Kullanılmış Zettelmeyer Zl 1801 4/1 Schaufel 14 To 1 Hand Thw satın al (62.195)

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes Ncjdpfx Alov D Tbkoaet ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 22/2026

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ----Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing gear at the front * Outward-folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted on left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable; locking measure retracted according to ISO-DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this is not a DIN standard) at a total external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for fitting 3 t recessed lashing rings every 600 mm — mounted 5 x 3 t UVV-certified lashing rings per side * In the front and rear corners, 1 x 6.3 t lashing ring each (front, directly behind the container locks in the timber floor, rear in the end beam) * Multiple holes in front and rear end beams for 1.2 t lashing options ----Ramps: Ncedpfjv D Tbdex Alajt * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (10 t/pair load capacity), suitable for rubber-tyred and tracked vehicles * Rear-accessed storage compartment under the loading area, integrated into the chassis ----Paintwork: * Chassis, drawbar, front wall, underrun protection as well as rear supports galvanized * Axles, air tanks, front landing gear, and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 22/2026

Koşul: yeni, boş ağırlık: 560 kg, azami yük ağırlığı: 2.140 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.140 mm, yükleme alanı yüksekliği: 50 mm, yükleme alanı hacmi: 0,8 m³, renk: diğer, inşaat yüksekliği: 630 mm, çalışma genişliği: 2.190 mm, Manufacturer: Humbaur Model: Vehicle Transport Trailer FTK 274022 Permissible total weight: 2,700 kg Payload: 2,140 kg Njdpfx Alevtf Nxsaoct Unladen weight: 560 kg Platform dimensions: 4,000 x 2,140 x 50 mm Tyres: 10 inch Loading height: 610 mm Ramp angle: 10 degrees - Bolted and galvanized chassis - Galvanized tipping platform - Tipping platform mechanically tiltable via shock absorbers - Steel loading ramps - V-drawbar, hot-dip galvanized - 13-pin plug and reversing lights - Jockey wheel Optional: - Winch with winch post: €440 Price includes vehicle registration certificate (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transit license plate. We repair trailers of all makes. Additional accessories available on request. Subject to technical changes, price changes, and errors. No liability for errors or misprints. Features: Automatic reverse function, rubber suspension axle, loading ramp, tiltable loading platform, jockey wheel, marker lights, galvanized tipping platform, braked, including warranty, bolted and galvanized chassis, tipping platform mechanically tiltable via shock absorbers, steel loading ramps, V-drawbar hot-dip galvanized by immersion, 13-pin plug and reversing lights.

Koşul: yeni, boş ağırlık: 850 kg, azami yük ağırlığı: 1.840 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.31 Gross vehicle weight: 2,700 kg Payload: 1,850 kg Unladen weight: 850 kg Body dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 745 mm Load platform hydraulically tiltable via hand pump Tipping angle rear: 42°, side: 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of single-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg gross vehicle weight, electric pump with manual override - 13-pin plug and reversing lights - Drop sides made from powder-coated, galvanized steel sheet – fully removable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the deck, 800 kg traction each, Dekra certified - Support wheel - Channel for ramps pre-fitted for easy retrofit of aluminum ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: Auto-reverse, rubber suspension axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sheet, braked, with warranty, V-drawbar hot-dip galvanized, chassis and tipping platform hot-dip galvanized, tipping platform made of a single piece of steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross vehicle weight with electric pump/manual override, 13-pin plug and reversing lights, powder-coated removable side panels, rear pendulum tailgate, 6 lashing rings (800 kg each, Dekra certified), ramp channel prepared for easy retrofit of aluminum ramps. Ncsdorvgtvopfx Alast

Koşul: yeni, boş ağırlık: 870 kg, azami yük ağırlığı: 2.130 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load area hydraulically tip-able with hand pump and electric pump Tipping Angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single steel piece Nsdpfx Asrq Ew Tslajct - 4-stage hard-chromed tipping cylinder - Hand pump (electric pump with hand pump from 3,000 kg gross weight) - 13-pin connector and reversing lights - Removable aluminium side panels, 350 mm high - Rear flap pendulum-mounted - 6 lashing rings mounted to the deck, each with 800 kg tensile strength, Dekra certified - Support wheel - Plank compartment pre-fitted for easy retrofit of aluminium planks Price includes vehicle registration certificate (Part II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we can provide a free short-term license plate for transport. We repair trailers of all manufacturers. Further accessories upon request. Technical specifications, prices, and details subject to change and errors excepted. We do not accept liability for errors or misprints. Features: auto-reverse brakes, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, hot-dip galvanized chassis & tipper bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single steel piece, 4-stage hard-chromed tipping cylinder, hand pump (electric pump with hand pump from 3,000 kg gross weight), 13-pin plug and reversing lights, 350 mm high fully removable aluminium side panels, pendulum rear gate, 6 lashing rings mounted to deck (800 kg tensile strength per ring, Dekra certified), plank box pre-installed for easy retrofit of aluminium ramps.

Koşul: yeni, boş ağırlık: 450 kg, azami yük ağırlığı: 1.550 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.030 mm, yükleme alanı genişliği: 1.490 mm, yükleme alanı yüksekliği: 370 mm, yükleme alanı hacmi: 1,8 m³, renk: diğer, inşaat yüksekliği: 880 mm, çalışma genişliği: 1.780 mm, Manufacturer: Hapert Model: Low Loader Alu Azure L-2 Permissible total weight: 2000 kg Payload: 1550 kg Unladen weight: 450 kg Box dimensions: 2530 x 1290 x 370 mm Tires: 185/70 R13 Loading height: 540 mm Standard equipment includes: High side walls made of aluminum with standard Combi Protect Rail on the sides and front Aluminum tailgate with HAPERT locking system Designed side wall hinges for very easy attachment of a load net Loading floor height 52 cm for 2000 kg. (2700 & 3000 kg: +3 cm, and 3500 kg: +4.5 cm) 15 mm multiplex wooden floor with anti-slip surface TÜV-certified load securing system by Hapert: integrated tie-down brackets in the side edge Bolted V-drawbar Fully welded and hot-dip galvanized chassis suitable for up to a maximum of 3500 kg permissible gross weight Robust foldable jockey wheel Many extra options available Price includes vehicle registration document (Part II registration certificate and COC papers) We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun Upon request, we can provide a free temporary transit license plate We repair trailers from all manufacturers Additional accessories available on request Technical changes, price changes and errors excepted. No liability for errors or misprints. Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, robust foldable jockey wheel, marker lights, fully welded and hot-dip galvanized chassis suitable for up to 3500 kg gross weight, braked, includes warranty, high aluminum side walls with standard Combi Protect Rail on sides and front, aluminum tailgate with HAPERT locking system, designed side wall hinges for very easy attachment of a load net, loading floor height 52 cm at 2000 kg (2700 & 3000 kg: +3 cm, and 3500 kg: +4.5 cm), 15 mm multiplex wooden floor with anti-slip surface, TÜV-certified load securing system by Hapert: integrated tie-down brackets in the side edge, bolted V-drawbar, many extra options available. Ncsdotmd Uwspfx Alast

Koşul: yeni, boş ağırlık: 240 kg, azami yük ağırlığı: 510 kg, toplam ağırlık: 750 kg, yükleme alanı uzunluğu: 2.590 mm, yükleme alanı genişliği: 1.430 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 1,5 m³, renk: diğer, inşaat yüksekliği: 1.050 mm, çalışma genişliği: 1.490 mm, Manufacturer: Brenderup Model: Brenderup 4260S UB750 High Loader Steel Permissible gross weight: 750 kg, unbraked Payload: 510 kg Unladen weight: 240 kg Box dimensions: 2590 x 1430 x 350 mm Tyres: 13 inch Loading height: 690 mm All side panels and corner stanchions removable and foldable We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Unsinn and Neptun Upon request, we can provide a free transit license plate. We repair trailers of all makes. Further accessories available upon request. Technical changes, price changes and errors excepted. No liability for errors and misprints. Standard features: - Unbraked with automatic reversing mechanism - Independent suspension (rubber torsion axle) - Centrally mounted jockey wheel as standard - Hot-dip galvanised - Unbraked - Including warranty - Standard fitted lashing eyes integrated in the frame - Side panel height 35 cm - Long drawbar - With removable corner stanchions - 13-pin connector - All side panels fold down and are removable Ncsdpfxeh Hzpuo Alaet - Excellent driving characteristics, ideal for transporting long items - Reversing light and 13-pin connector as standard equipment - User-friendly latches - Perfect floor support due to strong longitudinal beams (commercial grade) - Available with 100 km/h speed certificate from the manufacturer upon request

Koşul: yeni, azami yük ağırlığı: 1.165 kg, toplam ağırlık: 1.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.590 mm, yükleme alanı genişliği: 1.430 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 1,5 m³, renk: diğer, inşaat yüksekliği: 1.050 mm, çalışma genişliği: 1.490 mm, Manufacturer: Brenderup Model: Brenderup 4260A TB, 4260ATB1500 High Loader, Aluminum Permissible total weight: 1,500 kg, tandem axle, braked Payload: 1,165 kg Unladen weight: 335 kg Dimensions of cargo area: 2,590 x 1,430 x 350 mm Tyres: 13" Loading height: 690 mm All side panels and corner stanchions are foldable and removable Nsdpev S D Ttjfx Alaoct We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Unsinn, and Neptun. Upon request, we will provide you with a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability is assumed for errors or typographical mistakes. Equipped with automatic reverse, independent wheel suspension (rubber suspension axle), integrated centering jockey wheel as standard, hot-dip galvanized, braked, includes warranty, standard lashing eyes integrated in the frame, side wall height 35 cm, long drawbar, with removable corner stanchions, 13-pin connector, all side walls foldable and removable, excellent driving characteristics and ideal for transporting long items, reversing light and 13-pin plug are standard equipment, user-friendly locks, perfect floor support due to robust longitudinal beams (commercial-grade construction), available with 100 km/h certificate from the factory upon request.

Koşul: yeni, azami yük ağırlığı: 905 kg, toplam ağırlık: 1.200 kg, yükleme alanı uzunluğu: 2.590 mm, yükleme alanı genişliği: 1.430 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 1,5 m³, renk: diğer, inşaat yüksekliği: 1.050 mm, çalışma genişliği: 1.490 mm, Manufacturer: Brenderup Model: Brenderup 4260B, 4260AB1200 High Loader, Aluminum Permissible Gross Weight: 1,200 kg, braked Payload: 905 kg Unladen Weight: 295 kg Bed Dimensions: 2,590 x 1,430 x 350 mm Tyres: 13-inch Loading Height: 690 mm All side walls and corner stanchions removable and foldable We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Unsinn, and Neptun. On request, we provide a free temporary registration plate for transport. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price changes, and errors excepted. No liability for mistakes or misprints. Noded T Sncopfx Alaect Features: Reverse-drive automatic brake, independent wheel suspension (rubber torsion axle), standard jockey wheel, hot-dip galvanized, braked, incl. warranty, standard tie-down loops integrated in the frame, 35 cm side wall height, long drawbar, detachable corner posts, 13-pin plug, all side walls foldable and removable, excellent driving characteristics and ideal for transporting long goods, reversing lights and 13-pin plug are standard equipment, user-friendly latches, perfect floor support thanks to strong longitudinal beams (commercial version), available with 100 km/h certificate from the factory on request.

Koşul: yeni, boş ağırlık: 988 kg, azami yük ağırlığı: 2.512 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: siyah, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Gross vehicle weight: 3,500 kg Payload: 2,512 kg Unladen weight: 988 kg Internal dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 740 mm Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, lateral: 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Electro-hydraulic pump with manual backup - 13-pin plug and reversing lights - Drop sides made from 350 mm high aluminium, fully removable - Rear flap swing and tip function - 6 lashing rings mounted on deck, tractive force 800 kg each, Dekra certified - Jockey wheel Ncjdjvtf I Uopfx Alaot - Preparation shaft for aluminium ramps for easy retrofit - Black drop sides Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun If required, we can provide a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical and price changes as well as errors reserved. No liability for errors or printing mistakes. Reverse-automatic, rubber spring axle, independent wheel suspension, tiltable load area, jockey wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, electro-hydraulic pump with manual backup, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, rear flap with swing function, 6 lashing rings mounted on deck, tractive force 800 kg each, Dekra certified, shaft for ramps prepared for easy retrofitting of aluminium ramps, black drop sides.

Koşul: yeni, boş ağırlık: 514 kg, azami yük ağırlığı: 1.986 kg, toplam ağırlık: 2.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 2.590 mm, yükleme alanı genişliği: 1.430 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 1,5 m³, renk: diğer, inşaat yüksekliği: 1.010 mm, çalışma genişliği: 1.540 mm, Manufacturer: Brenderup Model: Brenderup Rear Tipper Steel, BT4260STB2500 Gross Vehicle Weight: 2,500 kg, Tandem axle, braked Payload: 1,986 kg Unladen Weight: 514 kg Body Dimensions: 2,590 x 1,430 x 350 mm Ncsdjgu Svcjpfx Alast Tyres: 13 inch Loading Height: 750 mm All sidewalls foldable and removable 13-pin plug Including overrun brake with automatic reversing function Including electric pump Including battery Price includes vehicle registration document (registration certificate part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide free transfer license plates. We repair trailers of all makes. Additional accessories available on request. Technical specifications, prices, and errors are subject to change. No liability is accepted for misprints or errors. Automatic reversing function, rubber-sprung axle, independent wheel suspension. Sand or gravel – a robust single-axle rear tipper. Reinforced steel floor with manual electric tipping device for easy operation. Thanks to the high tipping angle of the loading platform, the trailer is ideal for loading and unloading gravel. Support wheel, marker lights, 35 cm welded hot-dip galvanized steel sidewalls, braked. Including warranty. Brenderup uses galvanized components for optimal rust protection. Robust corner lever fasteners, fully hot-dip galvanized frame, V-drawbar for safety, 8 recessed lashing rings in steel floor, braked, 13-pin plug with reverse light, protected multifunction lights. The perfect companion for contractors to transport and tip earth, wood, and building materials. Folding and removable sides, standard fitted tarpaulin buttons, and removable corner posts. Six strong lashing rings integrated into the steel floor. The trailer can be equipped, for example, with a box extension, high tarpaulin, or other accessories common to the 4000 series. The images are for illustrative purposes only and may show optional equipment.

Koşul: yeni, boş ağırlık: 988 kg, azami yük ağırlığı: 2.512 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Total Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Bed Dimensions: 3140 x 1750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load Platform hydraulically tiltable with manual and electric pump Tipping Angle: Rear 42°, lateral 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized - Steel tipper body made from one piece - 4-stage hard-chrome-plated tipping cylinder - Manual pump, electric pump with manual pump from 3,000 kg permissible total weight - 13-pin plug and reversing lights - Removable aluminium side walls, 350 mm high - Swivelling rear tailgate - 6 lashing rings mounted to the bed, each with 800 kg tensile force, Dekra tested - Support wheel - Channel for ramps prepared for easy retrofitting of aluminium ramps Price includes registration certificate (Part II and COC documents) We have a wide range of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we provide a free temporary registration plate. We repair trailers of all brands. Additional accessories available on request. Technical changes, price changes and errors excepted. No liability for mistakes or typographical errors. Automatic reverse, rubber spring axle, independent wheel suspension, tilting platform, support wheel, marker lights, chassis and tipper platform fully hot-dip galvanized, braked, including warranty, V-drawbar fully hot-dip galvanized, steel tipper platform from one piece, 4-stage hard-chrome-plated tipping cylinder, manual pump, from 3,000 kg electric pump with manual backup, 13-pin plug and reversing lights, removable aluminium side walls 350 mm, rear tailgate swivelling, 6 lashing rings on the trailer bed, tensile force 800 kg per ring, Dekra tested, ramp channel prepared for easy installation of aluminium ramps. Ncodpfx Aorazk Ujlast

Koşul: yeni, boş ağırlık: 907 kg, azami yük ağırlığı: 2.130 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 GVWR: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 750 mm Loading Platform: Hydraulically tiltable with hand pump and electric pump Tipping Angle: Rear 42°, Side 50° With mesh or steel extension sides, 600 mm high, hinged on all four sides - V-drawbar, hot-dip galvanised - Chassis and tipping bridge, hot-dip galvanised by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump, for total weight above 3,000 kg: electric pump with hand pump - 13-pin plug and reversing lights - Aluminium side panels, 350 mm high, fully removable - Rear flap pendulum-mounted - 6 lashing rings fitted to platform floor, lashing force 800 kg each, Dekra tested - Support wheel - Shaft prepared for retrofitting with aluminium ramps Price incl. vehicle registration documents (registration certificate part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free temporary number plate for transfer. We repair trailers of all brands. Further accessories available on request. Technical specifications, prices, and information are subject to change and errors excepted. No liability for errors or misprints. Nedpfsktm Susx Alajct Features: automatic reversing system, rubber torsion axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipping bridge hot-dip galvanised, braked, warranty included, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, for GVWR above 3,000 kg: electric pump with hand pump, 13-pin plug and reversing lights, aluminium dropsides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on platform floor, lashing force 800 kg per ring, Dekra tested, ramp shaft prepared for easy retrofitting with aluminium ramps.

Koşul: yeni, boş ağırlık: 1.100 kg, azami yük ağırlığı: 2.400 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.100 mm, renk: diğer, inşaat yüksekliği: 690 mm, çalışma genişliği: 2.100 mm, Manufacturer: Niewiadow Type: Car transporter model BR3 14A 35A35V Ncedevtf Nrspfx Alast Permissible total weight: 3,500 kg Payload: 2,400 kg Unladen weight: 1,100 kg Bed dimensions: 9,000 x 2,100 mm Tyres: 195/55 R13C Loading height: 690 mm Includes: 2 x loading ramps stowed under the loading platform (steel, 2.5 m long), spare wheel, and 100 km/h road approval. The trailer features a closed aluminium floor in the centre section. Price includes vehicle registration certificate (Part II & COC documents). Large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. If required, we provide a free temporary export license plate. We repair trailers of all makes. Additional accessories available on request. Subject to technical changes, price adjustments, and errors. No liability for misprints or errors. Features: Reverse automatic brake, rubber spring axle, independent wheel suspension, 2 x loading ramps stowed under the bed, jockey wheel, marker lights, fully hot-dip galvanized, braked, includes warranty, steel ramps (2.5 m), spare wheel, 100 km/h approval, central section of trailer with closed aluminium floor.

Koşul: ikinci el, kilometre: 110.093 km, güç: 75 kW (101,97 bg), yakıt türü: dizel, vites türü: mekanik, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.430 mm, ilk tescil: 09/2020, yakıt deposu kapasitesi: 57 l, CO₂ emisyonları: 202 g/km, emisyon sınıfı: Euro 6, renk: beyaz, koltuk sayısı: 3, önceki sahip sayısı: 4, Üretim yılı: 2020, Donanım: ABS, araç içi bilgisayar, elektronik denge programı (ESP), immobilizer sistemi, klima, merkezi kilitleme, sürgülü kapı, General Information Number of doors: 4 Model range: Aug. 2019 - Oct. 2021 Cab type: single Technical Information Torque: 270 Nm Number of cylinders: 4 Engine capacity: 1,750 cc Transmission: 6-speed manual gearbox Dimensions Length/Height: L3H1 Dimensions (L x W x H): 537 x 193 x 199 cm Nsdpfeydp S Njx Alaect Weights Unladen weight: 1,845 kg Payload: 656 kg gross vehicle weight (GVW): 2,501 kg Interior Interior color: black Consumption Average fuel consumption: 6.6 l/100km Urban fuel consumption: 7.9 l/100km Extra-urban fuel consumption: 5.9 l/100km Maintenance, History and Condition Booklets: Available (dealer maintained) APK (MOT/Technical Inspection): New inspection upon delivery Number of keys: 2 (2 remote controls) Financial Information Please inquire about finance leasing options Product Safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional Options and Accessories = - Automatic dipped headlights - Passenger bench seat - Bluetooth hands-free kit - Third brake light - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Wooden interior lining - Height-adjustable driver's seat - Tailgate - Load area - Radio - Rain sensor - Tyre pressure monitoring system - Reversing camera - Right sliding side door - Immobiliser - Bluetooth phone connectivity - Partition wall

Koşul: mükemmel (kullanılmış), kilometre: 345.544 km, güç: 105 kW (142,76 bg), ilk tescil: 01/2021, yakıt türü: dizel, yakıt: dizel, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, toplam uzunluk: 7.300 mm, toplam genişlik: 2.200 mm, Üretim yılı: 2021, Donanım: ABS, elektrikli cam sistemi, elektronik denge programı (ESP), hava yastığı, hidrolik direksiyon, hız sabitleyici, klima, merkezi kilitleme, navigasyon sistemi, = Diğer seçenekler ve aksesuarlar = - Yolcu hava yastığı - Sürücü hava yastığı - Direksiyondan radyo/kumanda kontrolü - Üçüncü fren lambası - Ön elektrikli camlar - Klima kontrolü - Yükseklik ayarlanabilir direksiyon - Ön orta kol dayama - Çok fonksiyonlu direksiyon - Radyo/CD çalar - Elektrikli ayarlanabilir yan aynalar - Uzaktan kumandalı merkezi kilit = Diğer bilgiler = Silindir sayısı: 4 Motor hacmi: 2.143 cc Boş ağırlık: 2.879 kg Muayene (APK): 01.2027'ye kadar geçerli Ncodpfsyu N Hzsx Alajt Teknik durum: Çok iyi Görsel durum: Çok iyi Hasar: Yok Anahtar sayısı: 2 Plaka: VJF-62-H

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front Nodox Ipapopfx Alasct * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm Nodpfx Aljx Ipbajasct ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: Ncedpfx Aloq Dyvysast * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Nedpspk Dv Refx Alasct * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: ikinci el, Üretim yılı: 2015, çalışma saatleri: 4.906 h, Donanım: her tahrikli, * Caterpillar TH514C teleskopik yükleyici * Hidrolik hızlı değişim sistemi * 4x4x4 yengeç direksiyon * Kepçe, döner çatal * Tartı donanımı * Çatal kolları * Michelin lastikler neredeyse yeni * Çalışma ağırlığı: 11.745 kg * Çalışma saati: 4.906 * Tam borulama * Klima * Üretim yılı: 2020 * Mükemmel durumda * Hemen kullanıma hazır Nedjxzwu Ejpfx Alaoct * Çalışma saatleri: Pzt-Cum 07:30-12:00, 13:00-18:00; Cumartesi 07:30-17:00 * E-posta: . * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber İngilizce: Mladen Ilic

Koşul: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized Ncsdpfx Aljpk D Dqjaot ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic braking system (EBS) Nsdpfx Alsndpn Soaect * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flanged Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required) * LED lighting system * 15-pin electrical connector ----General Attachments: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provisions for subsequent installation of 20" container locks at the front and rear * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist * Bolted hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front and rear walls * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: Ncsdpfol Th Eyex Alast * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf on the A7

Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Njdpfsl Th Dmjx Alasct * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7