Kullanılmış Faymonville 5-Achs-Tele-Semi M. Hydr. Rampen satın al (60.894)

Koşul: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specifications available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform, extendable design: * Loading platform with extendable section and rear chamfer approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over axles Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve * Axle tools included Tyres: * Tyres 245/70 R 17.5 3PMSF, load index (146/146 F) * Manufacturer at our discretion * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface per ISO 11992 * For correct display, the tractor unit must support transmitting and displaying these data Landing legs: * JOST landing legs (mechanical), 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Paintwork: * Complete steel structure shot-blasted automatically after welding * Second blasting using corundum for optimum coating adhesion * Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metalized and painted in RAL 9010 (pure white) * Metallic paint not available * Coating tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Steel structure: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicators * ASPÖCK-UNIBOX located on the front connection strip, with 24N, 24S & 15-pin sockets according to ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: Csdpoxbmpfjfx Aldjgt * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on front galvanized connection strip * Electro-hydraulic unit * Forced steering front/rear via cable remote control (push buttons), with single-track control of the axles (no installation in the tractor unit) * Galvanized folding supports under the rear chamfer of the platform * 1 pair of recessed lashing rings along the rear central member in the chamfer (LC 10,000 daN) * Plug-in aluminium side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H) * Rear galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30?) or

Koşul: yeni, azami yük ağırlığı: 39.670 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Summary of equipment. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 30 mm thick hardwood flooring * Gooseneck at the rear, straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) * 1 pair of lying lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, diamond plate over the axles Landing Legs: JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two fixed and two self-steering axles * Air suspension with lifting/lowering function * Self-steering axles with electromagnetic reversing lock, can be activated via reverse gear or manually * Drum brakes * Axle tools Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the tractor via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Brake System: * Brake system in compliance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Steel Construction: * Steel structure made from high-strength fine-grained steels Cjdpsxarlvefx Aldegt * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Secondary blast treatment with corundum for optimal coating adhesion * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Final paint finish with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL 841GL * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) * Metallic paints not possible * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical System: * Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets; connections according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanised front connection rail * Galvanised drop supports under the ramped section of the loading area * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * Removable ALU side boards and rear gate approx. 2,440 x 400 mm (L x H) on the gooseneck * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support block with 1 pair of WADER container pockets; fifth wheel load approx. 20,000 kg * 7 pairs of WADER container pockets for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container above the gooseneck, 2x 20' container * 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area * One galvanised crosswise holder under...

Koşul: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN) Cjdpeyhkq Ujfx Aldegt * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout via reverse gear and manual activation * Air suspension with lift and lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS Tyre Pressure Monitoring System according to ECE R 141 Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey Incl. the following additional features: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic unit at the rear, under the loading platform * On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated into the chamfered gooseneck * 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional hook-on intermediate table, ap

Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: Cjdpsyhkrrefx Aldegt * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller Cgjdpfx Ajyhkqzsldet * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Koşul: yeni, boş ağırlık: 9.450 kg, azami yük ağırlığı: 35.550 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.500 mm, yükleme alanı genişliği: 1.560 mm, toplam genişlik: 2.550 mm, lastik boyutu: 385/65 R 22,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck designed as a loading platform with aluminum chequer plate surface - Front bevel approx. 45° - Hydraulic lifting rocker, lifting and lowering range approx. -280/+250 mm - Two kingpin positions at 2,300 and 2,000 mm - For tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, approx. 9,500 mm long, with angle profiles underneath for pallet accommodation (distance kingpin to axle centre approx. 8,000 mm) Axles, Suspension, and Tyres: - BPW stub axles, with drum brakes, independent wheel suspension, hydraulic axle equalisation with lift and lower function - Lowering lock on axles in case of suspension airbag rupture, designed for max. pallet height of 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure monitoring sensors mounted on all wheels including spare wheels - TPMS system in accordance with ECE R 141 Surface Treatment: - Complete steel structure automatically shot-blasted with blast wheel unit after welding - Second blasting with corundum for optimal coating adhesion - HRM metallisation of entire chassis with ZINACOR 850 (85% zinc / 15% aluminium) for optimum corrosion protection - Final coating: 2 coats of 2K topcoat, single colour in Novagrau (DB 7350) - Paint structure tested in salt spray test according to ISO 9227-NSS, cavities sealed with special wax Standard Accessories: - Removable steel front wall, approx. 400 mm high - Tool box with lid recessed at rear of gooseneck, approx. 640 x 700 x 215 mm - Plug-in ALU rear wall on gooseneck, approx. 400 mm high, anodised - One pair foldable ALU side walls on gooseneck, approx. 400 mm high, anodised - 2" kingpin Cgedpfx Aeygvc Hsldjt - 3 pairs recessed lashing rings on gooseneck (LC 6,300 daN) - At the front connection rail, yellow-red air couplings, lighting for operating gooseneck, suspension and hydraulic bracing with on/off switch - Mechanical drop tube supports for approx. 48,000 kg support load - Boarding ladder mounted on front right with 2 plug-in handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN) - On the longitudinal beams, grating inserts level with guide rails of cargo restraints - Hydraulic pre-installation incl. control unit for mounting 3 pairs of our hydraulic cargo restraints - First and last axle liftable manually left and right - Storage boxes behind the axle unit left and right, splash-proof - Rear taper for easier pallet insertion - Rear cross member with lugs for mechanical bracing - 7-pin socket at the rear cross member - Electro-hydraulic unit - 4 wheel chocks with holder - 2 axle load gauges mounted on the left incl. axle load chart - 3 pairs of hydraulic cargo restraints with swivel arms, slideable on longitudinal beams - Rear door with cross bracing, hinged left, hydraulically locked right, can be latched horizontally at 90°, 105°, and 270° - Fold-up underride guard for transporting up to 4 empty standard pallets - 1 spare wheel - Number plate with bracket incl. lighting, rear left on trailer - Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX brand, for standard grease

Koşul: yeni, boş ağırlık: 6.350 kg, azami yük ağırlığı: 38.650 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Platform: - 2 pairs of external foldable lashing rings (LC 5,000 daN) - 24 pairs of cutouts in the platform’s outer frame for attaching tensioning straps (LC 2,000 daN) Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), with raise/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system according to EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not possible Steel Construction: - Steel construction made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting 24 Volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin - Wiring according to ISO norms: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings on the galvanized front terminal strip - 4 wheel chocks with holder - 2" king pin - A galvanized steel front wall approx. 1,600 mm high. EN12642-XL - White reflective tape according to EU regulations on the sides and red on the trailer’s rear - European reflective plates (red-yellow) at the rear of the trailer - Platform with approx. 30 mm thick hardwood floor, fitted in omega profiles - 10 pairs of stake pockets for 100 x 50 mm slot-in stakes in the platform’s outer frame - 3 pairs of transverse stake pocket strips mounted on the platform for 100 x 50 mm slot-in stakes - Storage tray for 1,000 mm slot-in stakes at the rear in the central beam - 1 spare wheel carrier under the platform on the right side (direction of travel) - One mudflap at the rear of the trailer - Manual and documentation on USB stick - One bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear apron, brackets on both sides for warning signs including socket - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, flush with the rear - 80 km/h speed limit stickers at the rear and on both sides - Four warning signs extendable by approx. 400 mm, each approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame Cjdjiu Etkspfx Aldsgt - Complete steel structure shot-blasted, then the defined visible surfaces metalized and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Koşul: ikinci el, boş ağırlık: 9.600 kg, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2012, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, renk: gümüş, Üretim yılı: 2009, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German trailer * 1st hand * Condition, see photos * Low loader Goldhofer, type STN-L3-39/80 * 3-axle low loader with extra-long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 support legs * Steering trailing axle * Leaf/air suspension with lifting/lowering function * Heavy-duty DIN lashing eyes * EBS * ABS (anti-lock braking system) * Storage box * Twin tires * Permissible gross weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new TÜV inspection is desired, we are happy to offer a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Csdswxm Ilepfx Aldjgt Note: We offer and strongly recommend an inspection and examination of the goods to avoid any misunderstandings regarding condition or suitability on the buyer’s side. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All details are without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is required to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2020, renk: kırmızı, Üretim yılı: 2020, Donanım: ABS, Rear axle 1: Twin tyres Rear axle 2: Twin tyres; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable superstructure: Yes Technical condition: Very good Optical condition: Very good Codpfxox Upxxe Aldogt Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x Steering axle (trailing) Tyre size Extendable loading platform Length 680 cm + 420 cm extendable, total loading platform length 1,100 cm Loading platform width 254 cm Loading platform height ±86 cm Gooseneck length 330 cm Lashing eyes, pockets, twistlocks Follow us on Instagram: geurtstrucks Low loader is year of manufacture 2016, but sold as new in 2020 Wir sprechen Deutsch Hablamos Español We speak English

Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Codpew Tpq Dofx Aldogt Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Koşul: yeni, azami yük ağırlığı: 91.640 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment specification. Complete equipment details available on request. Gooseneck * Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4. 3-Axle Compact Front Bogie * Hook mounts at front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendle axle Front Bogie * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position * Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle 5-Axle Rear Bogie * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position * Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey Including Accessories * Steel front wall, approx. 400 mm high * Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connectors on gooseneck * BEKA-MAX central lubrication for one 3-axle bogie * One 7-pin socket left and right at rear of the front bogie for warning panels * Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm * The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension * Steel mattresses with rubber flooring, approx. 12 mm thick * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * Socket on rear bogie for cable remote control of rear steering * Rear bogie with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right Cgodpfsuvbdtex Aldst *

Koşul: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches) * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized * One removable aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering * 2" kingpin * Socket at the rear of the gooseneck for aluminum loading ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOADING AREA * Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10° * A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered * 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF, twin mounting * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg * Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient) * 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanised widenings, approx. 230 mm per side (without wooden planks) * Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * Widenable U-profiles for inserting the aluminum covers: - on the fixed section behind the gooseneck - on the intermediate platform - on the extendable loading area * Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts * Aluminum elements lockable on the extension tubes of the widenings * 1 pair of mechanical rear supports * Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit HYDRAULIC LOADING RAMPS Cjdpjtx Nwnofx Aldjgt * One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional

Koşul: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load Platform * Double extendable version with rear chamfer approx. 500 mm x 8° * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 4 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 1 cross table approx. 250 mm * Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles * Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve * Axle tool kit Tyres: * Tyres 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing Legs: Csdpfx Aow Tprzoldsgt * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: High-quality, durable corrosion protection * High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel Construction: Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front wiring panel * Spare wheel carrier in front of the front wall * Electro-hydraulic power unit * Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit) * Rear gooseneck mounting point for aluminum loading ramps * Rear hanging rail for aluminum loading ramps * Galvanized folding supports under the rear chamfer of the load platform * On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * Removable galvanized rear stanchions (body length approx. 2,560 mm) * Tool box, galvanized, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers * 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area * Galvanized wideners, extendable by approx. 230 mm per side * Movable hanging rails for aluminum loading ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump * 2 LED reversing lamps mounted on the rear panel * HRM Metallization (High Resistance Metallisation). Complete steel structure sh

Koşul: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment list available on request. Gooseneck * With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck * 3 pairs of lashing rings (LC 5,000 daN) Load Platform * Extendable version * 5 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN) * Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN) * Approx. 48 mm hardwood flooring, over the axles with checker plate covering Landing Gear * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift/lower valve Braking System * In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction * Manufactured from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red * Rims in silver Included Accessories * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection rail: yellow-red air couplings * 4 chocks with holders at the front wall Cjdpfxsv Etx Ej Aldjgt * Spare wheel carrier in front of the front wall * Electro-hydraulic power pack * Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included) * European reflective plates (red/yellow) at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right * Mount for a beacon at the rear of the trailer * Galvanized folding supports under the inclined portion of the load platform * Load gauge to determine axle loads, including load chart * 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers * Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg * 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform * Galvanized, extendable widening brackets by approx. 230 mm per side * Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic warning signal when reversing * HRM Metallisation (High Resistance Metallisation)

Koşul: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section * Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each * Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward foldable lashing rings (LC 5,000 daN) * 3 pairs of outward foldable lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle self-steering * Technical axle load: 12,000 kg each Cjdow Tpqwepfx Aldogt * Electromagnetic reversing lock, can be engaged via reverse gear and manually * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – Brand of our choice * TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system as per EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * Complete steel structure automatically shot-blasted with turbine system after welding * Second sandblasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver * Rear section metalliz

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, * Uzatılabilir * Takip kontroll aksı * Hidrolik yükleme rampaları * Havalı süspansiyon -----Dahili araç numarası: 11555----Hatalar ve ara satış hakkı saklıdır WhatsApp desteği mevcut! Cgedpfx Asx I Uyheldst Araçla ilgili sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca ulaşabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, From ongoing production Total weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Cgsdpfx Asuytx Seldjt Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: 8,670mm total, 2,520mm gooseneck, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information: - Steel welded construction - Turntable with robust slewing ring - Folding rear support - Chocks with holder - Aluminium side underrun protection - Full-width rear mudflap (not in combination with forklift bracket) - Half-shell mudguards on 1st axle with anti-spray mudflaps - Anti-spray mudflaps behind 2nd and 3rd axles - Plastic toolbox - Extendable width to 3,000mm - Central storage compartment for wooden planks on the loading area - 70mm wooden planks for extension to 3,000mm - Lashing eyes low bed - 1 pair of lashing cutouts recessed in the front longitudinal beam on the gooseneck, each rated at 10 tons - 4 pairs of lashing holes in the external frame of the gooseneck, each rated at 5 tons (for attaching lashing straps) - 7 pairs of lashing mushrooms inserted on top and side of the external frame, each rated at 10 tons - 1x on the gooseneck, 6x in the low bed - Pair of ring lashing eyes recessed in the external frame, each rated at 5 tons (convertible to stake pockets) - Additional pair of folding lashing eyes, each rated at 10 tons - 1x on the gooseneck - 1x recessed in the floor behind the last axle Towing device/trailer turntable: - Drawbar with certified 40mm eye - Drawbar height adjustable by spring Axles & suspension: - Drum brake axles, manufacturer’s choice - "Laser-measured axles/chassis": reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels & tyres: - 235/75 R 17.5'' - Manufacturer’s choice - Twin steel rims, factory silver Braking system: - Two-line air braking system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at the front, with connecting lines to towing vehicle - 24V ABS and ALB, with ABS plug at the front, incl. cable Electrics: - 24V, multi-chamber lights, yellow LED side lighting - 2 white position lights at the front - 2 white/red clearance marker lights at the rear - 2x 7-pin non-interchangeable plugs at the front, with cable - LED beacon with bracket, operated via parking lights (removable beacon) - Pair of warning boards double LED-lit and extendable to 3,000mm Floor: - Gooseneck front with steel / checker plate covering - Storage compartment recessed in the transition slope to the gooseneck - Then approx. 70mm softwood floor, with steel/checker plate covering in wheel arch areas - Rear bevel with 70mm softwood floor - Low bed area including rear bevel 6,500mm Access ramps: - Steel ramps, 2,800mm long, 750mm wide, laterally adjustable - Additional ramp securing, foldable below (prevents lateral shifting of the ramps; not compatible with hydraulic ramp shifting) - Wood covered (tip portion with steel/checker plate) - Hydraulic via tractor PTO with throttle, operation at left front side - Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Painting: - Frame hot-dip galvanized incl. passivation - Ramps hot-dip galvanized Plus delivery/preparation from stockyard 26639 Wiesmoor: €1,280.00 net

Koşul: yeni, azami yük ağırlığı: 23.920 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, YENİ ARAÇ Fliegl 3 dingilli alçak şasi treyler Tip DTS 300, sıcak daldırma galvanizli Toplam ağırlık 24.000 kg / 30.000 kg Yük kapasitesi 17.920 kg / 23.920 kg Boş ağırlık 6.080 kg Toplam uzunluk 10.900 mm Yükleme uzunluğu 8.680 mm Yatak alanı 6.500 mm, 900 mm yaklaşım rampası dahil Parabolik süspansiyon 2.800 mm uzunluğunda rampalar, hidrolik kumandalı Cgjdoxb Nmyspfx Aldst 3.000 mm'ye kadar genişletilebilir, uyarı levhaları ve döner flaşörle birlikte 5,0 ve 10,0 tonluk sabitleme noktalarıyla büyük bağlama paketi 5 çift kazık cebi 40 mm çekme halkası Ek olarak nakliye/hazırlama, Wiesmoor stok yerinden 1.280,00 €/net Kiralama teklifi: Vade 48 ay, kalan değer %40, ön ödeme sadece KDV. Aylık taksit: 500,00 EUR

Koşul: yeni, boş ağırlık: 3.210 kg, azami yük ağırlığı: 8.690 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.000 mm, süspansiyon: diğer, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Loading height, loaded: 590 mm, track-reinforced steel checker plate floor, 2 ramps (2,600 mm long x 900 mm wide), 10 lashing rings (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, gearbox support winch with load and fast mode at the front, 2 fold-down supports at the rear, chassis and superstructure hot-dip galvanized, surcharge for support cradle for milling conveyor €600, also available with mechanical ramps in stock!, -- Subject to typographical errors, mistakes and changes, sample images --, More data at: !, More Details: ! Csdpfsy Izu Sex Aldegt

Koşul: ikinci el, boş ağırlık: 3.450 kg, azami yük ağırlığı: 7.050 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.460 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5, dingil mesafesi: 990 mm, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R17,5, arka lastik boyutu: 235/75 R17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Çelik zemin, hidrolik rampalar, yük sabitleme halkaları, -- baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek fotoğraflar --, Daha fazla bilgi için: !, Ayrıntılı bilgiler: ! Cgsdpoy Ifh Aofx Aldst

Koşul: yeni, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Yükleme yüksekliği yüklü yaklaşık 940 mm, 20 x 6 tonluk sabitleme halkası, 20 x 6 tonluk sabitleme köprüsü, 18 x sabitleme deliği, ortada 7 x dikme yuvası, dış çerçevede 14 x dikme yuvası, 2 çift konteyner kilidi, yaklaşık 1.600 mm yüksekliğinde, takılabilir ön duvar için ek ücret: 1.500 €, uzatılabilir çekme çatalı için ek ücret: 1.000 €, aydınlatmalı 4 x uyarı levhası için ek ücret: 800 €, 8.600 mm, 9.000 mm veya 10.000 mm yükleme yüzeyi uzunluğunda da mevcut!, -- Baskı hatası, yanlışlıklar ve değişiklik hakları saklıdır, örnek resimler --, Daha fazla bilgi için: !, More Details: ! Cedey Hh Enopfx Aldsgt

Koşul: yeni, boş ağırlık: 3.210 kg, azami yük ağırlığı: 8.690 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.000 mm, süspansiyon: diğer, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Loading height, loaded: 590 mm, track-reinforced steel checker plate floor, 2 ramps (2,600 mm long x 900 mm wide), 10 lashing rings (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, gearbox support winch with load and fast mode at the front, 2 fold-down supports at the rear, chassis and superstructure hot-dip galvanized, surcharge for support cradle for milling conveyor €600, also available with mechanical ramps in stock!, -- Subject to typographical errors, mistakes and changes, sample images --, More data at: !, More Details: ! Cgodpfx Asy Hhxboldst

Koşul: ikinci el, güç: 115 kW (156,36 bg), yakıt türü: dizel, renk: sarı, toplam ağırlık: 17.400 kg, kaldırma gücü: 5 kg/m, lastik durumu: 100 yüzde, Üretim yılı: 2015, çalışma saatleri: 1.300 h, makine/araç numarası: 550, Donanım: UVV güvenlik kontrolü, ek farlar, her tahrikli, kabin, klima, palet çatalları, tır çekici bağlantısı, vinç, DEMO - Machine or rental unit Cgjdpfoi Rt Tksx Aldot including radio remote control and loading fork Additional charge for attachments

Koşul: yeni, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 tie-down rings, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, laterally adjustable loading ramps, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 tool boxes, contour marking according to regulations, including axle load indicators. Additional charges for: steel front wall galvanized: €500, hydraulic adjustment of the ramps: €1,000. -- Errors, omissions and changes excepted, sample pictures --. More data at: !, More details: ! Csdpjy Hft Nefx Aldogt

Koşul: ikinci el, azami yük ağırlığı: 46.600 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/1990, yükleme alanı uzunluğu: 10.430 mm, yükleme alanı genişliği: 2.750 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.700 mm, Yük yatağı: 8200 mm, yaklaşık 3250 mm’ye kadar genişletilebilir, katlanabilir genişletmeler, yatak yükseklik: yaklaşık 980 mm, yüksek yatak 1470 mm, arka eğim: 760 mm, her iki tarafta 4’er ağır hizmet tipi yük bağlama halkası, hidrolik ramp (U x G) 2700x1000, arka hidrolik destek, 50 mm çeki halkası, arka kısımda döner lamba yuvası, BPW aks(lar), 3. ve 6. aks yönlendirmeli, tambur fren sistemi, yaprak yaylı süspansiyon, araç reklam ile kaplanmış ve/veya yazılandırılmış olabilir. SI86359 Teklifimiz genellikle yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizden teklif sunmaktan memnuniyet duyarız! Araç reklam ile kaplanmış ve/veya yazılandırılmış olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir. Cgodpfxexyncdo Aldot Bu ürün için size bir finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!