Kullanılmış Müller-Mitteltal Tandem Tieflader- Tiefbett, 5,5M - Durchfahrbar satın al (2.986)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11 t Gigant axles
Cjdemi Tcqjpfx Ahpjrc
----Suspension:
* Air suspension with lifting and lowering device
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange towing eye and height adjustment by 110 mm via offset plate
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED tail lights 12 / 24 volt
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic Toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped version
* Provision in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the center
* Steel rear wall insertable between ramps—bracket for stowing inside in front of bulkhead when not in use
* Screw-mounted rear posts
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* Load securing package: Each front and rear corner with 1 x 10 t UVV lashing ring; each side with 2 x 8 t UVV retractable lashing rings integrated into outer frame; various boreholes in front and end crossmembers for 1.2 t lashing points
----Ramps:
* Single-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
----Loading Height:
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
----Tyres / Wheelbase:
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, rear flap, folding supports, and access ramps hot-dip galvanized
* ---Axles, air tank, flange towing eye, and landing gear painted in black---
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ Tire Pressure Monitoring System
* Multivoltage
* 15-pin power connector
* 12V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Manual landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox, right-hand side
* Two-step entry at the front left (in direction of travel)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead
* Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking)
* 4 mm steel bed
* Rear ramp mounting rail
----Load Securing:
* One lashing point (5 t) in each corner
* Four lashing rings (3 t each) recessed on each side into the outer frame
----Ramps:
* One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment for ramps recessed under the loading area in the chassis
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
Credpfsq Euagox Ahpoc
* Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tank, flange eye and landing gear painted in black
* Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. calendar week 28 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalisation unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
Cedpfx Ahjl Thw Iepjrc
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox on the right side
* Two-step entry step at the front left (in driving direction)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall
* Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Mounting rail at the rear for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading platform, recessed into the chassis at the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised
* Axles, springs, air tanks, flange towing eye and landing gear painted black
* Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 28 / 2026
Küçük ilan
Riederich
2.330 km
Frigofrik römork
MÜLLER-MITTELTAL2-Achs Tandemkühlanhänger 7 m LBW*THERMOKING
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 4.960 kg, toplam ağırlık: 10.500 kg, ilk tescil: 04/1993, bir sonraki muayene (TÜV): 01/2026, yükleme alanı uzunluğu: 6.260 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 2.430 mm, yükleme alanı hacmi: 37 m³, Donanım: ABS, hidrolik arka platform, 2-axle tandem refrigerated trailer, 7 m, with 1-ton tail lift
* THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC
* Vehicle no. for customer inquiries: 4593
* Tail lift
* Air suspension
* EBS (Electronic Braking System)
* Anti-lock Braking System (ABS)
No liability for printing or typing errors
Sale exclusively to business customers
Subject to prior sale and errors. Changes, prior sale and errors expressly reserved. The description serves only as vehicle identification and does not constitute a warranty in the legal sense of a purchase. The description in the purchase contract is binding.
* TOP SERVICE + QUALITY
* We can provide a LEASING-FINANCING-HIRE PURCHASE offer
* Warranty insurance available on request from the insurer
* TÜV / UVV tail lift inspection / Tachograph testing and fitting of OBU unit by our local partners
* 30-day export license plates available
All export documents possible, but must be requested separately individually
* TOLL booking for Toll-Collect can be arranged in-house
* Free transfer from Stuttgart Airport or Metzingen train station (Württ)
* TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT.
* FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas
WHATSAPP Number * *
Credpfxjykxflo Ahpoc
---- Visit us on our website at
* over 200 vehicles in stock at all times
Küçük ilan
Peine
2.429 km
Alçak şasi römork
MÜLLER-MITTELTALTiefladeanhänger T 3 Profi 30,0 Tiefladeranhänge
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 17.290 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS
* 5-odalı arka farlar
* Turuncu döner uyarı lambası
* Duomatik hava bağlantısı
* BPW-ECO akslar
Codpfsyulu Uex Ahperc
----Üst yapı: Alçak şasi römork, galvanizli şasi (1900+7000mm)/yaklaşık 900mm yükleme yüksekliği, arka kısmı eğimli/yaklaşık 770mm rampa yüksekliği, çelik/ahşap zemin, 3 metreye kadar genişletilebilir, kaymaz kaplamalı hidrolik katlanır rampalar (galvanizli), hidrolik olarak yana kaydırılabilir, sabitleme halkaları
Satış yalnızca ticari işletmelere yapılmaktadır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER EKİPMAN VE AKSESUARLAR İÇİN GARANTİSİZ VERİLMİŞTİR. Tüm satın alma sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmelerinin temeli genel şartlarımızdır (ayrıntılar için künyeye bakınız).
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu yarı römork
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Çağrı
Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Cjdpfxeykx I Ho Ahpsrc
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Çağrı
Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
Cjdpjykx I Tefx Ahpjrc
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Bovenden
2.411 km
Brandalı açık römork
Müller-MitteltalMüller EAL-TA-P 10,5 Tandempritsche
Çağrı
Koşul: ikinci el, boş ağırlık: 3.260 kg, azami yük ağırlığı: 7.240 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2008, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.600 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 3.750 mm, süspansiyon: hava, lastik boyutu: 245/70 R 19,5, renk: gri, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. ABS (anti-lock braking system), air suspension, 2 axles, BPW axles, tandem, curtainsider, lashing rings, lift and lower function, through-loading system, height-adjustable towing bar.
Body: Through-loading via portal doors at the front, sliding mechanisms, tailgate with roller tarpaulin, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!
Cjdpfei Rpxaex Ahperc
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release device for spring-actuated cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Towing Eye / Flange Tow Eye:
* Towing bar adjustable in height by 300 mm
* 40 mm flange tow eye
----General Attachments:
* Jost landing gear front
* Exterior folding support legs at the rear
* Plastic toolbox, front right, mounted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Platform:
* Loading platform 5.37 m
* 50 mm softwood floor
* Bolted front wall made of smooth sheet metal
* Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use
* Rear stakes bolted
Cedpjl Th Nrefx Ahperc
----Load Securing:
* Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals
* Option to equip with 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes for 1.2 t lashing options in the front and rear crossmembers
----Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Approach slope at the rear approx. 860 mm chassis height
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, 40 mm flange tow eye painted in black
* Sideboard painted RAL2011 deep orange
* Painting of side panels in any RAL color available at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Brakes:
* Wabco EBS
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
----General Attachments:
* Galvanized sheet steel toolbox, right side-mounted
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing leg at the front
* Rear: 2 mechanical, hot-dip galvanized folding supports
----Tipper Body:
* Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipper body
* Continuous, drop-side panels without central stanchion, folding with drop-side assist spring
* Rear tailgate can be folded down or swung with manual central locking
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel floor plate
* Rear ramp mounting rail
----Load Securing:
* Each corner with 1 x 5 t recessed and foldable lashing ring
* Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side
Crsdeq Hg Dxepfx Ahpec
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, integrated into the chassis at the rear
----Tyres:
* Tyres: 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Side panels painted in RAL 9010 pure white
* Painting of the side panels in an RAL color of your choice available at extra charge
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release system for spring brake cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
Crodpfx Ahsl Th Ncepsc
* Height-adjustable drawbar, 300 mm range
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at the front
* External foldable support legs at the rear
* Plastic toolbox, front right, mounted externally on the front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ (tyre pressure monitoring)
* LED lighting
----Loading Platform:
* Loading length 5.37 m
* 50 mm softwood floor
* Bolted front bulkhead made of smooth sheet steel
* Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist
* Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* One 6.3 t lashing ring in each front and rear corner
* Various holes in front and end crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Approach slope at rear approx. 860 mm chassis height
----Tyres:
* 235/75 R 17.5 tyres
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted black
* Drop sides painted in RAL2011 deep orange
* Sides can be painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex works Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline:
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye
----Electrics / Lighting:
* RDÜ tire monitoring system
* LED lighting
* 15-pin plug connector
----General Attachments:
* Toolbox made of galvanized sheet steel, mounted on the right side
* Bolt-on underrun protection
* Quarter mudguards made of plastic
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanized fold-down supports
----Tipper Body:
* Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior
* Hot-dip galvanized chassis
* Steel platform, 3-way tipper body
* Continuous side walls, drop-down without central stanchion, with drop-side spring assist
* Tailgate, drop-down and swinging with manual central locking
* Hot-dip galvanized bolted rear stanchion
* 4 mm steel floor plate
* Rear guide rail for drive-on ramps
----Load Securing:
Csdpfx Aov Dz N Aohpjrc
* 1 x 5 t recessed, folding lashing ring in each corner
* 4 x 3 t recessed and folding lashing rings in the outer frame on each side
----Ramps:
* 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area, recessed into the chassis from the rear
----Tires:
* Tires 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing gear painted in black tone
* Drop-side paintwork in RAL 9010 pure white
* Paint finish for side walls in any RAL color available at extra cost
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate in accordance with EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
Cedopk D D Uspfx Ahperc
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to. Tandemtiefl. / Einschubrampen verzinkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9:
----Braking System:
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Drawbar adjustable in height by approx. 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted exterior on bulkhead
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Cargo Area:
* 50 mm softwood floor
* 20" container locks, mounted at front and rear
* Bolted smooth sheet steel bulkhead
* Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters
* Bolted, hot-dip galvanized rear stakes
----Load Securing:
* Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side)
* 1 x 6.3 t lashing ring at each front and rear corner
* Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options
----Ramps:
* 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis
----Paint / Finish:
Cjdsl Tilxjpfx Ahpsrc
* Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall
* Drop side color RAL 9010 pure white
* Side wall painting in a RAL color of your choice available at extra cost
----Information:
* New vehicle without registration
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
Crsdpfxspk D Dms Ahpsc
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
HumbaurHTD 409525-4A 4 Achs Tiefladeranhänger, kein Müller Mitteltal
Çağrı
Koşul: ikinci el, boş ağırlık: 8.680 kg, azami yük ağırlığı: 31.320 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2018, süspansiyon: diğer, lastik boyutu: 235/75R17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5, arka lastik boyutu: 235/75R17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Kasnak halkaları, ABS, uyarı levhalı genişletme, araç talep üzerine satılmaktadır., -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek resimler --, Daha fazla veri için: !, More Details: !
Crsdpozbq Rnsfx Ahpec
Küçük ilan
Wiesmoor
2.630 km
Römork
FLIEGLTTS 100 Tandem 5,5 m Tiefbett Anhänger 101
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 630 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Tandem Low-bed Trailer
First Registration: New vehicle
Gross Weight: 10,500 kg
Unladen Weight: 2,500 kg
Payload: 8,000 kg
Overall Length: 7,280 mm
Loading Length: Platform length approx. 5,500 mm
Width: Platform width 2,050 mm / 2,550 mm
Loading Height: Platform height 630 mm
Additional Information:
plus advance freight / provision ex stock 26639 Wiesmoor €1,280.00 net
- Overall height approx.: 2,900 mm
- Side wall height approx.: 400 mm
Crodpfswwab Asx Ahpjc
- Frame RAL 5001 Green-blue
Chassis: Central axle trailer, low bed
Fine-grained steel welded structure
Telescopic support leg at front
Rear supports telescopic
Wheel chocks with holder
Steel mudguards over both wheels
Drawbar equipment: central axle trailer
Drawbar with certified 40 mm towing eye
Drawbar height adjustable by spindle, max. adjustment range 250 mm
Axles & Suspension:
Euro axles at our discretion, with tapered roller bearings and S-cam brakes
"Axles/chassis laser aligned" to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushing and mechanical axle load equalization (rocker balancing)
Wheels and Tires:
235 / 75 R 17.5" as per manufacturer’s choice
Steel rims, factory silver
Brake System:
2-line air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connector hoses to tractor unit
ABS and ALB, with ABS plug at front, including connection cable
Please note: The trailer may only be towed by towing vehicles that ensure proper ABS function!
Electrical System:
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable plugs at front, with connecting cable
Platform TTS:
Deep steel trough, platform floor with steel/chequer plate covering, steel sides solidly welded to floor
Brake System:
2-line air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connector hoses to tractor unit
24 Volt ABS and ALB, with ABS plug at front, including connection cable
Please note: The trailer may only be towed by towing vehicles that ensure proper ABS function!
Electrical System:
24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED (Note! With certain towing vehicles, diagnostic errors may occur even though the function is ensured.)
2 white position lights at front in LED
2 white/red lane marker lights at rear in LED
2 x 7-pin non-interchangeable plugs at front, with connecting cable
Electrical / ABS / air connection sockets on the drawbar
Platform TTS:
Deep steel trough, platform floor with steel/chequer plate covering, steel sides solidly welded to floor
Platform length 5,500 mm
Trough front and side with “Load-Lock profile” for securing lashing straps
(front 8 pcs., each side 16 pcs.)
Note: Slight floor rippling possible due to welding distortion!
2 pairs of lashing eyes, 1x at the front corners of the steel trough and 1x at the rear in the floor, each rated 5 t
3 additional pairs of lashing eyes in the floor, each rated 5 t
4 pairs of lashing eyes bolted to the side walls
Loading Ramps:
Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable
with hand grip on the ramps
Ramp surface with "Mega Grip" from serrated grating (tipping area with steel/chequer plate)
with gas pressure springs for single-person operation
Küçük ilan
Dabrowa k/Opola
1.891 km
Alçak dorse
Müller-MitteltalTS2 KOMPAKT NACZEPA NISKOPODWOZIOWA
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, toplam uzunluk: 10.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Üretim yılı: 2007, Boş ağırlık: 7.100 kg
Yük kapasitesi: 23.900 kg
Azami toplam ağırlık: 31.000 kg
Csdpfsza Afujx Ahpjrc
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
Müller MitteltalStaufach für Alu- Rampen
Çağrı
Koşul: yeni, süspansiyon: diğer, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm. -- Subject to misprints, errors, and changes. Sample images -- For more details, see: !
Credpfxezai Aae Ahpsc
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
Müller-Mitteltal4-Achs Tieflade-Anhänger T40
Çağrı
Koşul: ikinci el, makine/araç numarası: 39500, boş ağırlık: 8.250 kg, azami yük ağırlığı: 31.750 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/1995, lastik boyutu: 235/75 r17,5 zwilling, renk: turuncu, Further information
Main and outer frame constructed from high-strength double-T profiles, grade ST 52.3, profiled longitudinally in four sections, with high-webbed front and rear end plates as well as crossmembers; frame features a flat-contoured offset drop and rear loading ramp slope (0.8 m in length) behind the bogie passage; lowest possible floor height achieved by recessed wheel wells above the rear wheels; bogie platform's front corners are chamfered at 45 degrees.
Two recessed UVV lashing rings each located on the bogie platform and on the loading ramp slope for attaching tensioning devices. Rear end equipped with wide bearings for a sixfold-supported ramp shaft. Side safety guard with protective bar compliant with EC regulations, wheel chocks with clamp safety feature.
Low-maintenance inclined roller bearing axles with automatic brake adjusters, dual-line compressed air brake system in accordance with EC standards, and parking brake.
Bogie and towing drawbar: Manufactured from double-T profiles in a welded construction with a slewing ring connection, standard drawbar length 1500 mm, fitted with 8 drawbar eyes (50 mm diameter), support leg with threaded spindle height adjustment; vehicle does not have axle load compensation!
24 Volt electrical system, two interchangeable 7-pin connection cables, large rectangular four-chamber taillights including rear fog light and reversing spotlight, front distribution box, rear outline marker lights, side marker reflectors, as well as bracket for single-line license plate.
Crodpfx Ahei Rixgopsc
Undercarriage made of 40 mm thick pressure-impregnated pine wood. Low-bed platform and ramp slope feature crossed upper decking, 30 mm thick, laid lengthwise; total floor thickness is 70 mm. Bogie platform features a longitudinal simple floor with a recessed, open tool box, dimensions L 700 x W 800 x D 180 mm.
Ramps: Welded construction with tray sheet, cross beams, longitudinally-laid wooden decking (50 mm thick), ramp ends reinforced, ramp holding rods with turnbuckle and lock, ramps can be shifted 470 mm to each side, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with external and internal springs for easy single-person operation, with automatic ground supports.
Steel shot blasted, zinc phosphate primed, single-colour acrylic finish in RAL colours, wheels painted silver, available in standard, light, and metallic colours as well as two-tone paint finishes; wood surfaces stained.
Küçük ilan
Diespeck
2.278 km
Alçak yükleyici römork
Müller-MitteltalT3 kompakt
Çağrı
Koşul: ikinci el, boş ağırlık: 7.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2006, yükleme alanı uzunluğu: 9.100 mm, yükleme alanı genişliği: 2.750 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: gri, Donanım: ABS, Kampanalı fren
Taşıma kapasitesi 22.200 kg
Kauçuk zemin
Hidrolik çift rampalar ve hidrolik kaydırma
Gigant akslar
Cjdpfxowh Rwvo Ahporc
Hatalar hariçtir
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Othmarsingen
2.371 km
Alçak şasi dorse
MÜLLER-MITTELTALT3 Zwangsgelenkt
Çağrı
Koşul: ikinci el, toplam ağırlık: 34.000 kg, ilk tescil: 07/2010, - Galvanized low loader
- Ramps mechanically spring-assisted
- Rear axle with forced steering
- 900mm loading height
Cjdezbzbdepfx Ahperc
- 8,700 kg unladen weight
- Excellent condition
Küçük ilan
Landsberg am Lech
2.201 km
Alçak şasi römork
MÜLLER-MITTELTALT4PROFI 40,0 Gummibelag BPW
Çağrı
Koşul: yeni, azami yük ağırlığı: 32.300 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, B 11.160 mm
Unladen weight: 8,700 kg
Axle load: 4 x 10,000 kg
Loading length over turntable: 2,900 mm (incl. 390 mm bevel)
Loading length: 6,780 mm
Loading height: 855 mm (-60/+140 mm)
Width: 2,550 mm, extendable to 3,000 mm
Excavator trough integrated at rear of chassis
BPW axles with air suspension and axle load scale
2-piece hydraulic ramps, 4,650 mm long, 720 mm wide
Hydraulic ramp adjustment
Cjdpfx Aoy U Tphshpsrc
Hydraulic rear support legs
Full rubber flooring
Toolboxes
Galvanized
Swivel drawbar with 40/50 mm eye
Küçük ilan
Empfingen
2.363 km
Ticari araç
Müller-Mitteltal3 Achs Anh für Container Frontbeladung TÜV03 27
Çağrı
Koşul: ikinci el, ilk tescil: 10/2014, toplam ağırlık: 27.000 kg, boş ağırlık: 5.100 kg, renk: gri, vites türü: diğer, emisyon sınıfı: hiçbiri, Üretim yılı: 2014, azami yük ağırlığı: 21.900 kg, bir sonraki muayene (TÜV): 03/2027, süspansiyon: çelik, lastik boyutu: 265/70 R19.5, ön lastik ölçüsü: 265/70 R19.5, arka lastik boyutu: 265/70 R19.5, şoför kabini: diğer, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, elektronik denge programı (ESP), kamyon kaydı, sisal lambaları, şasi, Müller Mitteltal 3-axle trailer for skip containers TM 2 24.0
* Suitable for 2x 12 m³ containers/skips
* Lowerable pneumatic drawbar for front loading
* Adjustable stop point for container mounting
* Manual lashing with ratchets
* Sealed floor
* BPW axles
* Leaf suspension
* Galvanised frame/chassis
* Drum brakes
Crsdpfx Aezbbbdjhpoc
* Wear plates
* Additional auxiliary lights
* 7 lashing rings per side, mounted externally
* Large toolbox
* Weights: GVW – 27,000 kg, Tare – 5,170 kg, Payload – 21,830 kg
* German vehicle with German documentation!
* 1st owner!
* First registration: 21.10.2014
* Vehicle inspection (TÜV) valid until 03/2027
* Safety inspection (SP) valid until 09/2026
* VIN: WMM00000E0058208
Subject to prior sale, errors, and changes!
Some company logos have been removed from the images – please ask if needed!
No guarantee for the functionality of extra features!
Your contact:
Christoph Ott
Tel. & WhatsApp:
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger
Çağrı
Koşul: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML:
----Braking System:
* EBS brake system
* Drum brakes
----Axle:
* BPW axle
----Suspension:
* Parabolic springs
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
* Flashing LED side marker lights
----Drawbar / Flange Towing Eye:
* Drawbar with 40 mm screwed towing eye (height adjustable, mm)
----General Attachments:
* Support winch at front
* Spring-assisted square tube supports at rear with base plate, safety locking bolts for various support heights
* Closed steel fenders with splash guards
* Closed side underrun protection, usable as advertising space
* Plastic toolbox with base insert (installed horizontally), approx. 500 x 350 x 400 mm
----Superstructure:
* Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the support arm ends, as well as fixation of the cable drum superstructure to the chassis by a centrally positioned claw lock
* Motorized hydraulic drum drive with hydraulic motor
* Valves and adjustable rubber-coated drive rollers
* Hydraulic speed regulator and brake for drum drive
* Steel drum shaft with 76 mm diameter, with centering and rotatable ends
* 1 pair of polyamide centering cones, stepwise offset
* Preparation of steel construction and hydraulics for retrofitting a separate motor
----Chassis:
* Chassis made from torsion-resistant square tubes and crossbeams
----Hydraulic System:
* Hydraulic supply and return lines
----Tyres:
* 315/80 R 22.5 tyres
----Paintwork:
* Vehicle is hot-dip galvanized
----Information:
* 2,690 kg unladen weight
Cedpfjxyniwox Ahporc
* Brand new vehicle with full manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal tandem tieflader- tiefbett, 5,5m - durchfahrbar"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.





















































































































































































































































































































































