Kullanılmış Fliegl 3 Axle Container Trailer. satın al (53.798)

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33801012811, boş ağırlık: 6.350 kg, azami yük ağırlığı: 28.650 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", lastik durumu: 100 yüzde, renk: gümüş, Multiple units available Chassis – Semi-trailer for freight forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushroom anchors recessed in the outer upper frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection, quarter fenders in front of the 1st axle and behind each axle, with anti-spray mudflaps behind each axle, 1 spare wheel holder for 1 spare wheel, with wheel fastening kit, 2 plastic toolboxes (W=600 / H=425 / D=460 mm), lockable, container locking system, 4 pairs of twistlocks recessed in the floor for 2 x 20-foot or 1 x 40-foot containers, front position as fold-down recessed lock, 10 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm, 10 stake pockets centrally recessed in the floor (70 x 40 mm), 2 transverse lashing/stake rails recessed across the width of the floor up to the outer frame (usable internal width between outer stanchions approx. 2170 mm), approx. 100 mm high, equipped with 20 mm round bar rails (top and bottom), vertical clearance approx. 60 mm (between round bars), bottom closed off with angle iron – half open downwards. For lashing and inserting stakes (80 x 80 mm). Arrangement: Positions 2 and 4 as per Fliegl data sheet, 20 plug-in stanchions, hot-dip galvanised, storage compartment for aluminium ramps, ramps can be inserted from the rear, 3 pairs of foldable lashing rings (10t) integrated in the outer frame (1 x front wall, 2 x at rear). Nwedpfx Agsza Agrs Dsi Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, including forced lowering and start assist, operated by "braking 3x", axle lift below recommended driving height, therefore no guarantee for tyre damage Brake System: 2-line pneumatic brake system, color coded airlines for easy servicing, spring-loaded parking brake, 2 non-swappable coupling heads at the front, no connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable, with raise & lower valve, 2 ride heights switchable via hand button, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm, ride height varies with lift axle, raising the lift axle increases loading/overall height by 50 mm, vehicle stability control system Wheels & Tires: 435/50 R19.5, manufacturer at OEM’s choice, steel rims Electrics: 24 volt system, multi-chamber tail lights, side yellow LED lighting, 2 white marker lights (front, LED), 2 white/red lane marker lights (rear), 2 x 7-pin and 1 x 15-pin non-swappable sockets at front, LED work lights on sides (1 left, 1 right), 2 additional LED work lights (rear), 1 rotating beacon with bracket, operated via parking light, 2 pairs of LED illuminated and extendable warning panels (to 4000 mm), additional 7-pin socket on rear underrun Floor: approx. 30 mm phenolic wooden floor panels, mounted on longitudinal subframes for high point load capacity, suitable for forklift axle loads up to max. 7100 kg Front bulkhead / Corner posts: 25 mm aluminium hollow section, 1350 mm high, corner posts steel, high-volume version, front bulkhead internally lined with 1250 mm high phenolic panel, "Crash Blocker", with 140 mm high steel impact guard inside at the bottom, internal storage compar

Durum: ikinci el, Fonksiyonellik: sınırlı işlevsellik, boş ağırlık: 6.575 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 07/2011, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.300 mm, toplam uzunluk: 13.650 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 30 yüzde, dingil mesafesi: 1.360 mm, Üretim yılı: 2011, Donanım: ABS, Kullanılmış açık yarı römork Uzun demirler için çentikli çelik ön duvar Taban çelik profillerle güçlendirilmiş Nwodpfx Agjy Ercbe Dji Yanlarda dikme cepleri Takma dikmeler için depo kutusu

Durum: yeni, boş ağırlık: 1.365 kg, azami yük ağırlığı: 2.145 kg, toplam ağırlık: 3.500 kg, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.100 mm, yükleme alanı yüksekliği: 1.890 mm, Üretim yılı: 2024, ANHÄNGERWIRTZ – Your online pick-up market for new trailers offers top brand models! Over 850 new trailers in stock Over 130 used trailers always available from trailershop Non-binding example offer: Affordable and direct from our showroom while stocks last! BJT RACE TRANSPORTER 7 397-5521-35-3-10-B 550x210x189cm TRIDEM ALLOY WHEELS 3500kg Car Transporter Race 7 – 550x210x189cm, 3500kg Tridem low-loader with AL-KO Bradley V-type chassis, fitted with 10" tyres on alloy wheels. Enclosed black polybody, double & service side doors, Complight perforated aluminium floor rails, drivable rear ramp with electric folding & tilting deck, electric winch, central floor storage boxes with lid, LED interior lighting, reversing and finishing lights, 4 red tie-down straps, coupling lock, aluminium spare wheel with cover, jockey wheel... Unladen weight approx. 1355kg Payload approx. 2145kg Don’t hesitate – available while stocks last! Sales & Order Hotline Opening times: Mon-Fri: 08:00 to 12:30 & 14:00 to 18:00 Or shop around the clock online via trailershop Content and images subject to copyright – Logos trademarked 05/26 Nwedoy Sb N Djpfx Ag Dji Illustration and all details non-binding Item no.: 397-5521-35-3-10-B

Durum: ikinci el, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 700 mm, FLIEGL yan camlı ve 3 akslı dorse Yararlı yük: 28.410 kg Nwodpfx Agswgghno Dei Tip: SDS350 Fren: Disk fren Aks: BPW + Havalı süspansiyon 2x destek ayağı (JOST) Uzunluk: 13,60 m Genişlik: 2,40 m Yükseklik: 0,70 m Finansman/kiralama alanında da partnerlerimizle size memnuniyetle destek oluruz. Tüm bilgiler garanti edilmez. Hata ve ara satış hakkı saklıdır.

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Nodori Hihepfx Ag Dowi Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly tapered with 'Load-Lock profile' for attaching tie-down straps 24 t 2-speed landing gear, single-sided operation Aluminum side underrun protection Galvanized steel rear underrun guard Quarter shell mudguards in front of and behind the axle assembly With anti-spray mud flaps according to EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fastener kit Axles & Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser alignment" reduces tire wear and fuel consumption 1st axle with automatic lift, additionally electronically controllable from the truck cab Includes forced lowering and start aid, no truck installation required Brake System 2-line compressed air brake system Spring-loaded parking brake Wabco EBS electronic braking system with EBS socket at the front, without connection cable With lift & lower valve plus auto-reset function Vehicle stability control system Axle load detection via EBS can-bus signal, output to display Wheels and Tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at the front 2 white/red track marker lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable-proof sockets at the front, no connection cable 2 additional LED work lights at the rear, switched via reverse gear Floor Approx. 30 mm phenolic plywood floor, on longitudinal cross-members for high point load resistance, suitable for forklift axle loads up to 7100 kg at the front wall Stakes 5 rows of aluminum V-stakes 2 pairs of Vario steel stakes, in combination with Vario beams for forward and backward load securing; the aluminum stakes are omitted in the area of the steel stakes Rear portal doors, double-leaf with 2 internal rod locks each Tarpaulin with welded horizontal and vertical straps Unladen weight: 5,960 kg Offer and images non-binding

Durum: yeni, azami yük ağırlığı: 23.920 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, YENİ ARAÇ Fliegl 3 dingilli alçak şasi treyler Tip DTS 300, sıcak daldırma galvanizli Njdexb Nmyepfx Ag Djwi Toplam ağırlık 24.000 kg / 30.000 kg Yük kapasitesi 17.920 kg / 23.920 kg Boş ağırlık 6.080 kg Toplam uzunluk 10.900 mm Yükleme uzunluğu 8.680 mm Yatak alanı 6.500 mm, 900 mm yaklaşım rampası dahil Parabolik süspansiyon 2.800 mm uzunluğunda rampalar, hidrolik kumandalı 3.000 mm'ye kadar genişletilebilir, uyarı levhaları ve döner flaşörle birlikte 5,0 ve 10,0 tonluk sabitleme noktalarıyla büyük bağlama paketi 5 çift kazık cebi 40 mm çekme halkası Ek olarak nakliye/hazırlama, Wiesmoor stok yerinden 1.280,00 €/net Kiralama teklifi: Vade 48 ay, kalan değer %40, ön ödeme sadece KDV. Aylık taksit: 500,00 EUR

Durum: yeni, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam genişlik: 2.550 mm, Vehicle is from ongoing production – available in approx. 2 weeks Vehicle / Body: Tipper body Gross weight: 35,000 kg / 39,000 kg Unladen weight: 5,500 kg!!! Payload: 29,500 kg / 33,500 kg Overall length: 8,600 mm Volume: 25 cbm Further information: - Overall height approx. 3,160 mm - Internal width approx. 2,350 mm - Fifth wheel height approx. 1,200 mm Chassis for tipping semi-trailer: - Fine-grain steel welded construction, basic lightweight design - 1 central landing leg - Folding underrun protection - Underrun protection with 'spring assistance' for easier operation - Half-shell mudguards - Integrated 'mudguard bracket', stone-repellent surface - Antispray mudflaps only on rearmost axle - 2 towing eyes at the rear Axles and Suspension: - SAF disc brake axles with 430 mm disc diameter - 'Axles/chassis laser alignment' to reduce tire wear and fuel consumption - Axles in off-road specification - Air suspension - Air spring pressure gauge mounted at front on curved chassis - 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting aid, without truck installation (starting aid operates up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Braking System: - 2-line compressed air brake system, color-coded piping for easy servicing Nwodpevhyf Refx Ag Dei - Spring-loaded parking brake - 2 fail-safe coupling heads at the front, without connecting lines - 24-volt EBS electronic braking system with EBS socket at front, no connecting cable - With lift and lower valve - Vehicle stability control system - Automatic tipper lowering with shut-off valve Wheels and Tires: - 6 x 385/65 R22.5", European brand, manufacturer’s choice Electrics: - 24-volt, multi-chamber lights in LED, amber side LED lighting, license plate LED lighting (Note: certain towing vehicles may display diagnostic errors despite proper function) - Amber side LED lighting linked with the indicator, 'flashing side marker lamps' - Premium LED side marker lamps, each with 20 LED diodes - 2 white front position lamps (LED) included - 2 rear white/red lane marker lamps (LED) included - 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cables - Side LED work lights, both sides (switched via reverse light) - 2 additional LED work lights recessed at the rear Hydraulics: - High-pressure cylinder, max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm - Brand: Hyva - Hydraulic operation via truck PTO - Hydraulic connection with hose and vehicle screw connector NW = 54 mm with large wing nut Body: HARDOX steel round body in 'Stone Master Design' made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Integrated access at the front wall. - Greenline – conical and aerodynamic body shape - Shovel and broom holder on external front wall - 'Membrane' rear wall - Rear wall as pendulum tailgate with 'double-joint hinge', external mounting with double hook locking. 2 clamping screws with toggle fasteners at lower sides - Rear wall with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous 4 mm side walls, 4/5 mm floor, wear and weight-optimized design - Fliegl S.T.E.P. – swiveling front standing platform with foldable access ladder for side entry on front-left

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, From ongoing production Total weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: 8,670mm total, 2,520mm gooseneck, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information: - Steel welded construction - Turntable with robust slewing ring - Folding rear support - Chocks with holder - Aluminium side underrun protection Nwodpfxeuytx So Ag Dsi - Full-width rear mudflap (not in combination with forklift bracket) - Half-shell mudguards on 1st axle with anti-spray mudflaps - Anti-spray mudflaps behind 2nd and 3rd axles - Plastic toolbox - Extendable width to 3,000mm - Central storage compartment for wooden planks on the loading area - 70mm wooden planks for extension to 3,000mm - Lashing eyes low bed - 1 pair of lashing cutouts recessed in the front longitudinal beam on the gooseneck, each rated at 10 tons - 4 pairs of lashing holes in the external frame of the gooseneck, each rated at 5 tons (for attaching lashing straps) - 7 pairs of lashing mushrooms inserted on top and side of the external frame, each rated at 10 tons - 1x on the gooseneck, 6x in the low bed - Pair of ring lashing eyes recessed in the external frame, each rated at 5 tons (convertible to stake pockets) - Additional pair of folding lashing eyes, each rated at 10 tons - 1x on the gooseneck - 1x recessed in the floor behind the last axle Towing device/trailer turntable: - Drawbar with certified 40mm eye - Drawbar height adjustable by spring Axles & suspension: - Drum brake axles, manufacturer’s choice - "Laser-measured axles/chassis": reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels & tyres: - 235/75 R 17.5'' - Manufacturer’s choice - Twin steel rims, factory silver Braking system: - Two-line air braking system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at the front, with connecting lines to towing vehicle - 24V ABS and ALB, with ABS plug at the front, incl. cable Electrics: - 24V, multi-chamber lights, yellow LED side lighting - 2 white position lights at the front - 2 white/red clearance marker lights at the rear - 2x 7-pin non-interchangeable plugs at the front, with cable - LED beacon with bracket, operated via parking lights (removable beacon) - Pair of warning boards double LED-lit and extendable to 3,000mm Floor: - Gooseneck front with steel / checker plate covering - Storage compartment recessed in the transition slope to the gooseneck - Then approx. 70mm softwood floor, with steel/checker plate covering in wheel arch areas - Rear bevel with 70mm softwood floor - Low bed area including rear bevel 6,500mm Access ramps: - Steel ramps, 2,800mm long, 750mm wide, laterally adjustable - Additional ramp securing, foldable below (prevents lateral shifting of the ramps; not compatible with hydraulic ramp shifting) - Wood covered (tip portion with steel/checker plate) - Hydraulic via tractor PTO with throttle, operation at left front side - Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Painting: - Frame hot-dip galvanized incl. passivation - Ramps hot-dip galvanized Plus delivery/preparation from stockyard 26639 Wiesmoor: €1,280.00 net

Durum: yeni, azami yük ağırlığı: 23.890 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Vehicle from ongoing production NEW VEHICLE Fliegl 3-axle low loader, Type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Nodsk N Adkopfx Ag Dswi Overall length: 10,900 mm Loading length: 8,680 mm Load bed: 6,500 mm including 900 mm approach ramp Loading height: 860 mm Air suspension with lift/lower valve Long ramps 2,800 mm, hydraulically operated Width extensions to 3,000 mm with warning panels and rotating beacon Large lashing package with 5.0 t and 10.0 t lashing points 5 pairs of stake pockets Drawbar eye: 40 mm Plus pre-delivery / provision ex-stock Wiesmoor €1,280 net Lease-purchase offer: Term 48 months, residual value 40%, down payment only the VAT Monthly rate: EUR 609.00

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle completely hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 6,500 mm recessed deck incl. rear bevel / 2,170 mm step deck Width: 2,520 mm Loading height: 860 mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Hire-purchase offer: Term 48 months, down payment VAT only, residual value 40% Monthly rate: €569.00 Steel welded construction Turntable with heavy-duty ball bearing ring Foldable rear support Chocks with bracket Aluminum side underrun protection Full-width rear spray flaps (not in combination with forklift holder) Half-shell mudguards on the 1st axle with anti-spray flaps Anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width up to 3,000 mm (not in the rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Tiedown points low-loader 1 pair of tiedown recesses in the main frame at the front of the step deck, each 10 t 4 pairs of lashing holes in the outer frame of the step deck, each 5 t (for lashing strap hooks) 7 pairs of lashing pins recessed in and on the side of the outer frame, each 10 t 1 at the front on the step deck Nwjdov D T R Eepfx Ag Dei 6 in the low-bed recessed deck First lashing point 250 mm from the front and the last max. 250 mm from the rear, spacing of lashing points not greater than 1,100 mm 5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional foldable lashing eyes, each 10 t 1 on the step deck (protruding) 1 recessed in the floor behind the last axle Drawbar/trailer running gear Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Laser-measured axles/running gear" for reduced tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235 / 75 R 17.5" tires, manufacturer’s choice Twinned steel rims, factory silver Braking system Two-line air brake system Spring-loaded parking brake Vehicle stability system Axle load detection via EBS CAN bus signal, for display in driver's cab—truck must be suitably equipped, no installation on truck (not a calibrated scale) 2 foolproof coupling heads at front, with connecting lines to tractor unit 24 V EBS, electronic braking system with EBS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin foolproof connectors at front, with connecting cable 1 LED beacon with bracket, controlled via position light (removable beacon) 2 pairs of warning panels, double LED illuminated, extendable to 3,000 mm Floor Front step deck with steel/chequer plate surface Storage compartment recessed in transition to step deck Then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide,

Durum: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision from stock at 26639 Wiesmoor, €1,280.00 / net Nwodpfx Asynvrwsg Dji Low-bed trailer chassis Steel welded construction Turntable with heavy-duty ball race Foldable rear support 2 wheel chocks with holders Full-width rear mudflap (not with forklift mounting) 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with cover, not in rear taper) Lashing points low-loader: 1 pair tiedown recesses in the longitudinal beam, front, recessed in the cranking, each 10t 7 pairs of lashing mushroom points, fitted on top and side of the outer frame, each 10t: 1x front on cranking 5x in the lowered bed 1x in rear taper 12 pairs of lashing holes in the outer frame, each 5t (for ratchet strap hooks): 5x cranking, 6x lowered bed, 1x rear taper Drawbar arrangement for turntable trailer: Drawbar with certified 40mm towing eye Drawbar height adjustable via spring Axles and suspension: Drum brake axles, manufacturer’s choice Laser-aligned axle/chassis: reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensator) Wheels and tyres: 235/75 R17.5” (manufacturer’s choice) Steel twin rims, factory silver Braking system: 2-line air brake system Spring-loaded parking brake 2 fail-safe coupling heads at front, with connecting lines to the truck, connecting lines approx. 60cm extended without ABS, with mechanical ALB, thus max. 60 km/h approval Electrics: 12 volt, multi-chamber lights, without side yellow LED lighting, with side reflectors 2 white position lights front 2 white/red contour marker lights rear 1x 7-pin 12V plug at front, with connecting cable, approx. 60cm extended 1 LED beacon with bracket, controlled via sidelight (removable) 2 pairs of illuminated warning boards, extendable to 3,000mm Floor: Front cranking with steel/chequer plate covering Storage box recessed in the transition to cranking Then approx. 70mm softwood floor, over wheel arches with steel/chequer plate covering Rear taper with 70mm softwood floor Low-bed area incl. rear taper 5900mm Access ramps: Steel ramps approx. 3000mm long, 750mm wide, laterally adjustable Wooden planked (tip area with steel/chequer plate) Hydraulic via tractor auxiliary drive with throttle, operated on LH side Hydraulic connection with SVK plug NW 10/3, including hose Operating instructions: With 10,000kg axle load, special permit required; only indivisible load possible! The stated gross vehicle weight is technically feasible; depending on the load, the GVW may not be achievable due to permitted axle/support/saddle loads. (Poor driving and tracking behaviour may result from incorrect load distribution) Country of registration / Plates: Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle LoF (Registration in Switzerland max. 40 km/h possible) Prepared for two-line registration plate holder Without contour markings / reflective strips according to ECE R 048 Paint finish: Frame hot-dip galvanised incl. passivation “15-year warranty against thr

Durum: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information: Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Njdpfx Ajut Idnjg Djwi Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Durum: yeni, azami yük ağırlığı: 23.340 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, frame and chassis hot-dip galvanized Nsdjllwhnopfx Ag Dewi Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach ramp Loading height: 900 mm Comprehensive lashing package Drawbar 40 mm Tyres 235 / 75 R 17.5" dual wheels Without ABS, approval max. 60 km/h Electrical system 12 Volt, LED beacon Ramps with spring assist, ramp length 2,800 mm Vehicle from current production – lead time approx. 14 days. Plus freight/preparation from Wiesmoor depot €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Hire purchase offer: 48-month term, residual value 40%, down payment only VAT. Monthly rate: €599.00

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm, gooseneck 2,170mm, loading deck 6,500mm Width: 2,520mm Loading height: 860mm Additional information plus pre-carriage / delivery ex-stock 26639 Wiesmoor €1,280.00 net Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball race Rear supports foldable 2 wheel chocks with holders Aluminium side impact protection Full-width rear spray flap (not in conjunction with forklift bracket) Quarter shell mudguards in front of 1st axle Anti-spray mud flaps behind 2nd and 3rd axle 1 lockable plastic toolbox, w=600mm / h=425mm / d=460mm Extendable outriggers for widening to 3,000mm (not in rear bevel) (Track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550mm) Timber storage compartment centrally located on the loading area 70mm timber planks for extension to 3,000mm Lashing eyes low loader 1 pair of front lashing recesses in main beam at gooseneck, each 10t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5t (for attaching ratchet straps) 7 pairs of lashing points (studs) inset at top and side of outer frame, each 10t 1x at front on gooseneck 6x in well deck First lashing eye 250mm from front, last max. 250mm from rear, distance between lashing eyes max. 1,100mm 5 pairs of recessed ring lashing eyes in outer frame, each 5t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10t 1x on gooseneck (protruding) 1x recessed in floor behind last axle Towing gear Turntable trailer Drawbar with certified 40mm towing eye Drawbar height adjustment by spring Axles and suspension BPW drum braked axles "Chassis/axle alignment with laser" to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (walking beam equalizer) Wheels and tyres 235/75 R 17.5" Manufacturer's choice Steel rims twin configuration, factory silver Nsdjwlmr Rjpfx Ag Djwi Brake system 2-line air brake system Spring-loaded parking brake 2 fail-safe couplings at front, connection lines to tractor unit 24V ABS and ALB, ABS socket at front, with connection cable Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin fail-safe plugs at front, with connecting cable 1 LED beacon with bracket, controlled via sidelights (beacon removable) 2 pairs of warning panels, each LED illuminated and extendable to 3,000mm Floor Gooseneck clad with steel/chequer plate Storage box inset in transition to gooseneck Subsequent area fitted with approx. 70mm softwood floor, in wheel arch areas with steel/chequer plate Rear incline with 70mm softwood flooring Lowbed area incl. rear incline 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Additional lower ramp locks folding (to prevent lateral slipping of ramps, not in conjunction with hydraulic side ramp shift) Planked with timber (ends with steel/chequer plates) With spring assist Operating instructions For a 10,000kg axle load, a special permit is required, only indivisible loads permitted! For application of a sp...

Durum: ikinci el, makine/araç numarası: WFDFLT33901007921, boş ağırlık: 9.000 kg, azami yük ağırlığı: 26.000 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2018, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 15.150 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 15.350 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", renk: siyah, Attention, the images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Nodpfxoy Slp Is Ag Dowi Permissible/Technical Gross Weight: 35,000 / 39,000 kg Permissible/Technical Payload approx.: 26,000 / 30,000 kg Permissible/Technical Aggregate Load: 24,000 / 27,000 kg Permissible/Technical Fifth Wheel Load: 11,000 / 12,000 kg Unladen Weight approx.: 9,000 kg +/- construction tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height low bed approx.: 900 mm Fifth wheel height approx.: 1,150 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis / Semi-Trailer - Forwarder Specification Fine-grain steel welded construction, semi-trailer plate with replaceable 2" king pin Lashing rings recessed in the outer frame, each rated 2.5 t 24 t two-speed landing gear, operated from one side, with straight base, without stroke compensation Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of the 1st axle and behind each axle With anti-spray mud flaps behind each axle Rear impact protection Plastic toolbox with drawer and removable shelf, Width = 650 mm / Height = 520 mm / Depth = 670 mm Document box, located on the front bulkhead Telescopic Extension Central tube frame with precisely welded, overlapping telescopic frame sections. Extendable by max. 1,500 mm and lockable after approx. 1,500 mm, outer frame sections approx. 1,500 mm long for hooking into the outer frame when telescoped Locking mechanism with mechanical bolt lock Axles & Suspension SAF drum brake axles Air suspension Braking System Two-line compressed air braking system Spring-loaded parking brake 2 fool-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without wiring Warning: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift and lower valve Wheels and Tyres 235 / 75 R 17.5 Steel wheels in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED marker lights 2 white position lights at the front 2 white/red marker lights at rear 2 x 7-pin fool-proof sockets at the front, without connecting cables Rotating beacon with bracket, switchable via parking light (beacon removable) Floor Phenolic plywood approx. 30 mm thick, suitable for high point loads, forklift axle load up to max. 7,100 kg Where necessary, wheel arch areas fitted with steel/chequer plate covering Front Bulkhead / Front Corner Stanchions 25 mm aluminium hollow section, 1,950 mm high, steel corner stanchions in full-height design Approval / Signage DEKRA inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, side white and rear red Attention, the images are archive photos! The vehicle may currently be in use!

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33903000364, boş ağırlık: 6.120 kg, azami yük ağırlığı: 28.880 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2022, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", renk: gümüş, Attention, the photos shown are archive images! The vehicle may currently be in use! Weights and Dimensions: Permissible / Technical gross weight: 35,000 / 39,000 kg Permissible / Technical payload approx.: 28,880 / 32,880 kg Permissible / Technical aggregate load: 24,000 / 27,000 kg Permissible / Technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (base version) approx.: 6,120 kg +/- production tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, Fifth-Wheel Haulage: Fine-grained steel welded construction, fifth-wheel plate with replaceable 2" king pin Low bed telescopic extension by approx. 1,500 mm, lockable every 500 mm Slightly sloped new version of outer frame with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for lashing strap attachment, integrated into the cross member below the outer frame 24 t 2-speed landing gear, single side operation, straight base, without load equalizer Clear support foot corner or free rear swing radius approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/ stake pockets recessed transversely in the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, vertical distance approx. 60 mm. Bottom with angle plate as stopper, half open downwards. For lashing and inserting 80 x 80 mm stakes (3 pairs in the neck, 6 pairs in the low bed area). 3 pairs of stake pockets integrated in the outer frame, approx. 72 x 42 mm internal measurement Axles & Suspension: Drum brake axles per manufacturer's choice "Laser-measured axles/chassis" for reduced tire wear and fuel consumption Air suspension Brake System: 2-line compressed air brake system Color-coded lines for easy servicing Spring-type parking brake 2 foolproof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting lead Note: The trailer may only be towed by tractor units that ensure effective ABS operation! With raise & lower valve Vehicle driving stability system Wheels and Tires: 235/75 R17.5, brand at manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side-mounted yellow LED lighting (inset) 2 white front position lights 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at front, without connecting lead 1 additional LED work light at the rear, controlled via reversing light Floor: Phenolic plywood, approx. 30 mm thick, high point load capacity for forklift axle load up to max. 5,600 kg Front wall / front corner posts: 25 mm aluminum hollow section, 1,350 mm high Country of Registration / Plates: Germany Inspection and certificate in Bosnia 24/7 Service hotline Prepared for single-line license plate holder Contour marking with ECE R 048 reflective tape, white on the sides and red at the rear Warning plate as per ECE - 70 Paintwork: Frame: hot-dip galvanized incl. passivation Nsdey Slhqopfx Ag Djwi "15-year anti-corrosion warranty against rust-through" Front corner posts: hot-dip galvanized Front wall: aluminum

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2019, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, dingil mesafesi: 10.160 mm, renk: kırmızı, Üretim yılı: 2019, Donanım: ABS, 1 x kaldırma aksı 3 x yönlendirme aksı. Radyo uzaktan kumandalı yönlendirme. Hidrolik rampa. Kamera. = Daha fazla bilgi = Aks konfigürasyonu Lastik ölçüsü: 245/70R17.5 Frenler: Kampanalı frenler Süspansiyon: Havalı süspansiyon Arka aks 1: Çift tekerlekli; Sol iç lastik diş derinliği: %50; Sol dış lastik diş derinliği: %50; Sağ iç lastik diş derinliği: %50; Sağ dış lastik diş derinliği: %50 Arka aks 2: Çift tekerlekli; Yönlendirmeli; Sol iç lastik diş derinliği: %30; Sol dış lastik diş derinliği: %30; Sağ iç lastik diş derinliği: %30; Sağ dış lastik diş derinliği: %30 Arka aks 3: Çift tekerlekli; Yönlendirmeli; Sol iç lastik diş derinliği: %40; Sol dış lastik diş derinliği: %40; Sağ iç lastik diş derinliği: %40; Sağ dış lastik diş derinliği: %40 Arka aks 4: Çift tekerlekli; Yönlendirmeli; Sol iç lastik diş derinliği: %60; Sol dış lastik diş derinliği: %60; Sağ iç lastik diş derinliği: %60; Sağ dış lastik diş derinliği: %60 Ağırlıklar Boş ağırlık: 11.344 kg Taşıma kapasitesi: 54.656 kg Azami toplam ağırlık: 66.000 kg Bakım Muayene (APK): 02.2027'ye kadar geçerli Finansal Bilgiler Fiyat: Talep üzerine Kimlik Nwedpfezcuxrex Ag Dei Tip numarası: N/A F-S44 / YÖNLENDİRME AKSI - KALDIRMA = Firma Bilgileri = TÜM FİYATLAR İHRACAT İÇİN NETTİR. Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Rusça da konuşuyoruz. Bilgiler doğru olarak hazırlanmış olup, ilandan doğabilecek herhangi bir hak iddia edilemez.

Durum: ikinci el, makine/araç numarası: WFDFLT33902030059, boş ağırlık: 7.452 kg, azami yük ağırlığı: 27.548 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2023, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 92 m³, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", renk: siyah, The images are archive pictures; the vehicle may still be in use! Weights and Dimensions: Gross weight, permitted / technical: 35,000 / 39,000 kg Payload, permitted / technical approx.: 27,548 / 31,548 kg Aggregate weight, permitted / technical: 24,000 / 27,000 kg Permitted / technical kingpin load: 11,000 / 12,000 kg Nsdpfx Aowk Dc Rog Dswi Unladen weight (basic version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner measurement approx.: 2,040 mm Chassis Semi-trailer Freight Forwarder Fine-grain steel welded lightweight construction up to the landing legs, fifth wheel plate with replaceable 2'' kingpin Lashing point preparations integrated in the floor (up to 13 pairs) 24 t 2-speed landing gear, one-sided operation, with straight lower section, without compensating adjustment Extendable ladder at rear Side door holders Wheel chocks with brackets Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable protective cover for lighting unit Quarter-shell mudguards Rear collision protection Axles + Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle function, including forced lowering and starting aid, activated by braking three times Brake System 2-line compressed air brake system Color-coded pipe routing for easy service Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump output: Capacity: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l SB Tipper Body Aluminium box body made from high-quality, wear-resistant material. Front and side walls made of aluminium hollow profiles, all around the top welded with a wide special reinforcement profile made of aluminium, welded to a special frame at the bottom. Moving side wall for better unloading of the load, with reinforced curtain flaps at the bottom. Rear wall made of aluminium hollow profiles, double-wing door split 1/2 to 1/2, all around edged with a special U-profile with stop and rubber sealing, with 2 external rotary bar locks, locked above and below. Rear wall with mechanical safety lock, operated at the rear on the left in direction of travel. With swivelling crossbar at the top. Work platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roof tarpaulin Removable and swiveling crossbars for tarp support + tarp support at the front bulkhead and at the rear on the back wall, Roll-out tarpaulin stored on one side with 2 longitudinal tensioning straps, 3 ratchet straps at the side, at the front bulkhead and over the rear doors the tarpauli

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2008, toplam uzunluk: 9.480 mm, toplam genişlik: 2.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, dingil mesafesi: 7.330 mm, Üretim yılı: 2008, Donanım: ABS, = Diğer seçenekler ve aksesuarlar = - Havalı süspansiyon = Ek bilgiler = Aks konfigürasyonu Lastik ölçüsü: 385/65 R 22.5 Aks markası: SAF Frenler: Kampanalı frenler Süspansiyon: Havalı süspansiyon Arka aks 1: Sol lastik diş derinliği: %35; Sağ lastik diş derinliği: %35 Arka aks 2: Sol lastik diş derinliği: %35; Sağ lastik diş derinliği: %35 Arka aks 3: Sol lastik diş derinliği: %35; Sağ lastik diş derinliği: %35 Ağırlıklar Boş ağırlık: 5.300 kg Yükleme kapasitesi: 37.700 kg Azami yüklü ağırlık: 43.000 kg Durum Hasar: yok Kimlik Plaka: OK-97-KH Nodpfjzb Hlzsx Ag Dewi

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2015, yükleme alanı hacmi: 55 m³, toplam uzunluk: 10.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, renk: kırmızı, Üretim yılı: 2015, Donanım: ABS, - Alet kutusu - EBS - Merkezi yağlama Nsdpfx Aoyuyrzog Dswi

Durum: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Üretim yılı: 2026, Donanım: ABS, WEB TRAILER PRSH 27 FLATBED with hardwood floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Ride height 1,280 mm with fifth wheel height of 1,150 mm Spring center approx. 1,300 mm Maximum kingpin load approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made from welded longitudinal members and through-inserted cross members Outer frame height approx. 125 mm, 4 mm groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the outer frame with groove, each rated 5t! Landing gear: 24t telescopic landing gear by branded manufacturer (Jost/SAF) Axles: Branded axles (SAF/BPW/JOST) 9t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (optional) Axle spacing approx. 1,310/1,310 mm Brakes: EBS brake system by Knorr or Wabco Air lines with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Air tanks 2 x approx. 80L Tire pressure monitoring Lighting: LED 15-pin front connection Flashing side marker lights Tires: Premium 385/65 R 22.5 tires on steel rims Superstructure: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Floor: Weatherproof hardwood floor, 28 mm, alternately with galvanized omega steel profiles Hardwood boards screwed onto cross members (optional double screws) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium large contoured rear lamp panel Rear underride protection, welded (rectangular tube) Foldable and retractable rear right access ladder with platform Two wheel chocks with holders, plastic or galvanized Plastic fenders 180° over each axle Side underrun protection both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Nova Grey 7350 Other colors available at additional cost (subject to powder availability) KTL with zinc phosphating plus powder coating, highest corrosion protection Nwodpfog Dkx Eex Ag Dsi Hot-dip galvanizing (optional) Ex works price Attention!!! Pictures show optional extras. Get free, no-obligation advice and a personalized quote. Leasing, financing or hire purchase possible! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Errors and prior sale excepted!!!

Durum: yeni, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.730 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2026, Donanım: ABS, PRSSQ 27 SYS Three-axle Curtainsider with crosswise laminated wood floor Curtainsider body, side height: 2,650 mm (from the loading platform to the bottom edge of the outer frame) Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Ride height unladen approx. 1,250 mm at 1,130 mm fifth wheel height COC (Certificate of Conformity) Chassis frame construction: welded longitudinal beams with inserted cross members Outer frame height approx. 125 mm, 4 mm thick, with groove for lashing rings and external lashing holes 13 pairs of lashing rings (5t certificate per ring) Axles: Manufacturer’s free choice (SAF/BPW) 9t axle, 22.5" with large disc brakes EBS brake system by Knorr or Wabco Tyre Pressure Monitoring System (TPMS) Flashing side marker lights European brand tyres: 385/65 R 22.5 Body certificate according to DIN EN 12642 XL valid with two rows of wooden slats Certificate for 9t forklift axle load according to DIN EN 283 Certificate: 5t per lashing ring Rear portals with four internal locking bars, door leaves made of steel sandwich profiles Sliding roof with automatic locking, opens from the rear 3 sets of lateral sliding curtains Front wall: Steel, 400 mm steel cassettes inside, wear plate approx. 2.40 m Lighting system: 24 volts with multifunction LED lights Phenolic plywood floor 27 mm, laid crosswise Roof tarpaulin: reinforced version with 12x12 fabric Optional: equipped with tail lift Optional: equipped with internal sideboards Optional: equipped with FLEXSTRAP system Optional: equipped with pallet box, spare wheel, etc. Body painted in RAL colours as specified Chassis painted in RAL 9005 or MB 7350; other colours available at extra cost based on powder availability Njdpfx Agjg Dkxzs Djwi KTL coating with zinc phosphating plus powder for maximum corrosion protection Optional: Hot-dip galvanized finish Ex-works price Attention! Photos show special equipment. Get advice and have a free, non-binding offer drawn up. Leasing, financing, or hire-purchase available! We can accommodate your individual requirements! Contact us for a quotation. Errors and interim sale excepted!

Durum: yeni gibi (sergi parçası), boş ağırlık: 1.365 kg, azami yük ağırlığı: 2.145 kg, toplam ağırlık: 3.500 kg, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.100 mm, yükleme alanı yüksekliği: 1.890 mm, Üretim yılı: 2024, ANHÄNGERWIRTZ, your online pickup market for new trailers, offers strong brand-name products! Over 850 new trailers in stock Nedjypv Ibjpfx Ag Djwi Over 130 used trailers always available from trailershop Non-binding example: Directly from our exhibition, while stocks last! BJT RACE TRANSPORTER 7 397-5521-35-3-10-B 550X210X189CM TRIDEM ALLOY WHEELS 3500KG Car transporter Race 7 550x210x189cm 3500kg tridem low-loader with ALKO Bradley low-loader V-frame, 10" tires on alloy wheels, black closed poly body, side double and service doors, Complight aluminum perforated floor tracks, drive-over electric fold-down rear ramp and tiltable platform, electric winch, central floor toolboxes with lid, LED interior lighting, reversing and work lights, 4 red lashing straps, coupling lock, spare alloy wheel with cover, jockey wheel... Unladen weight approx. 1355kg Payload approx. 2145kg Don't hesitate – available while stocks last! Sales and phone orders during business hours: Mon – Fri 08:00 to 12:30 & 14:00 to 18:00 Or order 24/7 via our online shop at trailershop Content and images are subject to copyright – logos trademarked 03/26 Images and all details are non-binding. Article no.: 397-5521-35-3-10-B

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2008, toplam uzunluk: 9.480 mm, toplam genişlik: 2.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, dingil mesafesi: 7.330 mm, Üretim yılı: 2008, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Havalı süspansiyon = Diğer bilgiler = Aks konfigürasyonu Lastik ölçüsü: 385/65 R 22.5 Aks markası: SAF Frenler: Kampanalı frenler Süspansiyon: Havalı süspansiyon Arka aks 1: Sol lastik diş derinliği: %25; Sağ lastik diş derinliği: %25 Arka aks 2: Sol lastik diş derinliği: %25; Sağ lastik diş derinliği: %25 Arka aks 3: Sol lastik diş derinliği: %25; Sağ lastik diş derinliği: %25 Ağırlıklar Boş ağırlık: 5.300 kg Yük kapasitesi: 37.700 kg Azami toplam ağırlık: 43.000 kg Nodpfjy Rt Ipox Ag Dowi Durum Hasar: yok Kimlik Plaka: OK-95-KH

Durum: ikinci el, makine/araç numarası: YE13B0070AA4140059, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 06/2007, toplam uzunluk: 8.470 mm, toplam genişlik: 2.550 mm, dingil mesafesi: 6.740 mm, renk: diğer, Üretim yılı: 2007, Arka aks 1: Maks. aks yükü: 9.000 kg Arka aks 2: Maks. aks yükü: 9.000 kg Arka aks 3: Maks. aks yükü: 9.000 kg Boş ağırlık: 3.450 kg Yük kapasitesi: 35.550 kg Azami toplam ağırlık: 39.000 kg Nwodeyr Nngepfx Ag Dji Plaka: OS-22-LG