Kullanılmış Müller-Mitteltal Gr-Ta 18 Pritsche*Container*Twistlock*Kamera*Top satın al (31.152)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
ANDELST
2.692 km
Düşük yükleyici
Muller Mitteltal3-assige dieplader met oprijrampen Machine / He...
Çağrı
Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2015, toplam uzunluk: 14.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.050 mm, süspansiyon: hava, lastik boyutu: 235/75 17.5, dingil mesafesi: 1.300 mm, Üretim yılı: 2015, Donanım: ABS, = Further Options and Accessories =
- EBS
- Rear air suspension
= Remarks =
- Müller Mitteltal 3-axle low-loader
- 3 × 10,000 kg axles
- Fifth-wheel load: 11,000 kg
- Load platform dimensions: length 930 cm × width 252 cm
- Loading height: 98 cm
- Covered neck dimensions: length 500 cm × width 264 cm
- Neck loading height: 144 cm
- Sliding tarp left and right
- Dimensions of the hydraulic loading ramp:
- Section 1: 270 × 235 cm
- Section 2: 180 × 235 cm
- Lashing points
- 2 storage boxes
Well-maintained and robust low-loader, ideally suited for transporting, among other things, machinery, forklifts, and access platforms!
= Further Information =
Axle configuration
Tyre size: 235/75 17.5
Suspension: Air suspension
Rear axle 1: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 50%; tyre tread left outer: 50%; tyre tread right inner: 50%; tyre tread right outer: 50%
Rear axle 2: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 50%; tyre tread left outer: 50%; tyre tread right inner: 50%; tyre tread right outer: 50%
Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered; tyre tread left inner: 30%; tyre tread left outer: 30%; tyre tread right inner: 30%; tyre tread right outer: 30%
Weights
Curb weight: 10,700 kg
Payload: 25,300 kg
Dedpey I Axxofx Addekl
Gross vehicle weight: 36,000 kg
Condition
Technical condition: good
Cosmetic condition: good
Product Safety
Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL
Küçük ilan
Riederich
2.330 km
Frigofrik römork
MÜLLER-MITTELTAL2-Achs Tandemkühlanhänger 7 m LBW*THERMOKING
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 4.960 kg, toplam ağırlık: 10.500 kg, ilk tescil: 04/1993, bir sonraki muayene (TÜV): 01/2026, yükleme alanı uzunluğu: 6.260 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 2.430 mm, yükleme alanı hacmi: 37 m³, Donanım: ABS, hidrolik arka platform, 2-axle tandem refrigerated trailer, 7 m, with 1-ton tail lift
* THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC
* Vehicle no. for customer inquiries: 4593
* Tail lift
* Air suspension
* EBS (Electronic Braking System)
* Anti-lock Braking System (ABS)
No liability for printing or typing errors
Sale exclusively to business customers
Subject to prior sale and errors. Changes, prior sale and errors expressly reserved. The description serves only as vehicle identification and does not constitute a warranty in the legal sense of a purchase. The description in the purchase contract is binding.
* TOP SERVICE + QUALITY
* We can provide a LEASING-FINANCING-HIRE PURCHASE offer
* Warranty insurance available on request from the insurer
* TÜV / UVV tail lift inspection / Tachograph testing and fitting of OBU unit by our local partners
* 30-day export license plates available
Dodpfx Ajykxfljddjkl
All export documents possible, but must be requested separately individually
* TOLL booking for Toll-Collect can be arranged in-house
* Free transfer from Stuttgart Airport or Metzingen train station (Württ)
* TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT.
* FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas
WHATSAPP Number * *
---- Visit us on our website at
* over 200 vehicles in stock at all times
Küçük ilan
Groß Ippener
2.558 km
Skıp konteyneri
A1 ContainerAbsetzmulde 7 m³ ? RAL 6018 Gelbgrün ? Absetzcontainer
Çağrı
Koşul: yeni, Üretim yılı: 2026, renk: yeşil, toplam ağırlık: 10.000 kg, yükleme alanı hacmi: 7 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT
15 units skip containers according to DIN 30720, open design, type AM 2.7
- Usable capacity: approx. 7 m³
- Paint finish: RAL 6018 (Yellow Green)
- Asymmetric design with single tipping bearing at the tipping edge
- Mounting brackets for skip loader systems according to DIN 30720
- Floor tray made of 6 mm St 37.2 (S235JR) steel
- Side walls made of 4 mm St 37.2 (S235JR) steel
- End profile made of U 100 x 50 x 4 mm
Dksdpfox Ezc Dex Addsl
- All corners reinforced
- Continuous hooks for tarpaulins and nets
- Water drainage hole
- Tipping edge at the rear (front right): a borehole Ø 12.5 mm in the side wall at the bottom
- Container internally primed once, externally primed twice, and externally painted twice in single color
- UVV sticker with safety instructions
- Containers inspected and approved according to DGUV regulation 114-010 (formerly BGR 186)
Offer non-binding, without guarantee or warranty. Subject to prior sale. The purchase is concluded only upon receipt of payment. The vehicle remains our property until full payment is received. We only accept payments in euros without additional costs for the seller and only by bank transfer or cash payment. No checks. Prices stated per unit.
Küçük ilan
Groß Ippener
2.558 km
Roll-off konteyneri
A1 ContainerNormbehälter 15 m³ ? Doppelflügeltür ? RAL 6018 Gelbgrün ? Abrollcontainer
Çağrı
Koşul: yeni, Üretim yılı: 2026, renk: yeşil, toplam ağırlık: 15.000 kg, yükleme alanı hacmi: 15 m³, yükleme alanı genişliği: 2.300 mm, yükleme alanı uzunluğu: 6.500 mm, yükleme alanı yüksekliği: 1.000 mm, IMMEDIATE AVAILABILITY – PRICE PER UNIT
1 unit roll-off container according to DIN 30722-1
Standard container type S 33
Internal dimensions: approx. 6.5 x 2.3 x 1.0 meters (all measurements are approximate)
Usable volume: approx. 15 m³
Paint finish: RAL 6018 (yellow green)
Fittings for hook-lift systems as per DIN 30722-1 (15,000 kg) with rear-mounted external steel rollers and underframe made of INP 180
External rollers are greaseable and replaceable
Mounting bar Ø 50 mm, hook height 1,570 mm
Transition from the underframe to the front wall support reinforced with 10 mm gusset plates
Floor pan made of 5 mm St 37.2 (S235JR)
Dkodoylza Uepfx Addel
Side walls made of 3 mm St 37.2 (S235JR)
Rounded transition between floor and sidewall
End profile made of robust round pipe Ø 90 mm
Frame spacing 750 mm
Frame profile U 80 x 50 mm
Double-wing door with Dutch door lock and lateral safety central locking system as per UVV
Door locking system with container door opening aid
Continuous tarpaulin and net hooks
Galvanized safety ladder at the front as per UVV
Container primed once inside, double-primed outside and double-coated in a single colour outside
UVV safety labels with safety instructions
Container inspected and certified according to UVV (formerly BGR 186)
Offer is non-binding, without liability or guarantee. Subject to prior sale. Purchase only effective upon receipt of payment. The vehicle remains our property until payment has been made in full. We accept payments in Euros only, without additional cost to the seller, and strictly by bank transfer or cash. No cheques accepted. Price stated per unit.
Küçük ilan
Groß Ippener
2.558 km
Roll-off konteyneri
A1 ContainerNormbehälter 36 m³ Doppelflügeltür ? RAL 6018 Gelbgrün ? Abrollcontainer
Çağrı
Koşul: yeni, Üretim yılı: 2026, renk: yeşil, toplam ağırlık: 15.000 kg, yükleme alanı hacmi: 36 m³, yükleme alanı genişliği: 2.300 mm, yükleme alanı uzunluğu: 6.500 mm, yükleme alanı yüksekliği: 2.400 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT
1 piece hooklift container according to DIN 30722-1
Standard container Type S 88
Internal dimensions: approx. 6.5 x 2.3 x 2.4 meters (all measurements are approximate)
Usable volume: approx. 36 m³
Paint finish: RAL 6018 (Yellow green)
• Fittings for hooklift systems according to DIN 30722-1 (15,000 kg) with rear external steel rollers and underframe made of INP 180
• External rollers greaseable and replaceable
• Pick-up bar Ø 50 mm, hook height 1,570 mm
• Reinforced transition from subframe to front wall beam with 10 mm knee plates
Dsdjy Ex Nhspfx Addekl
• Container floor pan made from 5 mm St 37.2 (S235JR)
• Side walls made from 3 mm St 37.2 (S235JR)
• Rounded transition between floor and side wall
• Finishing profile made of sturdy round pipe Ø 90 mm
• Cross member spacing 750 mm
• Cross member profile U 80 x 50 mm
• Double-wing door with Dutch door lock and lateral safety central locking according to UVV
• Door lock with container door opening aid
• Continuous tarpaulin and net hooks around the perimeter
• Galvanized access ladder on front side according to UVV
• Container primed once inside, double primed outside, and double-coated with a single color outside
• UVV safety labels with instructions
• Container tested and approved according to UVV (formerly BGR 186)
Offer non-binding, without guarantee or warranty.
Subject to prior sale. The purchase is only completed upon receipt of payment. The vehicle remains our property until full payment is received. We only accept payment in euros, without additional costs for the seller, and only by bank transfer or cash payment. No checks accepted. Prices are per unit.
Küçük ilan
Groß Ippener
2.558 km
Roll-off konteyneri
A1 ContainerNormbehälter 10 m³ Doppelflügeltür ? RAL 6018 Gelbgrün ? Abrollcontainer
Çağrı
Koşul: yeni, Üretim yılı: 2026, renk: yeşil, toplam ağırlık: 15.000 kg, yükleme alanı hacmi: 10 m³, yükleme alanı genişliği: 2.300 mm, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı yüksekliği: 750 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT
1 piece Roll-off container according to DIN 30722-1
Standard container type S 20
Internal dimensions: approx. 6.0 x 2.3 x 0.75 meters (all dimensions are approximate)
Usable volume: approx. 10 m³
Paint finish: RAL 6018 (Yellow Green)
Fittings for hook-lift systems according to DIN 30722-1 (15,000 kg) with rear external steel rollers and subframe made of INP 180
External rollers greasable and replaceable
Mounting bracket Ø 50 mm, hook height 1,570 mm
Transition from subframe to front wall support reinforced with 10 mm gusset plates
Base tray made from 5 mm St 37.2 (S235JR)
Side walls made from 3 mm St 37.2 (S235JR)
Rounded transition between floor and side wall
End profile made from sturdy round tube Ø 90 mm
Frame spacing 750 mm
Frame profile U 80 x 50 mm
Double-leaf door with Dutch door lock and lateral safety central lock according to UVV
Door lock with container door opening aid
Continuous tarp and net hooks
Galvanized access ladder at front according to UVV
Container internally primed once, externally double primed and externally double coated with single-color paint
Container warning markings according to DIN 67520 Part 2 / DIN 6171 Part 1
UVV sticker with safety instructions
Dedpoymfkgsfx Addokl
Container tested and approved according to UVV (formerly BGR 186)
Offer is non-binding, without guarantee or warranty. Subject to prior sale. Purchase is only concluded upon receipt of payment. The vehicle remains our property until full payment is received. We only accept payments in Euro without additional costs to the seller and only by bank transfer or cash payment. No cheques. Price quoted per unit.
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
Dedpfx Aol Tihxeddjkl
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension with lifting and lowering function
* Fixture in front of the bulkhead and rear slant for retrofitting container locks for transporting 20" containers
* Drawbar with 50 mm flange tow eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lights
* 21 ton GVW design with reinforced frame and reinforced axles
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Fixture on the front bulkhead for optional retrofitting of container locks
* Bolted smooth steel sheet front wall
* Split, trapezoid-profiled steel side walls, foldable with middle drop-in stanchion
* Steel rear wall, can be inserted between the ramps – storage bracket inside the bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 ton lashing capacity every 480 mm
* Option for installing 3 ton folding lashing brackets every 600 mm
* Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN
* In each corner front and rear: 1 x 10 ton lashing ring
* Lashing package with 2 x 8 ton retractable lashing rings per side in the outer frame, various drillings in the front and rear crossmember for 1.2 ton lashing options
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible down to 20 mm)
* Rear ramp angle approx. 860 mm chassis height
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side wall paintwork in a RAL color of your choice (no special or metallic colors), changeable up to approx. 6 weeks before completion
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from week 29 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit 3 mtr Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering system
* Equipment for subsequent installation of container locks for the transport of 20" containers at the front wall and rear slope
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power connector
* LED lights
* 21 t GVWR version with reinforced frame and reinforced axles
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Equipment at the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Split steel side walls, trapezoidal profile, foldable with central drop-in stanchion
* Steel rear wall, retractable between ramps – bracket for storage in front of the front wall when not in use
* Rear stanchions bolted
* Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Preparation for installing 3 t fold-down lashing rings every 600 mm
* Profifix lashing rail along the center longitudinal axis, for lashing up to LC 3000 daN
* 1 x 10 t lashing ring at each front and rear corner
* Lashing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options
* One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
* Drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Loading height (unladen) approx. 940 mm
* (laden) approx. 910 mm
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
* Side panels painted in a RAL custom color shade (no special or metallic paint) – changeable up to approx. 6 weeks before completion
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from week 29 / 2026
Dkedpfx Adeq Dyu Uodol
Küçük ilan
Egestorf
2.484 km
Roll-off dorse
MÜLLER-MITTELTAL14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-
Çağrı
Koşul: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4:
----Braking System:
* Wabco EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar +/- 150 mm
* 40 mm flanged drawbar eye
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tire pressure monitoring system
----General Equipment:
* Jost landing gear, front
* 2 x external drop-down supports at the rear
* Closed-type single plastic mudguards
* Foldable A-frame at the rear
* Plastic underride protection buffer
* Hot-dip galvanized underrun protection with integrated chain storage box, front left & right (dimensions: W = 370 mm x D = 420 mm x H = 480 mm)
----Load Securing:
* Each side equipped with 2 x 5.3 t UVV lashing rings for attaching tensioning elements
* Includes 2 permanently mounted ratchet tensioners with chain box on the outer frame
* Equalizing chain on both sides with eye and quick-shortener, Y special version, 6.3 t
Dkjdspk Dyxjpfx Addel
----Container Stops:
* 2 relocatable container stops for lateral centring of containers
* Front container stops with pendulum-type stop, can be locked in 4 positions
----Paintwork:
* Hot-dip galvanized chassis
* Axles, springs, air tanks, and landing gear painted in black
----Information:
* Lashing capacity with load securing certificate
* Subject to alterations and prior sale
* New vehicle with manufacturer warranty
----Delivery time:
* Available immediately ex stock Egestorf
Küçük ilan
Egestorf
2.484 km
Roll-off dorse
MÜLLER-MITTELTAL14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-
Çağrı
Koşul: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4:
----Braking System:
* Wabco EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
Dedol Thyqopfx Addekl
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Eye:
* Height-adjustable, hot-dip galvanized drawbar (+/-150 mm)
* 40 mm flange towing eye
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* 2 x external drop-down support legs at the rear
* Enclosed single plastic mudguards
* Foldable A-panel at the rear
* Plastic underrun protection buffer
* Hot-dip galvanized front underrun protection with integrated chain storage box, dimensions: W = 370 mm x D = 420 mm x H = 480 mm, front left & right
----Load Securing:
* 2 x 5.3 t UVV lashing rings per side for attaching tie-down elements
----Skip Stops:
* 2 removable skip stops for lateral centering of containers
* Front skip stops can be plugged into 4 positions with oscillating stops
----Paintwork:
* Hot-dip galvanized chassis
* Axles, springs, air tank, and landing gear painted in black
----Information:
* Subject to errors and prior sale
* New vehicle with manufacturer warranty
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL1-achs 9,6 to. kipper mit ALU Bordwänden
Çağrı
Koşul: yeni, azami yük ağırlığı: 6.810 kg, toplam ağırlık: 9.600 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * EK 9.6
----Braking system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
Djdjw Ndr Uspfx Addokl
* Drum brakes
----Axles:
* SAF axle
----Suspension:
* Parabolic springs
----Drawbar / Flange Eye:
* Drawbar as central axle drawbar with 40 mm bolt-on drawbar eye
* Infinitely adjustable drawbar height via spindle lifting element instead of rigid drawbar
----Coupling height:
* Standard coupling height approx. 900 mm (+/- 150 mm)
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED tail lights
* Flashing side marker lights
----General attachments:
* Support windlass at the front
* Enclosed plastic mudguards
* Folding underride guard for paver applications
----Chassis:
* Chassis made of fine-grain steel
----Tipper body:
* Pal.- 3-way tipper body
* 700 mm steel front wall
* Aluminum side walls, asymmetrical, continuous, without center stanchion, foldable with long travel locks and swinging via manual central locking
* 800 mm high steel rear wall with automatic rear wall opening during rear tipping
* 4 mm Hardox 450 steel floor
----Load securing:
* On each side, 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor
----Paintwork:
* Chassis, drawbar, underride guard hot-dip galvanized
* Tipper body painted in a RAL color of choice (no special or metallic paint), color can be changed up to approx. 6 weeks before completion
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. calendar week 42/2026
Küçük ilan
Wiesmoor
2.630 km
Roll-off dorse
MÜLLER-MITTELTALTRA Kombi Anhänger 18,0
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 13.640 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.500 mm, - Yeni HU (Muayene)
- Toplam ağırlık: 18.000kg / 20.000kg
- Boş ağırlık: 4.360kg
- Taşıma kapasitesi: 13.640kg / 15.640kg
Diğer bilgiler
- Çift lastikli 235/75R17,5
- Gigant akslar
- 4 çift yük sabitleme halkası
- PNömatik kilitleme sistemi
- Alçaltılabilir döner şasi
Dedpfx Adjyw Ep Ssdokl
- Yaklaşık 2.300mm'lik rampa, saklama bölmesinde
- Arka destek ayağı
- Ekipman dolabı
- Alt koruma
Küçük ilan
Göttingen
2.411 km
Alçak yükleyici
Müller-MitteltalT3 Kompakt - Dreiachs-Überfahr-Tieflade-Anhänger - Luft - Auffahrrampe
Çağrı
Koşul: ikinci el, makine/araç numarası: GE11/142/2022, boş ağırlık: 6.350 kg, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2008, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, Çok iyi korunmuş, 1. elden araç
Üç dingilli alçak şasi geçişli treyler
Rampalı alçak şasi treyler
Ağır yük taşımacılığı
Tip: T3 Kompakt 30,0
Uzunluk: 8500 mm
Genişlik: 2500 mm
Hava süspansiyonu
Dkedpfx Aen Aw Hksddsl
Ticari/İhracat net fiyatı - 15.990 €
Değişiklik, ara satış ve hatalar saklıdır
=====
Telefon2
Mobil
=====
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4
----Brakes:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED tail lights 12 / 24 V
* Removable LED beacon (rear)
----General Attachments:
* Support winch at the front
* External hot-dip galvanized folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior
* Side underrun protection
* Plastic quarter mudguards
----Low-loader Platform:
* Preparation in front of the bulkhead for retrofitting container locks
* Bolt-on smooth sheet metal bulkhead
Djdpfx Asx Ipapsddskl
* Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter
* Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead)
* Detachable rear stanchions
* Rear approach slope approx. 860 mm
----Flooring:
* 50 mm softwood floor
* 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps
* On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip
----Load Securing:
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t pull-down lashing rings possible every 600 mm
* 1 x 6.3 t lashing ring each at the front and rear corners
* Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart)
----Paintwork:
* Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized
* Axles, springs, air tank, and flange towing eye painted black
* Side walls painted RAL 9010 pure white
----Information:
* --Reinforced and certified body to EN 12642 XL, including load securing certificate--
* Errors and prior sale excepted
* New vehicle with manufacturer’s warranty
----Delivery Time:
Vehicle available immediately
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4
----Brakes:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
Dsdpfx Adox Ipbasdekl
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Drawbar Eye:
* Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Electrics / Lighting:
* Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED tail lights 12 / 24 V
* Detachable LED beacon at rear
----General Attachments:
* Landing gear at front
* Outward-facing galvanized folding supports at rear
* Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior
* Side underrun protection
* Plastic quarter mudguards
----Low-Loader Deck:
* Provision in front of front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet steel
* Trapezoidal profiled steel side walls, foldable with drop-side spring assists
* Sliding steel rear wall between ramps – storage bracket for disuse inside front wall
* Bolt-on rear stanchions
* Rear drive-on gradient approx. 860 mm
----Flooring:
* 50 mm softwood floor
* 12 mm thick and 270 mm wide rubber strip on inside of ramps
* 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember)
----Load Securing:
* Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in front and rear crossmembers for 1.2 t lashing options
----Ramps:
* Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance)
----Painting:
* Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized
* Axles, springs, air reservoir, and flange drawbar eye painted in a black tone
* Side panels painted in RAL 9010 pure white
----Notes:
* --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate--
* Errors and prior sale excepted
* New vehicle with manufacturer's warranty
----Delivery Time:
Vehicle is available immediately ex Eggebostel
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brake System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flange Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12/24 V
* 15-pin socket
----General Attachments:
* Jost landing gear at front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* 50 mm softwood flooring
* Fitting for retrofitting container locks in front of the front wall
* Bolted front wall made from smooth steel sheet
* Side walls made from profiled sheet steel, foldable with drop-side spring assistance
* Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use
* Rear stakes bolted
* Beveled rear drive-on angle approx. 860 mm
----Load Securing:
* Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 6.3 t lashing eye at each front and rear corner
* Various holes in front and rear cross-member for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Drop-side color in RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra charge
Dedpfx Aoq Dyvyjddokl
----Information:
* -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate --
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* RDÜ (Tire Pressure Monitoring System)
* LED taillights 12/24 V
* 15-pin electric connector
----General Attachments:
* Jost landing gear at front
* External hot-dip galvanized folding support legs at rear
* Plastic toolbox, front right outside on front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed loading area:
* 50 mm softwood floor
* Preparation in front of bulkhead for later installation of container locks
* Bolt-on smooth steel front wall
* Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device
* Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead
* Bolt-on rear stanchions
* Rear approach angle approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Provision for fitting 3 t lashing rings every 600 mm
* In each corner at front and rear: 1 x 6.3 t lashing ring
* Various drilled holes for 1.2 t lashing points in front and rear crossmembers
Dkedpfxopk Dv Re Addol
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width)
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps
* Drop side color in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
----Info:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Alsdorf
2.622 km
Çalışma platformlu römork
MÜLLER-MITTELTALETÜTAR 14,4 Tieflader, LED, Runduml.
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem • Lowloader • Platform Trailer
Immediate availability No. for inquiries: 11611 Delivery possible free to your address
* We are happy to provide you with an individual offer
* ----
* GVW: 14.4 t, Payload: 10.95 t
Dsdpfx Aeyndh Hoddjkl
* LED lighting system
* GIGANT axles, EBS, dual wheels 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27m x 2.47m platform with galvanized headboard 400mm
* Excavator bucket platform made from hardwood, bolted to the headboard
* Deck height unladen 930mm / laden 870mm
* One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by support rods and diagonal bracing
* Ramp lifters with upright, adjustable springs for single-person operation
* 4 UVV drop lashing rings (LC 6300daN)
* Perforated outer frame (45°-folded with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum distance of 480 mm; fitting drop lashing rings LC 3000 daN at approx. 600 mm possible) with tight cross-members, high-profile head and tail sections, and rear entry slope, hot-dip galvanized
* 10 UVV lashing rings LC 3000 daN flush-mounted in the existing hole matrix in the outer frame, additionally
* Additional lashing options through holes (Ø 50 mm, LC 1200 daN) in the head and end beams
* Toolbox in front of the headboard
* Side marker lights with indicator pulse
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* Height-adjustable landing gear at front, folding supports at rear
* Retrofitting of 2 container locks possible
* Drawbar with 40 mm eye (hot-dip galvanized), height-adjustable; optionally with 50 mm eye available
* 1 removable LED warning light at the rear----
* Leasing, hire purchase, financing, part exchange possible
* e.g. 510 euros for 60 months term, no down payment, no final installment
* ----
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Fridays: 08:00 - 15:00
Outside business hours by appointment
We speak German, English, Polish, French
Leasing, financing, part exchange available
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜTAR 14,4 Plateau, LED, Runduml.
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low-loader | Flatbed | Trailer
Available immediately | Request number: 27678 | Delivery to your address possible
* We are happy to provide you with an individual offer
Technical Specifications:
* Gross weight: 14.4 t, Payload: 10.95 t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27 m x 2.47 m flatbed with galvanized 400 mm front wall
* Excavator bucket rest made of hardwood, bolted to front wall
* Platform height unladen 930 mm / laden 870 mm
* Single-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured with holding rods and diagonal supports
* Ramp lifters with vertically mounted, adjustable springs for easy single-person operation
* 4 drop-forged lashing eyes (UVV, LC 6300 daN)
* Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum spacing of 480 mm). Installation of drop-forged lashing eyes LC 3000 daN at approx. 600 mm spacing possible. Closely spaced transverse profiling, high-profiled front and rear closure, rear access ramp, hot-dip galvanized.
* 10 recessed UVV lashing eyes LC 3000 daN in pre-existing hole pattern in outer frame, additional options
* Further lashing options via holes (Ø 50 mm, LC 1200 daN) in front and rear beam
* Toolbox positioned in front of the bulkhead
* Side marker lights with indicator function
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* 2 recessed container locks in front cross member
* Height-adjustable support jack at the front, foldable supports at the rear
* Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable; 50 mm towing eye available on request
* 1 removable LED marker light at rear
----
Dsdpfxsyadz Rs Addokl
Leasing, hire purchase, financing, and trade-in available
E.g. 515 euros for 60 months term without down payment or final residual value
----
Our Opening Hours
Monday - Thursday: 08:00 - 17:00
Friday: 08:00 - 15:00
Outside opening hours, we are available by appointment
We speak German, English, Polish, and French
Leasing, financing, and trade-in possible
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampe NEU
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0:
* Wabco EBS brake system
* RDÜ tire pressure monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 10 t BPW Eco axles
Djdpjl Th Hwefx Addokl
* Parabolic springs - 110 mm wide - with tandem equalizer assembly
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at front
* Rear foldable external support legs
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolt-on flat steel bulkhead
* Side walls made of trapezoidal-profile steel sheeting, fold-down with drop-side spring lift assist
* Steel rear wall, slidable between the ramps, storage mount inside front bulkhead when not in use
* Rear stanchions bolted
* Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm
* Option to fit 3 t fold-down lashing rings every 600 mm
* In each corner, front and rear, 1 x 10 t lashing ring, multiple holes in the bulkhead and end cross member for 1.2 t lashing points
* Profifix lashing rail along the centre axis for lashing capacity up to LC 3000 daN
* One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach wedge approx. 860 mm
* Chassis, drawbar, bulkhead, rear wall, ramps and support legs hot-dip galvanized
* Body side walls painted RAL 9010 pure white
* Side walls can be painted in any RAL color for an additional charge
* Axles, springs, air tanks, flange eye and landing gear painted in black
* New vehicle with full manufacturer warranty
* Subject to errors and prior sale
* Available approx. from calendar week 21/2026
* Sample images
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0:
* Wabco EBS braking system
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 10 t BPW Eco axles
* Parabolic springs – 110 mm wide – with tandem equalizing unit
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
Dkedpfx Asl Th Hljddol
* Jost landing gear at front
* External folding supports at rear
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood floor
* Fixture in front of bulkhead for retrofitting container locks
* Bolted flat plate bulkhead
* Trapezoidal-profiled steel side panels, foldable with drop side spring assist
* Steel rear wall, retractable between the ramps – bracket for storage in the front bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to fit 3 t recessed lashing rings every 600 mm
* In each front and rear corner 1 x 10 t lashing ring, various holes for 1.2 t lashing options in front and rear crossmembers
* Profifix lashing rail along center axis for securing up to LC 3000 daN
* One-piece mechanical grating ramps with spring mechanism suitable for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, rear wall, loading ramps, and folding supports hot-dip galvanized
* Side panel painting in RAL 9010 pure white
* Painting in other RAL shades available on request for additional charge
* Axles, springs, air tank, flange towing eye, and landing gear painted black
* New vehicle with full manufacturer’s warranty
* Errors and prior sale excepted
* Available approx. from calendar week 21/2026
* Sample images
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Furth im Wald
2.116 km
Roll-off dorse
MÜLLER-MITTELTALRA18 Abrollanhänger 7m BPW Trommel TÜV 5/2025
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2010, bir sonraki muayene (TÜV): 05/2025, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.300 mm, Üretim yılı: 2010, Donanım: ABS, MÜLLER MITTELTAL RA18 Trailer for Hooklift Containers with External Rollers 5,500 mm – 7,000 mm
German trailer, 2nd owner
Technical Specifications:
- Suitable for hooklift containers with external rollers, lengths 5,500–7,000 mm inner length, designed for rear loading.
Dsdpfx Ajvg T Nyeddekl
Weights:
- Gross vehicle weight: 18,000 kg
- Unladen weight: approx. 3,100 kg
- Payload: approx. 14,900 kg
- Overall length: approx. 9,400 mm
- Overall width: 2,550 mm
- Tyres: 385/55R22.5, approx. 40–70% tread remaining
Features:
- ABS/EBS socket according to ISO 7638 (5- or 7-pin)
- Chassis main frame with raised outer frame guides for containers, hot-dip galvanized
- Container locking:
The container is secured at 4 points by 2 pneumatic transverse locking units.
After sliding the container on, the 4 locking claws are closed by actuating a valve, clamping the container to the chassis frame.
Additionally secured at the front by 2 locking elements (with empty holders) that can be positioned as needed along the guide path.
- 2 x 9-ton BPW 420 mm drum brake axles with air suspension units
- Air suspension with lowering function
- Frame: welded steel construction
- Braking system: Dual-line brakes according to EU regulation EBS
- DUOMATIC coupling head
- Spring-loaded parking brake
- 24 Volt electrical system
- Multi-chamber rear lights
- 15-pin plug with connection cable
- Lighting in line with EU regulations
- Rims: factory silver
- Underrun protection: aluminium profiles
- Wheel chocks with holder
- 1/2 shell plastic mudguards
- Toolbox (approx. 800x300x500 mm)
Condition commensurate with age and mileage!
Transfer/delivery available at additional cost.
All information without guarantee!
Sale only to businesses or for export!
NOTE: PRICE IS NET PLUS VAT
Language support: German, Czech, Polish, Romanian, Russian, English
WhatsApp:
Contact: Josef
Küçük ilan
Bovenden
2.411 km
Mobil beton santrali
Müller-MitteltalMÜLLER MITTELTAL SF32, Liebherr Betonmischer
Çağrı
Koşul: ikinci el, kilometre: 1.100 km, vites türü: diğer, renk: beyaz, toplam ağırlık: 32.000 kg, boş ağırlık: 6.600 kg, azami yük ağırlığı: 25.400 kg, lastik boyutu: 425/65R22,5, ilk tescil: 03/2016, süspansiyon: hava, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, first axle liftable, ABS (anti-lock braking system), underrun protection, landing gear
Dsdpfoi Rk Axex Addjkl
Superstructure: Liebherr concrete mixer model HTM 1004, approx. 10 m³, 2x 10t BPW axles!
Suitable hydraulics for engine PTO on the towing vehicle available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!
Küçük ilan
Groß Ippener
2.558 km
Skıp konteyneri
A1 ContainerAbsetzmulde 7 m³ mit Bauschuttklappe - RAL 6018 Gelbgrün - Absetzcontainer
Çağrı
Koşul: yeni, Üretim yılı: 2025, renk: yeşil, toplam ağırlık: 10.000 kg, yükleme alanı hacmi: 7 m³, IMMEDIATE AVAILABILITY — PRICE PER UNIT
15 units of roll-off container according to DIN 30720 with rubble flap
Dkedpfx Asx Ezd Ioddsl
Type: AM 2.7 KL
Usable capacity: approx. 7 m³
Coating: RAL 6018 (yellow-green)
• Asymmetrical design with single tipping bearing at the discharge edge
• Mounting fittings for lifting system as per DIN 30720
• Base pan made of 6 mm St 37.2 (S235JR)
• Side walls made of 4 mm St 37.2 (S235JR)
• End profile made of U 100 x 50 x 4
• All corners reinforced
• Rear folding rubble flap, secured on each side with an over-centre latch and guided on lower hinges
• Continuous hooks for tarpaulin and netting
• Container inside primed once, outside double-primed and double-coated in single colour
• UVV labels with safety instructions
• Container tested and approved according to DGUV Rule 114-010 (formerly BGR 186)
Offer is subject to change, without obligation and guarantee. Prior sale reserved. The purchase is only concluded upon receipt of payment. The vehicle remains our property until full payment is received. We accept only payments in euro without additional costs for the seller and only by bank transfer or cash. No cheques. Pricing is per unit.
Küçük ilan
Groß Ippener
2.558 km
Roll-off konteyneri
A1 ContainerNormbehälter 22 m³ Doppelflügeltür ? RAL 6018 Gelbgrün ? Abrollcontainer
Çağrı
Koşul: yeni, Üretim yılı: 2025, renk: yeşil, toplam ağırlık: 15.000 kg, yükleme alanı hacmi: 2 m³, yükleme alanı genişliği: 2.300 mm, yükleme alanı uzunluğu: 6.500 mm, yükleme alanı yüksekliği: 1.500 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT
2 roll-off containers according to DIN 30722-1
Standard container type S 55
Internal dimensions: approx. 6.5 x 2.3 x 1.5 meters (all dimensions are approximate)
Usable volume: approx. 22 m³
Paint finish: RAL 6018 (yellow-green)
Mounting fittings for hook-lift systems according to DIN 30722-1 (15,000 kg) with rear external steel rollers and subframe made from INP 180
External rollers greasable and replaceable
Mounting bracket Ø 50 mm, hook height 1,570 mm
Transition from subframe to front wall reinforced with 10 mm knee plates
Base pan made from 5 mm St 37.2 (S235JR)
Side walls made from 3 mm St 37.2 (S235JR)
Rounded transition between base and side wall
End profile made from robust round tube Ø 90 mm
Spant spacing 750 mm
Spant profile U 80 x 50 mm
Double wing door with Dutch door lock and lateral safety central lock according to UVV
Door lock with container door opening aid
Continuous tarpaulin and net hooks
Galvanized climbing ladder at front according to UVV
Container internally primed once, externally double primed, and externally double coated in single color
Dkodpoxdmavefx Addjl
Container warning markings according to DIN 67520 Part 2 / DIN 6171 Part 1
UVV safety sticker with safety instructions
Container tested and approved according to UVV (formerly BGR 186)
Offer is subject to change, without obligation and warranty. Intermediary sale reserved. Purchase is only concluded upon receipt of payment. The vehicle remains our property until full payment is received. We accept payments in Euro only, with no additional costs for the seller, by bank transfer or cash payment only. No checks. Price is per unit.
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal gr-ta 18 pritsche*container*twistlock*kamera*top"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.








































































































































































































































































































































