Kullanılmış Orten Orten Et 35 Mit Rollladenaufbau 1,2 To Nl satın al (41.320)

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with balance mechanism ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, 300 mm range * Drawbar extension of 250 mm (total length 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted flat sheet steel bulkhead * Sidewalls made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, retractable between the ramps – storage bracket on the inside of front bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option to install 3 t flip lashing rings every 600 mm * Each front and rear corner with 1 x 6.3 t lashing ring * Various holes in bulkhead and rear crossmember for additional 1.2 t lashing possibilities Kedpfx Ajq Dyvvolijlt * Profifix lashing rail along the longitudinal axis (center) for lashing loads up to LC 3,000 daN ----Ramps: * One-piece mechanical grating access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm overall height) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall * Sidewall color in RAL 9010 pure white * Painting of sidewalls in a different RAL color available at additional cost ----Information: * --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 29/2026

Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Brake System: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs -110 mm wide- with tandem compensation unit ----Drawbar / Flange eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost landing gear at the front * Rear fold-out supports (external) * Lateral underrun protection * Quarter plastic mudguards ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth steel front wall * Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism * Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points * Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised * Drop sides painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * Axles, springs, air tanks, flange towing eye and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Kjdjl Th Hljpfx Aliolt * Available immediately from Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----General Fittings: Kedpfx Alepk D Nceielt * Jost landing gear at front * Fold-out stabilizer legs at rear * Tool box made of galvanized sheet steel approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of the front wall for later installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profile steel sheet, folding down with spring-assisted dropside lift * Steel rear wall, insertable between ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In the corners at the front and rear, 1 x 10 t lashing ring each; various holes for 1.2 t lashing options in the front and rear cross member ----Ramps: * One-piece mechanical grating ramps with spring system for single-person operation approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a shade of black * Sideboard panels painted RAL 9010 pure white * Painting of side walls in other RAL color available for surcharge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: Kljdpfxjrvvfls Aliot * Drum brakes * Electronic braking system (EBS) * Emergency release mechanism for spring-loaded actuators ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalization unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (adjustable by approx. 300 mm) * Drawbar extension by 250 mm (up to 2,250 mm) * 40 mm flange-type towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted on the outside of the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted bulkhead made from smooth sheet metal * Drop sides made of trapezoidal-profile steel sheet, folding down with sideboard spring assist * Rear wall made of steel, can be inserted between the ramps (storage bracket for non-use inside in front of the bulkhead) * Rear stanchions bolted ----Load securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * One 6.3 t lashing ring front and rear, in each corner * Various drilled holes in the front and rear crossmember for 1.2 t lashing points * Profifix lashing rail along the longitudinal axis, centered, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical steel grid loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis including drawbar, bulkhead, loading ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of side panels in an RAL color tone available at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 29/2026

Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front Kodpomi Tmajfx Alislt * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 volt ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic Toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped version * Provision in front of bulkhead for subsequent installation of container locks Kjdsmi Tcqjpfx Alijlt * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the center * Steel rear wall insertable between ramps—bracket for stowing inside in front of bulkhead when not in use * Screw-mounted rear posts ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm * Load securing package: Each front and rear corner with 1 x 10 t UVV lashing ring; each side with 2 x 8 t UVV retractable lashing rings integrated into outer frame; various boreholes in front and end crossmembers for 1.2 t lashing points ----Ramps: * Single-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear flap, folding supports, and access ramps hot-dip galvanized * ---Axles, air tank, flange towing eye, and landing gear painted in black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Üretim yılı: 2014, Koşul: ikinci el, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone at ...). stabau Roller Rails S1-RGSCH 100 / 4 t load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,390.00 net / €2,844.10 gross Load capacity: 4,000 kg Load centre: 1,500 mm Own weight: 689 kg (complete set) Total length: 3,000 mm Total width: 450 mm For exact fork pocket dimensions, please refer to the attached images. We stock a wide range of various attachments, all available immediately from our warehouse! Mr. Herden (Tel. ...) will be happy to assist you. Upon request, we are also happy to provide you with a financing offer. We are official sales and service partners for: - Magni telehandlers - Holp attachments - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the complete Magni product range! Errors and prior sale excepted. Ksdpfx Aloy Nv Enjijlt Internal ID: 141072 = Further information = Unladen weight: 689 kg Suitable for: loading and unloading machines Please contact Marius Herden for further information.

Koşul: ikinci el, kilometre: 13.854 km, güç: 92 kW (125,09 bg), ilk tescil: 05/2012, yakıt türü: elektrikli, boş ağırlık: 2.735 kg, azami yük ağırlığı: 1.265 kg, toplam ağırlık: 4.000 kg, dingil konfigürasyonu: 4x2, yakıt: elektrik, renk: sarı, şoför kabini: diğer, vites türü: otomatik, emisyon sınıfı: hiçbiri, süspansiyon: diğer, toplam uzunluk: 6.783 mm, yükleme alanı uzunluğu: 4.300 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 2.100 mm, Üretim yılı: 2012, inşaat yüksekliği: 2.770 mm, Donanım: ABS, araç içi bilgisayar, immobilizer sistemi, is filtrasyon filtresi, merkezi kilitleme, The vehicle was converted to electric drive at 108,564 km. Total mileage: 122,418 km Manufacturer: Bosa Klsdpet Syuiofx Alist Model: LF150 450V Capacity: 40 kW/h Range: 100 km The used Iveco Daily 35 S11 C30C ELECTRIC was retrofitted with an electric drive system by Orten Electric Trucks in August 2021. Equipped with a Bosa LF150 450V motor and a battery capacity of 40 kW/h, the vehicle offers a range of approximately 100 km. Its total mileage is 122,418 km, with the conversion taking place at 108,564 km. The vehicle features a summer box body with integrated shelving, rear air suspension, and a reversing camera. With an output of 92 kW/125 HP and an automatic transmission, the yellow van is ideal for commercial use. The vehicle measures 6,783 mm in length, 2,177 mm in width, and 2,770 mm in height. With a permissible gross weight of 4,000 kg, it provides ample capacity for various transport requirements. Inspections are possible without prior appointment and a registration service is available. Sale only to business customers (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Koşul: ikinci el, kilometre: 1.415 km, güç: 92 kW (125,09 bg), ilk tescil: 10/2011, yakıt türü: elektrikli, boş ağırlık: 2.735 kg, azami yük ağırlığı: 1.265 kg, toplam ağırlık: 4.000 kg, dingil konfigürasyonu: 4x2, yakıt: elektrik, renk: sarı, şoför kabini: diğer, vites türü: otomatik, emisyon sınıfı: hiçbiri, süspansiyon: diğer, toplam uzunluk: 6.783 mm, yükleme alanı uzunluğu: 4.300 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 2.100 mm, Üretim yılı: 2011, inşaat yüksekliği: 2.770 mm, Donanım: ABS, araç içi bilgisayar, immobilizer sistemi, is filtrasyon filtresi, merkezi kilitleme, The vehicle was converted to electric at 110,485 km. Total mileage: 111,900 km Manufacturer: Bosa Model: LF150 450V Capacity: 40 kWh Kledsugn E Dopfx Aliot Range: 100 km The Iveco Daily 35 S11 C30C electric conversion from 12/2021, carried out by Orten Electric Trucks, is a used electric van with extensive modifications. The conversion was performed at a mileage of 110,485 km, and the vehicle has now covered a total of 111,900 km. Equipped with an electric motor from Bosa, the van delivers 92 kW of power and offers a range of approximately 100 km. The battery capacity is 40 kWh. The yellow van is fitted with a box body from Sommer, integrated shelving units, rear air suspension, and a rearview camera. Additionally, it features an emergency seat and various loading options. With a gross vehicle weight of 4,000 kg and a spacious cargo area, this van is ideally suited for commercial use. The electric drive conversion makes this vehicle an environmentally friendly option in the commercial vehicle sector. Viewings are possible during business hours without appointment. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Koşul: ikinci el, kilometre: 13.408 km, güç: 92 kW (125,09 bg), ilk tescil: 11/2012, yakıt türü: elektrikli, boş ağırlık: 2.735 kg, azami yük ağırlığı: 1.265 kg, toplam ağırlık: 4.000 kg, dingil konfigürasyonu: 4x2, yakıt: elektrik, renk: sarı, şoför kabini: diğer, vites türü: otomatik, emisyon sınıfı: hiçbiri, süspansiyon: diğer, toplam uzunluk: 6.840 mm, yükleme alanı uzunluğu: 4.300 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 2.100 mm, Üretim yılı: 2012, inşaat yüksekliği: 2.850 mm, Donanım: ABS, araç içi bilgisayar, immobilizer sistemi, is filtrasyon filtresi, merkezi kilitleme, The used Iveco Daily 35 S11 C30C electric vehicle was converted to electric drive by Orten Electric Trucks in December 2021. The van has a total mileage of 113,858 km, with the electric conversion carried out at 100,450 km. It is powered by a Bosa LF150 motor with a capacity of 40 kW/h, enabling a range of up to 100 km. The vehicle is equipped with numerous practical features, including a Sommer box body, built-in shelving, rear air suspension, and a reversing camera. An emergency seat is also installed. With its external dimensions of 6,840 mm length, 2,220 mm width, and 2,850 mm height, it offers ample space for commercial use. The cargo area supports various loading options. Kljdov A Akropfx Aliet This vehicle is equipped with an automatic transmission, delivering 92 kW (125 hp). The gross vehicle weight rating is 4,000 kg. The main inspection (MOT) is valid until February 2025. The van was first registered on November 18, 2012, is yellow in color, and has had one previous owner. Viewings are possible Monday through Saturday without prior appointment. Manufacturer: Bosa Model: LF150 450V Capacity: 40 kWh Range: 100 km Conversion to electric drive performed by Orten Electric Trucks in 12/2021. The vehicle is fitted with an emergency seat. Sale only to businesses (agriculture, self-employed professionals, small and large commercial enterprises) or for export. Subject to prior sale and errors.

Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Tow Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange tow eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Landing gear at the front * Fold-out stabilizer legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal steel sheet, central split, folding * Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various holes in the front and end cross-members for 1.2 t lashing options * Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN ----Ramps: * One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm) * Rear approach angle, approx. 860 mm chassis Kodpfx Alsv Eq Evsijlt ----Wheelbase: * Wheelbase 1,140 ----Paintwork: * Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange tow eye and landing gear painted black * Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED lighting Kljdpfx Ajv D Tcbjlist ----General Attachments: * Support winch at the front * Fold-out external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers * Bolted smooth steel bulkhead * Side walls made of trapezoidal steel sheet, split and foldable once in the center * Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing eyes at 600 mm intervals * In each front and rear corner: one 6.3 t lashing ring * Multiple holes for 1.2 t lashing options in front and rear crossmember * Profifix lashing rail along centerline for lashing up to LC 3,000 daN ----Ramps: * One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness) * Rear approach angle approximately 860 mm on chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 30 / 2026

Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm), with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ Tire Pressure Monitoring System * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Manual landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox, right-hand side * Two-step entry at the front left (in direction of travel) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Platform: * Mesh hooks on sides and rear at the central locking mounts, plus two on the front bulkhead Klsdpfx Aljq Euagjiet * Steel platform superstructure, 3-way tipper (continuous side walls, without center stanchions, drop-down with tailgate spring assist, tailboard foldable and swinging via manual central locking) * 4 mm steel bed * Rear ramp mounting rail ----Load Securing: * One lashing point (5 t) in each corner * Four lashing rings (3 t each) recessed on each side into the outer frame ----Ramps: * One pair of aluminum approach ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, folding supports, and rear stanchions hot-dip galvanized * Axles, springs, air tank, flange eye and landing gear painted in black * Side panels painted in a RAL color of your choice (no special or metallic finishes); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. calendar week 28 / 2026

Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalisation unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: Kjdpfsl Thw Iox Alijlt * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox on the right side * Two-step entry step at the front left (in driving direction) * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall * Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading platform, recessed into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Üretim yılı: 2016, Koşul: ikinci el, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). stabau roller tracks S1-RGSCH 100 / 4 t load capacity / year of manufacture: 2016 / in stock & available immediately / excellent condition Price per pair: €2,390.00 net / €2,844.10 gross Load capacity: 4,000 kg Load centre: 1,500 mm Dead weight: 710 kg (complete set) Total length: 3,000 mm Total width: 500 mm For exact pocket dimensions, please refer to the attached images. Klsdey Ikz Iopfx Aliet We have a very large selection of various attachments in stock and available immediately! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for Holp. We are the official sales and service partner for Gierking GMT. We are the official sales and service partner for OilQuick. We are the official sales and service partner for Weber MT. We are the official sales and service partner for Westtech. We are the official sales and service partner for DMS. We are the official sales and service partner for Seppi M. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. Furthermore, with 800 used vehicles, we are among the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Subject to errors and prior sale! Internal ID: 160520 = Further information = New: No Suitable for use with: Loading and unloading machines Please contact Marius Herden for further information.

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic brake system (EBS) * Emergency release device for spring-actuated cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right exterior on the front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Platform: * 50 mm softwood floor * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Drop sidewalls made of trapezoidal profiled steel, foldable with drop-side spring assist * Steel rear wall, retractable between the ramps (storage bracket in front of the front wall when not in use) * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various drill holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: Klsdpfxsxglibj Aliet * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, drive-on ramps, and rear wall * Drop sidewall color in RAL 9010 pure white * Custom sidewall color in any RAL shade available at extra charge ----Information: * --Reinforced and certified body to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. CW 27/2026

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Outward-facing hot-dip galvanized foldable support legs at the rear * Plastic toolbox front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down trapezoidal-profiled steel side walls with drop-side spring assist * Steel rear wall insertable between the ramps, holder for non-use inside in front of the bulkhead * Rear stakes bolted Kledoxglh Repfx Alijt ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various bores in the front and rear crossmember for 1.2 t lashing options ----Ramps: * Single-piece mechanical grid ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear drive-on slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of side walls in a RAL color available at extra charge ----Information: * --Reinforced and certified body to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 27/2026

Koşul: ikinci el, boş ağırlık: 850 kg, azami yük ağırlığı: 2.650 kg, toplam ağırlık: 3.500 kg, ilk tescil: 06/2016, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.150 mm, yükleme alanı yüksekliği: 300 mm, yükleme alanı hacmi: 3,3 m³, renk: diğer, inşaat yüksekliği: 1.000 mm, çalışma genişliği: 2.280 mm, Donanım: ikinci el araç garantisi, Üretici: Brian James Trailers Tip: Yük platformlu Tip 475-5021-35-2-12 Azami toplam ağırlık: 3500 kg Taşıma kapasitesi: 2650 kg Boş ağırlık: 850 kg İç ölçüler: 4950 x 2100 x 300 mm Lastik: 195 50 R12C Tüm yan kapaklar dahil Yükleme alanı altında 2 adet rampa dahil Kalkar hidrolik dahil Muayene geçerli: 02/2026'ya kadar Fiyat, ruhsat (Bölüm I) ve genel işletme izin belgesi dahil Aşağıdaki üreticilere ait çok sayıda römork stoklarımızda mevcuttur: Brenderup, Humbaur, Hapert, Unsinn ve Neptun Kjdpfx Ajx Tu Ntjliolt Talep üzerine ücretsiz geçici plaka temin edilir. Tüm marka römorklar için bakım ve onarım yapıyoruz. Diğer aksesuarlar talep üzerine sağlanabilir. Teknik değişiklikler, fiyat değişiklikleri ve yazım hataları saklıdır. Hatalardan ve baskı hatalarından sorumluluk kabul edilmez. Donanım: parabolik yaprak yay, yüksek brandalı tente, destek tekeri, sıcak daldırma galvaniz, frensiz.

Koşul: yeni, boş ağırlık: 667 kg, azami yük ağırlığı: 2.833 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.200 mm, yükleme alanı genişliği: 1.600 mm, renk: diğer, inşaat yüksekliği: 1.970 mm, çalışma genişliği: 2.120 mm, Manufacturer: Brian James Trailers Model: Construction Machinery Trailer Cargo Digger Plant 2, 543-3216-35-2-12 Permitted Gross Weight: 3500 kg, twin-axle Payload: 2833 kg Unladen Weight: 667 kg Bed Dimensions: 3200 x 1600 mm Tyres: 155/60 R12 Loading Height: 400 mm Ramp Angle: 14 degrees Includes: - Spare wheel - Reinforced, heavy-duty loading platform - Adjustable perforated steel ramps - Excavator bucket rest - Custom specification and modifications on request - Multiple lashing points - Mesh hooks on the underside - V-drawbar, fully hot-dip galvanized - 13-pin plug and reversing lights - Jockey wheel - Robust load platform with reinforced frame design - 18 mm wooden floor with a textured, non-slip surface - Heavy-duty ALKO running gear with sealed wheel bearings - 5-year chassis warranty Price includes vehicle registration papers (vehicle title and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we will provide a free transit license plate. Kledpfx Alswlaaneist We repair trailers of all manufacturers. Further accessories available on request. Technical modifications, price changes and errors excepted. No liability assumed for errors or typographical mistakes. Features: automatic reverse function, rubber suspension axle, loading ramp, jockey wheel, marker lights, hot-dip galvanizing, braked, warranty included, custom specification possible, multiple lashing points, mesh hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug with reversing lights, robust, reinforced frame loading platform, 18 mm wooden floor with non-slip surface, ALKO heavy-duty running gear with sealed wheel bearings, 5-year chassis warranty.

Koşul: ikinci el, boş ağırlık: 180 kg, azami yük ağırlığı: 1.020 kg, toplam ağırlık: 1.200 kg, ilk tescil: 02/1985, bir sonraki muayene (TÜV): 03/2028, yükleme alanı uzunluğu: 1.750 mm, yükleme alanı genişliği: 1.060 mm, yükleme alanı yüksekliği: 380 mm, yükleme alanı hacmi: 0,8 m³, renk: diğer, inşaat yüksekliği: 800 mm, çalışma genişliği: 1.560 mm, Donanım: ikinci el araç garantisi, Manufacturer: Wagner Type: Low-bed timber trailer Permissible total weight: 1,200 kg Payload: 1,020 kg Unladen weight: 180 kg Usable dimensions: 1,750 x 1,060 x 380 mm Kledpfx Asv S Ebfsliet Tyres: 175 R14 inches Loading height: 550 mm Price includes vehicle registration certificate (registration document part II and COC papers) We stock a large number of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Upon request, we provide a free temporary licence plate for vehicle transfer. We repair trailers of all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors reserved. No liability is accepted for errors or typographical mistakes. Features: automatic reverse function, rubber suspension axle, jockey wheel, hot-dip galvanised, braked

Koşul: yeni, boş ağırlık: 895 kg, azami yük ağırlığı: 2.605 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.530 mm, yükleme alanı genişliği: 2.100 mm, yükleme alanı yüksekliği: 170 mm, yükleme alanı hacmi: 2,3 m³, renk: diğer, inşaat yüksekliği: 670 mm, çalışma genişliği: 2.490 mm, Manufacturer: Brian James Trailers Model: Car Transport Trailer A Transporter, 130-5521-35-2-12 Permissible gross weight: 3,500 kg, twin-axle Payload: 2,605 kg Unladen weight: 895 kg Body dimensions: 5,530 x 2,100 x 170 mm Tyres: 155/70 R12 Loading height: 520 mm with 2.00 m loading ramps Kodjwlab Sspfx Alielt - Track panels made of perforated steel offer a grippy surface and allow for load securing via wheel-over lashing. - The extendable perforated steel ramps located under the tracks are easy to use, require no lifting, and ensure a shallow approach angle. - Standard features include LED lighting, kick-down support legs, as well as a front storage box under the deck and anthracite alloy wheels. - Optional equipment includes a tyre rack, petrol canister storage box, and manual-hydraulic or electric tilt function. - Heavy-duty jockey wheel, incl. spare wheel - Available in 5 body colours: yellow, red, anthracite, blue, and black. As a Brian James PREMIUM PARTNER, we have many models in stock. 5-year chassis warranty. Price includes registration certificate (part II and COC documents). We stock a large number of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free transit number plate. We repair trailers from all manufacturers. Further accessories available on request. Technical changes, price adjustments, and errors excepted. No liability for mistakes or typographical errors. Features: automatic reverse, rubber suspension axle, loading ramps, a petrol canister storage box, and manual-hydraulic or electric tilt function. Heavy-duty jockey wheel, marker lights, hot-dip galvanization, braked, incl. warranty. - Track panels made of perforated steel provide a grippy surface and enable secure load fastening via wheel-over lashing. - The extendable perforated steel ramps under the tracks are easy to use, require no lifting, and provide a shallow loading angle. - Standard features include LED lighting, kick-down support legs, and a front storage box under the deck and anthracite alloy wheels. - Optional equipment includes a tyre rack, incl. spare wheel. - Available in 5 body colours: yellow, red, anthracite, blue, and black.

Koşul: yeni, boş ağırlık: 1.150 kg, azami yük ağırlığı: 2.350 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 1.950 mm, yükleme alanı yüksekliği: 300 mm, yükleme alanı hacmi: 2,4 m³, renk: diğer, inşaat yüksekliği: 980 mm, çalışma genişliği: 2.060 mm, Manufacturer: Brian James Trailers Type: Rear Tipper Cargo Tipper Permissible Total Weight: 3,500 kg, triple axle Payload: 2,350 kg Unladen Weight: 1,150 kg Kledpfx Aljw Df Rcoist Internal Dimensions: 4,000 x 2,000 x 300 mm Tyres: 195/60 R12C Loading Height: 680 mm Tipping Angle: 60° - With electric pump - New platform design - Platform with smooth surface - Swinging rear tailgate - Reinforced platform - Robust side panels - Integrated lashing points - Safety support/maintenance brace - Tool box - Spare wheel - Side lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty Price includes vehicle registration certificate (Part II) and Certificate of Conformity (COC). We stock a large range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers of all makes. Additional accessories available on request. Technical specifications, prices, and errors subject to change. No liability for errors or misprints. Features: automatic reversing system, rubber suspension axle, tiltable loading platform, jockey wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, 60° tipping angle, electric pump, new platform design, platform with smooth surface, swinging rear tailgate, reinforced platform, robust side panels, integrated lashing points, safety support/maintenance brace, tool box, spare wheel, side lashing points and net hooks, integrated coupling lock, modern lighting system, 5-year chassis warranty.

Koşul: yeni, boş ağırlık: 525 kg, azami yük ağırlığı: 2.975 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.800 mm, yükleme alanı genişliği: 1.300 mm, renk: diğer, inşaat yüksekliği: 1.950 mm, çalışma genişliği: 1.900 mm, Manufacturer: Brian James Trailers Type: Trailer Chassis Chassis Plant, 560-3813-35-2-12 Permissible total weight: 3,500 kg, twin-axle Payload: 2,975 kg Unladen weight: 525 kg Box dimensions: 3,800 x 1,300 mm Tyres: 195/60 R12C Loading height: 440 mm Features include: reinforced, heavy-duty loading area; 4 adjustable cross beams; 2 rear and 2 front support stands made from hot-dip galvanized steel with holes for increased grip; walk-on side access steps to the platform and walk-on mudguards fitted with non-slip steel tread; multiple lashing points; 195/60 R12C tyres; spare wheel mounted on drawbar; lockable coupling head; 13-pin plug with reversing light; AL-KO heavy-duty running gear; full LED lighting; 5 years chassis warranty. Price includes COC (Certificate of Conformity) documents. We have a wide stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a complimentary transit license plate. We service trailers of all makes. Further accessories available on request. Subject to technical modifications, price changes, and errors. No liability for mistakes or typographical errors. Features: automatic reversing system, rubber suspension axle, support wheel, marker lights, manufactured from hot-dip galvanized steel and perforated for enhanced grip, braked, includes warranty, 4 adjustable cross beams, 2 rear and 2 front support legs, walkable steel tread steps and mudguards, multiple lashing points, 195/60 R12C tyres, spare wheel mounted on drawbar, lockable coupling head, 13-pin plug with reversing lamp, AL-KO heavy-duty running gear, full LED lighting, 5-year chassis warranty. Kljdpfx Alex Iv Iaoist

Koşul: yeni, boş ağırlık: 1.000 kg, azami yük ağırlığı: 2.505 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.310 mm, yükleme alanı yüksekliği: 300 mm, yükleme alanı hacmi: 4,1 m³, renk: diğer, inşaat yüksekliği: 900 mm, çalışma genişliği: 2.430 mm, Manufacturer: Brian James Trailers Model: Car Transport Trailer Cargo Connect 476-6024-35-3-12 Kedpfxewlacvs Aliolt Gross Vehicle Weight (GVW): 3,500 kg, triple axle Payload: 2,505 kg (without side walls) Payload: approx. 2,400 kg (with side walls) Unladen weight: 995 kg (without side walls) Unladen weight: 1,100 kg (with side walls) Internal dimensions: 6,000 x 2,310 x 300 mm Loading width with side walls: 2,310 mm Loading width without side walls: 2,410 mm Tyres: 195/60 R12C Loading height: 600 mm Includes: - Spare wheel, fully assembled - Anti-theft device - Full set of side walls - LED lighting - Colour: Black - Custom configuration and modifications available on request - Multiple lashing points - Net hooks on the underside - Hot-dip galvanised V-drawbar - 13-pin plug and reversing lights - Jockey wheel - Heavy-duty reinforced frame for durable loading area - 18 mm wooden floor with grippy, anti-slip surface - ALKO heavy-duty chassis with sealed wheel bearings - 5-year chassis warranty Price includes registration documents (vehicle registration certificate Part II and COC papers) We stock a wide selection of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers. Free temporary registration plate provided upon request. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors. Features: Automatic reversing, rubber suspension axle, jockey wheel, marker lights, hot-dip galvanised, braked, warranty included, custom equipment and modifications, numerous lashing points, net hooks on the underside, hot-dip galvanised V-drawbar, 13-pin plug and reversing lights, heavy-duty reinforced frame, 18 mm wooden floor with grippy, anti-slip surface, ALKO heavy-duty axle with sealed bearings, 5-year chassis warranty.

Koşul: yeni, boş ağırlık: 855 kg, azami yük ağırlığı: 2.645 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.030 mm, yükleme alanı genişliği: 2.100 mm, yükleme alanı yüksekliği: 170 mm, yükleme alanı hacmi: 2,1 m³, renk: diğer, inşaat yüksekliği: 670 mm, çalışma genişliği: 2.490 mm, Manufacturer: Brian James Trailers Type: Vehicle Transport Trailer, Model A Transporter, 130-5021-35-2-12 Permissible Gross Weight: 3,500 kg, Dual Axle Payload: 2,645 kg Unladen Weight: 855 kg Loading Dimensions: 5,030 x 2,100 x 170 mm Tyres: 155/70 R12 Loading Height: 500 mm, with 2.00 m loading ramps - Runways made of perforated steel provide a non-slip surface and allow for wheel-over-lashing for securing the load. - The extendable perforated steel ramps beneath the tracks are easy to use, requiring no lifting and ensuring a shallow loading angle. - Standard features include LED lighting, kick-down support legs, a front storage box under the deck, and anthracite alloy wheels. - Optional equipment includes a tyre rack, a fuel canister storage box, and manual hydraulic or electric tilting function. - Heavy-duty jockey wheel, including spare wheel - Available in five body colours: Yellow, Red, Anthracite, Blue, and Black. As a Brian James PREMIUM PARTNER, we have many models in stock. 5-year chassis warranty. Price includes vehicle registration documents (Registration Certificate Part II and COC papers). We stock a large number of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free transfer registration plate. Kedpfx Aewlab Ejlijlt We repair trailers from all manufacturers. Further accessories available upon request. Technical changes, price changes, and errors excepted. No liability is accepted for errors or printing mistakes. Reversing automatic, rubber suspension axles, loading ramp, fuel canister storage box, and manual hydraulic or electric tilting function. Heavy-duty jockey wheel, marker lights, hot-dip galvanised, braked, includes warranty. - Runways made of perforated steel provide a non-slip surface and allow load securing via wheel-over-lashing. - The extendable perforated steel ramps below the tracks are simple to use, require no lifting, and provide a shallow loading angle. - Standard features include LED lighting, kick-down support legs, a front storage box under the deck, and anthracite alloy wheels. - Optional equipment includes a tyre rack, including spare wheel. - Available in five body colours: Yellow, Red, Anthracite, Blue, and Black.