konfigürasyonu: 1 dingil, izin verilen dingil yükü (dingil 1): 1.800 kg, yükleme alanı uzunluğu: 3.660 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 10 mm, lastik boyutu: 195/ 50 R13C, Üretim yılı: 2026, Toplam ölçüler: 517 x 189 x 72 cm Taban plakası: film kaplı kontrplak zemin Godpjyhp R Hefx Alyokb Yan paneller: alüminyum Bağlama halkaları: Çelik dış çerçevede içte 8 bağlama noktası, yükleme alanı altında 8 bağlama halkası Özellikler: Eğilebilir yükleme alanı, tüm yan paneller katlanabilir/çıkarılabilir, köşe direkleri takmalı, çekiş mili çapraz traversi

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 280 kg, azami yük ağırlığı: 1.020 kg, toplam ağırlık: 1.300 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.300 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 300 mm, lastik boyutu: 195/55R10, renk: gümüş, Üretim yılı: 2024, Chassis Unique, torsion-resistant longitudinal beam chassis for safe driving performance Welded hollow-section construction, fully hot-dip galvanized by immersion Support wheel, 250 kg Load Securing 4 folding lashing recesses, flush-mounted in the floor frame profile, each capable of withstanding up to 600 daN, Dekra certified Gjdpovz Tmzofx Alyjkb Side Walls Anodized aluminum hollow profile, foldable and removable on all four sides, with recessed locks 4 plug-in heavy-duty steel corner posts Loading Platform Multi-layer glued phenolic plywood panel, 18 mm thick, seamless, slip-resistant and waterproof Electrics Lighting with 13-pin plug and reversing light

Durum: yeni, makine/araç numarası: 523058, boş ağırlık: 625 kg, azami yük ağırlığı: 1.975 kg, toplam ağırlık: 2.600 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.760 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 700 mm, lastik boyutu: 165 r13, Üretim yılı: 2022, Donanım: yükleyici, High-loader rear tipper WEB32 E 2600kg Electro-hydraulic system without manual pump Chassis: · Unique, torsion-resistant longitudinal beam chassis for stable driving characteristics · Welded hollow section construction, fully hot-dip galvanized by immersion Support Wheel: · Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Side Walls: Gkjdpsg Nq Spefx Alysb · Anodized aluminum hollow section, foldable and removable on all four sides, with recessed locks · 4 insertable heavy-duty steel corner posts Loading Platform: · Steel floor with 6 recessed lashing rings, each rated for up to 600 daN Electrics/Hydraulics: · Lighting system with 13-pin connector and reversing light · Electro-hydraulic unit in container with battery and charger, without manual pump

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 440 kg, azami yük ağırlığı: 1.360 kg, toplam ağırlık: 1.800 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 3.150 mm, yükleme alanı genişliği: 1.800 mm, yükleme alanı yüksekliği: 150 mm, toplam uzunluk: 4.640 mm, toplam genişlik: 2.370 mm, toplam yükseklik: 950 mm, lastik durumu: 100 yüzde, renk: siyah, Üretim yılı: 2026, Donanım: hidrolik arka platform, Lastik 195/50 R13C Yükleme yüksekliği yaklaşık 460 mm Şasi • Sağlam, galvanizli ve toz boyalı çelik profilden üç taraflı yapı, siyah gri (RAL 7021) • Çekme borulu dingil ile • 100 km/s versiyonu Destek Tekerleği • Güçlendirilmiş otomatik destek tekerleği, 500 kg taşıma kapasiteli, römorkun güvenli parkı için Gkedpfx Aleyv H Rnoysb • Kolay taşıma için manevra kolu Üst yapı • Tüm yükleme alanı genişliğinin kullanımı için katlanabilir plaka tutuculu sürekli rampalı yapı (yukarı çıkmak için) • Sağlam ve yana açılabilir plastik çamurluklar Yük Sabitleme • Yan duvar profilinde monte edilmiş 8 adet katlanabilir sabitleme halkası ile kolay ve konforlu yük sabitleme • Her bir halka 400 daN (kg) taşıma kapasiteli • Ön duvar profilinde 1 sabitleme halkası ve

Durum: ikinci el, 9935924 İkinci el, ızgaralı üst yapıya ve elektrikli pompaya sahip üç taraflı devrilen kasalı araç. Üretici: Böckmann Tip: DK-S 3218/30 Izgara Ölçüler: 3240 x 1800 x 1400 mm (Uzunluk x Genişlik x Yükseklik) İzin verilen toplam ağırlık: 3000 kg İlk tescil tarihi: 24.09.2012 1000 mm yüksekliğinde, 3 taraflı hareket edebilen ızgaralı üst yapı Gkedpfxszu D Aio Alyeb Elektrikli pompa ve acil durum el pompası Alüminyum taban Yük sabitleme ağı Ağ kancaları Yükleme alanında sabitleme halkaları TÜV (Teknik Kontrol) geçerlilik süresi: 10.10.2027 * Atölyede kontrol edildi

Durum: yeni, boş ağırlık: 554 kg, azami yük ağırlığı: 746 kg, toplam ağırlık: 1.300 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.515 mm, yükleme alanı genişliği: 1.330 mm, yükleme alanı yüksekliği: 1.685 mm, Üretim yılı: 2026, kilometre: 50 km, vites türü: mekanik, enerji verimliliği: A, Donanım: soğutma ünitesi, Humbaur HK 13 26 14 - 18 PF30 Basic Soğutmalı Römork / Soğutmalı Kasa Otomobil Römorku Yaş: Yeni (Üretim yılı: 2026) İlk kayıt tarihinden itibaren 2 yıl geçerli periyodik muayene Ruhsat belgeleri dahildir (Araç ruhsatı / Ruhsatname Bölüm 2 ve COC) Gjdsuchk Sjpfx Alyskb Teslimat süresi: Yaklaşık 6 hafta (siparişin alınmasını takiben, bağlayıcı değildir) Finansman, ortak bankalarımız aracılığıyla mümkündür! Teknik Veriler İzin verilen toplam ağırlık: 1.300 kg Boş ağırlık: yaklaşık 554 kg Yük kapasitesi: yaklaşık 746 kg Aks sayısı: 1 Kasa uzunluğu: 2.515 mm Kasa genişliği: 1.330 mm Kasa yüksekliği: 1.685 mm Fren tipi: Frenli, hidrolik fren Şasi: Düşük platformlu (tekerlekler gövdenin yanında), kauçuk yaylı aks Elektrik: 12V, 13 pinli fiş Lastik boyutu: 185/65 R14 Özel ekipman Soğutma ünitesi bağlantı kablosu Koruma çıtası 15 cm Standart ekipman Soğutma ünitesi Dış kısım Beyaz Arka kapı kilitlenebilir, kapı sabitleme mekanizması dahil Saplar Yağmur oluğu Çerçeve profili üzerinde esnek olarak hareket ettirilebilen bağlama halkaları 30 mm kalınlığında PurFerro sandviç yapı Sertleştirilmiş taban plakası Otomatik destek tekeri İç aydınlatma Galvanizli şasi Vidalı ve galvanizli çerçeve V şeklindeki çekme çubuğu AL-KO veya Knott aks ve fren sistemi Aksesuarlar (ek ücrete tabidir) 100 km/s sertifikası, 2 adet tekerlek amortisörü ile donatım dahil Hava hattı rayı Soğutma ünitesi bağlantı kablosu Arka kısımda çift kanatlı kapılar Arka destekler İzolasyonlu taban plakası Kasa iç yüksekliği 188,50 cm Yedek lastik, yedek lastik tutucu dahil Çubuk bağlama rayı Koruma çıtası 15 cm veya 30 cm Yuvalı ankraj rayı İç aydınlatma için kapı kontak anahtarı Römork kilidi Bağlama kayışı Tüm Almanya'ya araç teslimatı Tüm Almanya'da ruhsatlandırma Geçici tescil plakası (5 gün geçerlidir) Not: Ağırlık değerleri donanıma bağlı olarak değişebilir, hatalar, ön satış ve değişiklikler saklıdır! Durum, sürüş uygunluğu: sürüşe hazır, garanti: üreticinin araç garantisi

Durum: yeni, Böckmann Three-way Tipper No hidden costs with us! Freight and vehicle documents are included in the sales price! Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: 1,047 kg Payload approx. 2,453 kg (Payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible coiled cable for the electric pump – can be attached anywhere on the frame Emergency battery cut-off switch AL-KO heavy-duty automatic jockey wheel Aluminium side panels Removable steel corner posts Removable side panels Foldable front panel allows for transport of longer materials Rear swinging tailgate Integrated access hatch for loading ramps at the rear Integrated securing rail for attaching loading ramps at the rear Gkodezaxx Ropfx Alysb Welded and hot-dip galvanized frame and tipping body construction ensure increased stability, torsion, and tipping resistance 4 robust, rattle-free lashing rings (pulling force 500 kg) (contrary to the photos) Integrated pre-drilled holes in the side frame for easy retrofitting of additional lashing points 14-inch tyres ensure high ground clearance Safety prop to secure the tipping body during maintenance Robust lever locks on the sides Rear plastic mudguards including mud flaps Dimensionally stable combination floor – continuous phenolic resin-coated plywood, reinforced with galvanized steel for high point load capacity and impact resistance Front position lights 2 large wheel chocks Bolted V-drawbar Protected housing for battery and all electronics in a splash-proof box Hydraulic hoses safely routed inside longitudinal frame Including vehicle documents Possible additional options and accessories for this trailer: - Ramp compartments incl. aluminium loading ramps - Crank supports - Charger for tipper with electric pump and adapter - Mesh side extensions (600 mm or 1000 mm) - Drop-side extension - Load securing net - Net hooks mounted all around the side panel - Additional 350 mm side wall extension - Toolbox or storage box mounted on the front wall or under the loading platform - Flat tarpaulin in various colours - Shock absorbers incl. 100 km/h certificate - Custom tarpaulin structure - Registration of your new trailer at the licensing authority

Durum: ikinci el, azami yük ağırlığı: 2.510 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2022, bir sonraki muayene (TÜV): 06/2028, yükleme alanı uzunluğu: 3.240 mm, yükleme alanı genişliği: 1.800 mm, yükleme alanı yüksekliği: 350 mm, toplam genişlik: 1.970 mm, toplam yükseklik: 1.110 mm, Üretim yılı: 2022, Böckmann DK 3218/350 Alu * Yüksek yük taşıma kapasiteli * 3 tarafı boşaltılabilen * 1. sahibi * İlk kayıt: 09.08.2022 * Muayene geçerlilik süresi: 06/2028 * Toplam ağırlık: 3500 kg * Yük kapasitesi: 2510 kg * Boş ağırlık: 990 kg * Toplam boyutlar: 4890 mm x 1970 mm x 1110 mm * İç boyutlar: 3240 mm x 1800 mm x 350 mm * 100 km/h hızda kullanım izni * V şeklinde çekme çubuğu * Şasi ve boşaltma platformu sıcak daldırma yöntemiyle galvanize * Acil durum elle pompalı elektrikli pompa * Çok fonksiyonlu aydınlatma * Alüminyumdan yapılmış, tamamen çıkarılabilir yan paneller * Arkadaki kapak menteşeli * Bağlama halkaları * Otomatik destek tekeri * Ahşap taşıma yuvası * 13 kutuplu fiş DİKKAT!!!!! MUTLAKA OKUYUN!!!!! Bu ürünü diğer platformlarda da sunduğumuz için, önceden haber vermeksizin satma hakkımızı saklı tutarız. Ürünün durumu ve uygunluğu hakkında yanlış bir izlenim oluşmasını önlemek için, ürünün incelenmesini ve kontrol edilmesini şiddetle tavsiye ederiz. İnceleme ve kontroller, randevu alındıktan sonra her zaman yapılabilir ve kesinlikle teşvik edilir!!! Hatalar ve yazım yanlışları için sorumluluk kabul edilmez! Bilgiler garanti edilmez! Verilen iç boyutlar yaklaşık değerlerdir. Yeni araçlarda nakliye ve evrak işlemleri için ek maliyetler oluşabilir. NEREDEYSE HER ŞEY İÇİN TAKAS İMKANI!!! TAKAS VE TAKSİT SEÇENEKLERİ MEVCUT!!! Sergi alanı: 58285 Gevelsberg, Am Sinnerhoop 17 Çalışma saatleri: Pazartesi - Cuma 08:30 - 17:00, Cumartesi 08:30 - 14:00 Sürekli olarak 500'den fazla yeni ve kullanılmış römork stoklarımızda!!! Pegasus Anhänger GmbH Gjdszkquqepfx Alyskb Am Sinnerhoop 17 58285 Gevelsberg Tel.: Faks:

Durum: yeni, Böckmann Three-Way Tipper with Electric Pump and Steel Side Walls in Professional Version Manufacturer: Böckmann Model: DK-ST 3718/35 P Internal dimensions: 3740 x 1800 x 400 mm (LxWxH) Permissible total weight: 3500 kg Unladen weight: approx. 1170 kg Payload: approx. 2330 kg (payload specifications may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88H) and emergency hand pump Magnetic cable remote control with flexible spiral cable for the electric pump adheres anywhere on the frame Emergency stop battery master switch ALKO heavy-duty automatic jockey wheel Extra robust hot-dip galvanized steel side walls 400 mm Removable steel corner posts Detachable side walls Folding front panel allows transport of longer materials Rear pendulum tailgate Integrated ramp access flap at the rear Integrated safety bar for attaching ramps at the rear Welded and hot-dip galvanized frame and tipper platform for increased stability, torsion, and tipping resistance 4 sturdy, rattle-free lashing points (pulling force 500 kg) Integrated holes in the side frame for easy retrofitting of additional lashing eyes Gedpoy Na Tpofx Alyekb 14-inch tyres for greater ground clearance Safety support for securing the tipper platform during maintenance Robust lever locks on the side walls Plastic mudguards at the rear, incl. mud flaps Dimensionally stable combination floor – continuous phenolic plywood reinforced with galvanized steel plate for high point load and impact resistance Front position lamps 2 large wheel chocks Bolted V-drawbar Protected housing for battery and complete electronics in splash-proof box Hydraulic hoses securely installed within the longitudinal chassis member Including vehicle documents Possible additional options and accessories for this trailer: - Ramp holders incl. aluminium ramps - Crank supports - Charger for tipper with electric pump and adapter - Mesh extension (600mm or 1000 mm) - Side wall extension - Load securing net - Net hooks all around the side wall - Additional 350mm side wall extension - Tool box or storage box mounted on the front panel or underneath the loading platform - Flat tarpaulin in various colours - Shock absorbers incl. 100 km/h type approval - Custom tarpaulin superstructure For individual and tailor-made financing solutions, simply contact us! We have another 1,500 trailers available at Anhänger-Centrum Rosemeier. Come visit us – we’ll be happy to advise you! Images may show accessories not included in the standard scope of delivery. Due to continuous product improvement, illustrations and technical specifications may vary slightly. Errors and changes excepted!

Durum: yeni, Böckmann Three-Way Tipper with Electric Pump, Mesh Extensions, and Steel Side Walls in Professional Design Manufacturer: Böckmann Model: DK-ST 3718/35 P Internal dimensions: 3740 x 1800 x 965 mm (L.W.H.) Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,170 kg Payload: approx. 2,330 kg (payload may vary depending on equipment and configuration) Mesh extension (600 mm or 1,000 mm) Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for the electric pump attaches anywhere on the frame Emergency stop battery disconnect switch ALKO heavy-duty automatic jockey wheel Extra robust, hot-dip galvanized steel side walls 400 mm Removable steel corner posts Removable side walls Folding front wall enables the transport of longer materials Rear swinging tailgate Integrated retrieval flap for loading ramps at the rear Integrated securing bar for attaching loading ramps at the rear Welded and hot-dip galvanized frame and tipping body construction for increased stability, torsional strength, and tipping resistance 4 sturdy, rattle-free lashing rings (pulling force 500 kg) Integrated holes in the side frame profile for easy retrofitting of additional lashing points 14-inch tyres provide high ground clearance Safety support for securing the tipper body during maintenance Robust angle lever locks on the side walls Plastic mudguards at the rear, including mud flaps Dimensionally stable combination floor – solid phenolic plywood reinforced with galvanized steel sheet for high point loads and impact resistance Front position lights 2 large wheel chocks Bolted V-drawbar Protected compartment for battery and all electronics in a splash-proof housing Hydraulic hoses safely routed inside longitudinal frame Including vehicle documents Available options and accessories for this trailer: Ramp sleeves including aluminium loading ramps Crank supports Charger for tipper with electric pump and adapter Side wall extension Load securing net Continuous net hooks mounted around the side wall Additional side wall extension 350 mm Toolbox or storage box mounted on the front wall or under the loading area Flat tarpaulin in different colours Shock absorbers incl. 100 km/h certification Custom tarpaulin superstructure For customised and tailored financing, simply contact us! Over 1,500 trailers at Rosemeier Trailer Centre. Take a look around. We are happy to advise you. Images may show accessories not included in standard delivery. Due to ongoing developments, images and technical data may differ slightly. Errors and changes excepted! Gkodpfx Alsy Na R Isyeb

Durum: yeni, Böckmann Three-Way Tipper - ECO - Special Edition - No hidden costs with us! Freight and vehicle documents are included in the sales price! - Manufacturer: Böckmann Type: DK-AL 3016/30 Eco Internal dimensions: approx. 3060 x 1650 x 300 mm (L x W x H) Gross vehicle weight: 2700 kg Unladen weight: approx. 750 kg Payload: approx. 1950 kg (payload may vary depending on equipment and configuration) Main frame and steel profile superstructure hot-dip galvanized Extreme stability, torsional and tipping rigidity thanks to continuous longitudinal beams in the upper structure Hydraulic tipping with hand pump Safety support Tamper-proof locking pins Prepared rail storage in the substructure enables retrofitting of rail angle profiles and rails Sidewalls in anodized aluminum Removable steel corner posts 4 recessed, rattle-free lashing rings in the side panel Drop-down front wall Rear plastic mudguards 14-inch tires Steel rims Including vehicle documents Gkedjy Na Adopfx Alyjb Additional options and accessories available for this trailer: Shock absorber including 100 km/h approval Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Mesh extension, 600 mm high, swingable on three sides Net hooks mounted all around on the sidewall Additional sidewall extension, 350 mm Loading ramps Toolbox mounted on the front wall or under the loading area Load securing net Flat cover tarpaulin in various colors Registration of your new trailer with the licensing authority We are happy to show you convenient monthly financing options for your new trailer and will prepare an individual financing offer for you. We have more than 2,000 trailers in stock at all times. You can find many of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may depict equipment not included in the standard scope of delivery. Ongoing developments may cause images and technical data to vary slightly. Errors and changes excepted!

Durum: yeni, Three-way tipper with electric pump Manufacturer: Böckmann Gkjdpfxsy Napks Alyjb Model: DK-AL 3218/30 Internal dimensions: 3240 x 1800 x 350 mm (L.W.H.) Permissible total weight: 3,000 kg Unladen weight approx. 955 kg Payload approx. 2,045 kg (payload may vary depending on equipment and design) Tyres: 14 inch Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Automatic jockey wheel Removable steel corner posts Rail slot in the upper frame (retrofitting of loading ramps is easy) Removable side walls 4 heavy-duty, rattle-free lashing brackets Safety support to secure tipping platform during maintenance Folding front wall Robust lever locks on side panels Plastic mudguards at the rear incl. mud flaps Durable anti-slip plywood floor with galvanized steel sheet for high point loads 2 large wheel chocks Front marker lights Folding front wall for transporting longer materials V-drawbar Strong net hooks along the side under the loading floor Including vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Drop tailgate (shown in photos, not included as standard but available as an accessory) 3-sided mesh extension, foldable, 600 mm Net hooks mounted all around side panel Additional side wall extension 350 mm Aluminium loading ramps, 2.7 t load capacity Toolbox mounted on the front wall or under the loading deck Cargo securing net Flat tarpaulin in various colours Registration of your new trailer with the vehicle licensing authority We are happy to show you financing options for your new trailer with convenient monthly instalments and can provide an individual financing offer. We have more than 2,000 trailers in stock at all times. Many of our trailers can be found online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Please note: Images may show accessories not included in standard delivery. Due to continuous development, images and technical data may vary slightly. Errors and changes excepted!

Durum: yeni, Böckmann Three-Way Tipper - ECO - Special Model with Drop Side Extensions - No hidden costs with us! Freight and vehicle documents are included in the sales price! - Manufacturer: Böckmann Model: DK-AL 3218/27 P Eco Internal dimensions: 3240 x 1800 x 700 mm (L x W x H) Gross vehicle weight: 2700 kg Unladen weight: approx. 935 kg Payload: approx. 1765 kg (Payload may vary depending on equipment and construction) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for E-pump, can adhere anywhere on the frame EMERGENCY STOP battery cut-off switch AL-KO heavy-duty automatic jockey wheel Aluminium side walls Side wall extension 350 mm Detachable steel corner stanchions Removable side walls Foldable front wall for transporting longer materials Rear pendulum tailgate Integrated ramp access hatch at the rear Integrated securing rail for attaching ramps at the rear Welded and hot-dip galvanized construction of the frame and tipping platform ensures increased stability, torsional and tipping resistance 6 solid, rattle-free lashing rings in the side panel (tensile force 500 kg) Integrated holes in the side frame profile for easy retrofitting of additional lashing points 14" tyres provide high ground clearance Safety prop for securing the tipping platform during maintenance Robust lever locks on the side walls Plastic mudguards, rear incl. mud flaps Dimensionally stable combination floor - continuous anti-slip plywood panel reinforced with galvanized steel sheet for high point loads and impact resistance Front position lights 2 large wheel chocks Bolted V-drawbar Gjdpfx Alsy I N Dnjyokb Protected housing for the battery and all electronics in a splash-proof box Hydraulic hoses secured within the longitudinal beam Including vehicle documents Possible additional options and accessories for this trailer: Ramp holders incl. aluminium loading ramps Crank supports Charger for tippers with E-pump and adapter Mesh extension (600 mm or 1000 mm) Load securing net Net hooks mounted all around the side walls Additional side wall extension 350 mm Tool box or storage box mounted on the front wall or under the loading area Flat tarpaulin in various colors Shock absorbers including 100 km/h certification Custom tarpaulin superstructure Registration of your new trailer at the vehicle registration office

Durum: yeni, Böckmann Three-Way Tipper - ECO - Special Edition - No hidden costs with us! Freight and vehicle documents are included in the sale price! - Manufacturer: Böckmann Model: DK-AL 3218/27 P Eco Internal dimensions: 3240 x 1800 x 350 mm (L x W x H) Perm. gross weight: 2700 kg Unladen weight: approx. 935 kg Payload: approx. 1765 kg (Payload figures may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for the electric pump attaches anywhere on the frame Emergency-off battery disconnect switch AL-KO heavy-duty automatic jockey wheel Aluminium drop sides Removable steel corner posts Removable side panels Folding front wall enables transport of longer materials Rear swing tailgate Integrated access flap for loading ramps at the rear Integrated securing bar for attaching loading ramps at the rear Welded and hot-dip galvanized construction of the chassis and tipping body ensures increased stability and resistance to twisting and tipping 6 sturdy, rattle-free lashing rings in the side rail (tensile strength 500 kg) Integrated holes in the side frame profile for easy retrofitting of additional lashing eyes 14" tyres provide high ground clearance Safety support to secure the tipper body during maintenance Robust lever latches on side panels Plastic mudguards at the rear including mud flaps Dimensionally stable combination floor – continuous phenolic plywood reinforced with galvanised steel floor for high point loads and impact resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected compartment for battery and all electronics in a splash-proof box Hydraulic hoses securely routed within the longitudinal member Including vehicle documents Possible additional options and accessories for this trailer: Gkodpfsy I Nxfjx Alyeb Ramp compartments incl. aluminium loading ramps Crank supports Charger for tipper with electric pump and adapter Mesh extension (600 mm or 1000 mm) Sidewall extension Load securing net Continuous net hooks mounted on the sideboard Additional 350 mm sideboard extension Tool box or storage box mounted on the front wall or underneath the load area Flat tarpaulin in various colours Shock absorbers inc. 100 km/h type approval Custom tarpaulin structure Registration of your new trailer with the vehicle licensing office We are happy to show you how you can finance your new trailer in convenient monthly instalments and will provide you with a customised financing offer. We have more than 2,000 trailers in stock at all times. Many of our trailers can also be found online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! The pictures may show optional accessories not included in the standard delivery. Due to continuous development, illustrations and technical data may differ slightly. Errors and changes excepted!

Durum: yeni, Böckmann Three-Way Tipper No hidden costs with us! Freight and vehicle documents are included in the sale price! Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (payload can vary depending on equipment and configuration) - Electric hydraulic pump with battery (12 V/88Ah) and emergency manual pump - Magnetic cable remote control with flexible spiral cable for the electric pump can be attached anywhere on the frame - Emergency stop battery disconnect switch - AL-KO heavy-duty automatic jockey wheel - Aluminium side panels - Removable steel corner posts - Removable side panels - Hinged front panel enables transport of longer materials - Rear drop tailgate - Integrated ramp recess at the rear for loading ramps - Integrated safety bar for securing loading ramps at the rear - Welded and hot-dip galvanized construction of chassis and tipping bridge for increased stability and torsional rigidity - 4 sturdy, rattle-free lashing eyes (pulling force 500 kg), different from illustration - Integrated holes in the side frame profile for easy retrofit of additional lashing points - 14-inch tyres for high ground clearance - Safety support brace for securing the tipper body during maintenance - Robust over-centre latches on the side panels - Plastic mudguards at the rear including mud flaps - Dimensionally stable combination floor – full-length phenolic ply reinforced with galvanized steel for high point-load resistance and impact protection - Front marker lights - 2 large wheel chocks - Bolted V-drawbar - Protected housing of battery and entire electronics in spray water proof box - Hydraulic lines securely routed in the longitudinal member - Vehicle documents included Possible further options and accessories for this trailer: - Ramp channels with aluminium loading ramps - Telescopic supports - Charger for tipper with electric pump and adapter - Mesh extension (600mm or 1,000mm) Gkedpfjy I Ndbjx Alysb - Side wall extension - Load securing net - Net hooks mounted all around on the side panels - Additional 350mm side wall extension - Toolbox or storage box mounted on the front panel or beneath the loading platform - Flat tarpaulin in various colours - Shock absorbers including 100 km/h approval certificate - Custom tarpaulin structure - Registration of your new trailer at the local vehicle registration office

Durum: yeni, Promotion!!! Böckmann Three-way Tipper with Mesh Extension and Load Securing Net Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 950 mm (L.W.H.) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (Payload specification may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for electric pump, can be attached to any point on the frame Emergency stop battery isolation switch AL-KO heavy-duty automatic jockey wheel Aluminium side panels Removable steel corner posts Removable side panels Folding front wall enables transport of longer materials Pendulum tailgate at the rear Mesh extension 600 mm Green load securing net Integrated access hatch for ramps at the rear Integrated securing bar for attaching ramps at the rear Welded and hot-dip galvanized chassis and tipping platform provide increased stability, torsional and tipping resistance 4 robust, rattle-free lashing rings (tensile strength 500 kg) (differs from images) Integrated holes in the side frame profile for easy retrofitting of additional lashing eyes 14" tires ensure high ground clearance Safety support for securing the tipping platform during maintenance Sturdy toggle lever fasteners on the side panels Plastic mudguards at the rear incl. mud flaps Dimensionally stable combination floor - continuous phenolic resin-coated plywood reinforced with galvanized steel floor for high point loads and impact resistance Front position lights 2 large wheel chocks Bolted V-drawbar Protected housing of the battery and entire electronics in a splash-proof box Hydraulic hoses securely routed inside the longitudinal beam Vehicle documents included. No hidden costs with us! Freight and vehicle documents are included in the sales price! Possible additional options and accessories for this trailer: Ramp channels incl. aluminium loading ramps Crank supports Charger for tipper with electric pump and adapter Gkodpoy I I Tbofx Alyob Side panel extensions Net hooks mounted all around the side panel Additional 350 mm side panel extension Tool box or storage box mounted on the front wall or under the loading area Flat tarpaulin in various colours Shock absorbers incl. 100 km/h approval Custom tarpaulin structure Registration of your new trailer with the vehicle licensing authority