Kullanılmış Müller-Mitteltal Müller Eal-Ta-P 10,5 Tandempritsche satın al (37.820)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering system
Bwjdpfxsx Nli Ne Amzjp
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrical / Lighting:
* Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side)
* 15-pin electrical connector
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Fittings:
* Aluminium air tank
* Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm
* Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side
* 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery)
* 30 mm phenolic plywood floor
----Cable Drum Mounts:
* 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and drum width max. 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross connection
* Max. drum weight per mount: 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for drum shaft securing
* Steel drum shaft, 76 mm diameter with centering and rotatable ends
* 2 spacer rings
* 2 polyamide centering cones
* 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling
----Loading Height:
* Loaded approx. 1,040 mm
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in a black tone
----Info:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 51 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
Bwedpsxf Skpsfx Amzop
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4:
----Braking System:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flanged Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm)
* 40 mm flanged towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required)
* LED lighting system
* 15-pin electrical connector
Bwsdpfjndpn Sox Amzjp
----General Attachments:
* Jost landing leg at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Provisions for subsequent installation of 20" container locks at the front and rear
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist
* Bolted hot-dip galvanized rear stakes
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to fit 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front and rear walls
* Vehicle hot-dip galvanized
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Ara
Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1: For hook lift containers and as a low-loader trailer
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 ton axles
----Suspension:
* Air suspension with lifting/lowering system and RTR valve
----Drawbar:
* Drawbar, 2,000 mm long, with 40 mm towing eye and height adjustment
----Electrics / Lighting:
* Tyre pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* LED rear lights, 12 / 24 V
* 15-pin power plug
----General Attachments:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm
* Reflective contour tape on sides & rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Plastic rear impact buffers
* Folding A-board at the rear
----Loading Platform:
* Main frame with raised outer frame for guiding roll-off containers
* Steel floor plate with roller recesses in the bogie area
* Container lengths from 5,500 – 7,000 mm possible
* Pneumatic 4-way clamp locking as well as mechanically insertable bracket stops front in the running area, load securing certificate according to DIN 30722-1
* Weld seam as non-slip coating in the ramp area
* Mechanical falling supports at rear
----Load Securing:
* 1 pair 10 t UVV lashing rings at the front wall carrier
* 3 pairs of 10 t UVV lashing rings on the sides in the outer frame
* 4 x 2 t cloverleaf-type lashing eyes per side
* 4 x 8 t lashing brackets set into the outer frame
----Ramps:
* 1 pair of aluminium loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear supports hot-dip galvanized
* Drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer’s warranty
Bwjdpfjl Tpc Aox Amzop
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 43 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle compensation at the rear
* Side underrun protection
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection
* Side and rear conspicuity tape, reflective
* Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not included) with simultaneous lashing capability
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere
* 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope)
* Widening boards stored in the center of the loading area
* Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest)
* Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm)
* 4-way control block for later retrofitting of hydraulic ramp shifting
* Mechanically adjustable lateral ramp movement
* Load area above slewing ring: approx. 1,960 x 2,520 mm
* Load height unladen approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Load height unladen approx. 910 mm (incl. 860 mm approach slope)
* Chassis, bogie, drawbar, and loading ramps hot-dip galvanized
Bjdpfx Amel Th Adozewp
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg empty weight
* -- technically permissible gross weight of 30,000 kg --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale reserved
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4:
----Braking System:
* Wabco EBS (electronic braking system)
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing aggregate
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange drawbar eye
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights 12/24 V
* Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Jost mechanical landing gear front
* 2 mechanical folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted at front right side of the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Net hooks at the central locking positions as well as 2 on the front wall
* Steel pallet three-way tipper body with reinforced strong side walls (continuous upper side walls with internal pipe reinforcement - without center stanchions - foldable with side wall spring lifter)
* Rear stanchions bolted
* Combined steel swing doors at rear, asymmetrically split, two-leaf design, can be pivoted and locked at 270° (not foldable) and with additional pendulum frame for automatic rear wall opening during tipping process; locking by galvanized rotating bar lock at the back and central locking. Deactivation function for automatic rear wall feature when tipping backwards with open swing door
* 4 mm fine-grain steel floor plate
----Load Securing:
* Each corner with 1 x 5 t lashing point
* 4 x 3 t recessed lashing rings per side on the outer frame
----Chassis:
* Chassis made from fine-grain steel
----Ramps:
* Rear mounting rail for access ramps
* 1 pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles
* Lockable storage compartment for ramps installed below the loading area in the chassis, accessible from the rear
----Tires:
* Tire size: 358/55 R 19.5
----Paintwork:
* Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized
Bsdpjx Hm Rcsfx Amzswp
* Axles, springs, air tank, and landing gear painted in black
* Side walls painted in a desired RAL color (special or metallic paints excluded) – color can be changed up to 6 weeks before completion
----Information:
* Reinforced body with load securing certificate
* Subject to prior sale and errors
* Sample images
----Delivery Time:
* Available immediately from calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4:
----Braking System:
* Wabco EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
Bedjx Hm Riopfx Amzswp
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange-type Drawbar Eye:
* Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange-type drawbar eye
----Electrics / Lighting:
* 15-pin power connector
* LED rear lights, 12/24 V
* Tire pressure monitoring system with display capability in the truck via EBS signal – no installation required on truck side
----General Attachments:
* Jost mechanical landing leg at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on front right side of chassis
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Mesh hooks installed at the central locking bearings and 2 units on the bulkhead
* Steel pallet-drop, 3-way tipper superstructure with reinforced Strong sideboards (continuous upper side panels with internal reinforcement tube – without intermediate stanchions – foldable using board catch spring lifter)
* Rear stanchions bolted
* Combination steel double rear wing doors – asymmetrically split, swingable and lockable up to 270° (not foldable) – with additional pendulum frame for automatic tailgate opening during tipping; locking via galvanized rotary bolt at the rear and central locking system; deactivation function for the automatic rear wall function when tipping backwards with the wing door open
* 4 mm fine-grain steel floor plate
----Load Securing:
* 1 x 5 t lashing point at each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Chassis:
* Chassis constructed of fine-grain steel
----Ramps:
* Rear fitting track for loading ramps
* 1 pair of aluminium loading ramps approx. 3570 x 410 mm (load capacity 10 t per pair) suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps embedded underneath the loading area at the rear of the chassis
----Tyres:
* Tyres: 358/55 R 19.5
----Paintwork:
* Drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized
* Axles, springs, air reservoir and landing leg painted in a black tone
* Body side boards painted in a RAL colour of your choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion
----Information:
* Reinforced superstructure with load securing certificate
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Ready for immediate delivery ex works from week 29/2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Ara
Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem balancing unit
----Drawbar / Towing Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear, activated via reverse gear
----General Attachments:
* Mechanical BPW landing gear at the front
* 2 mechanical foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Two-step access in front of the bulkhead on the left (direction of travel)
----Chassis:
* Chassis made from fine-grained steel
----Tipping Body:
* Net hooks located at the central locking bearings and 2 on the bulkhead
* Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards
* Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist
* Rear stanchions bolted
* Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping
* Locking via galvanized rotating rod lock at the rear and central locking
* Deactivation function for automatic tailgate on rear tipping with open wing door
* Rear mounting rail for loading ramps
----Load Securing:
* Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side
* 4 mm floor plate made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable compartment under the loading area, built into the chassis from the rear
----Paintwork:
* Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised
* Sidewalls and tailgate painted RAL 3003 ruby red
* Axles, springs, air tanks, and landing gear painted in black
Bedpfx Amexf Skvjzewp
----Info:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL3- achs Sattel.-Luft-Lenk,hydr. Rampe mit Gummi
Ara
Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW Eco Plus axles
* Rear axle steered with electro-pneumatic steering lock
----Suspension:
* Air suspension with lifting and lowering function as well as RtR valve
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting system 12 / 24V
* Removable LED beacon at the rear left
----General attachments:
* Side underrun protection
* Landing legs at the front as well as mechanical swinging supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel carrier under the chassis, right side
----Low loader platform:
* Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid
* 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform
* Rear wall -150 mm- inserted
* Rear slope on the saddle platform to the low-bed, approx. 700 mm long
* Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards
* Chequer plate over the axles
----Extensions:
* 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform)
* Mechanically adjustable warning panel sets front and rear
----Load securing (Lashing Package):
* On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame
* On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame
* 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough
* 2 x container locks directly after the neck bend on the low-bed platform
----Excavator arm trough:
* Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm
----Loading ramps:
* Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally)
* 4-way control block for later customer-side retrofitting of hydraulic ramp shifting
* The outer plank on the loading ramp is made of 50 mm hardwood
* Climbing strips on the outer frame of the ramp as well as on the approach slope
* Rubber on the ramp and the approach slope
----Hydraulics:
* Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min)
----Loading dimensions:
* Load area of the saddle platform: approx. 3,935 x 2,480 mm
* Low-bed load area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm approach slope)
Bjdpfjy Ngz Hex Amzewp
----Fifth wheel height:
* approx. 1,220 mm (suitable for 2- and 3-axle tractor units)
----Paintwork:
* Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized
* Axles, landing legs, air tanks painted in black
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample pictures may contain equipment
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL24 to. Kombi Cont. fl.-Liftachse NEU
Ara
Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0:
----Braking System:
* Wabco EBS-E (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
Bwodpepk D Iiefx Amzop
----Suspension:
* Air suspension with manual lowering at the rear
----Axles:
* 3 x 11 t Gigant axles
* Center axle with lift function
----Drawbar:
* Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device
----Electrics / Lighting:
* LED tail lights
* 15-pin power connector
* TPMS (Tire Pressure Monitoring System)
----General Equipment:
* Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm)
* Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm)
* Side underrun protection
* Plastic quarter mudguards with splash protection
* Rear plastic impact protection buffers
* Mechanical drop-down supports at the rear
----Container / Low Loader Platform:
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers
* Steel floor with wheel recesses in the bogie area
* Suitable for roll-off containers with a container length of 5,500 - 7,000 mm
* Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails
* Load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with max. 10 m³ volume possible
* Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop
----Load Securing:
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively
* 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
----Ramps:
* Weld beads as anti-slip surface in the track area of the ramp slope
* 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Tyres:
* Tires: 235/75 R17.5
----Loaded Platform Height:
* Platform height loaded: approx. 1,003 mm
----Payload:
* Payload: 18,900 kg
----Paintwork:
* Contour tape, reflective, on sides and rear
* Axles, turntable, drawbar, and air tanks painted in black
* Hot-dip galvanized main frame
----Info:
* Technical permissible total weight: 27,000 kg
* New vehicle without first registration with manufacturer warranty
* Subject to alterations and prior sale
----Delivery time:
* Available from approx. week 47/2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage electrical system
* LED tail lights
* Removable beacon at the rear
* Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle
Bsdpjx Ipa Njfx Amzowp
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), with simultaneous lashing facility
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant)
* Widening planks stored at the center of the loading area
* Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest)
* Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm)
* Mechanically adjustable lateral ramp positioning
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope)
* Chassis, bogie, towing bar, and access ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* Dead weight 5,900 kg
* --Technically possible gross vehicle weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts)
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with raise/lower control
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrics / Lighting:
Bwodpox Nlkajfx Amzop
* Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing
* Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side
* 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery
* 30 mm phenolic resin-coated plywood floor
----Cable Drum Mounts (Drum Supports):
* 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and max. drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with crossbar
* 6,000 kg drum weight per cable drum mount
* Without drive system and drum brake
* Support arm with clamping latch to secure drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 clamping rings
* 2 centering cones made from polyamide
* 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding
----Loading Height:
* Approx. 1,040 mm when loaded
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in black
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (tire pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not supplied), also usable as lashing points
* Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope)
* Widening planks stored in the middle of the loading area
* Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic side-shifting of ramps
* Load area over the turntable: approx. 1,960 x 2,520 mm
Bwodox Ipbgjpfx Amzep
* Unladen load height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (including 860 mm drive-on slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in a black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible gross weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. calendar week 36/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Ara
Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
Bwedpeykx Nqofx Amzjp
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required)
* Rear axle as self-steering axle with electro-pneumatic steering lock
* Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required)
----Suspension:
* Air suspension with lift and lower function and RTR valve
----Electrics / Lighting:
* Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at the rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for length extension lighting
* Side marker lamps with indicator function
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Side underrun protection
* Support winds at the front and swiveling supports at the rear on the chassis
* Straight steel mudguards
* Spare wheel holder in front of the front wall crossmember (without spare wheel)
* Mechanically adjustable warning sign packages front and rear
* Swivel arm as a carrier for connection cables from the truck to the semi-trailer
----Lowbed Deck:
* 2nd kingpin position
* Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid
* 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable
* Rear wall insertable, 150 mm high
* Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps
* Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks
* Tear plate over the axles
* 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area)
* Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers
* Preparation for container locks on the swan neck
----Load securing (LaSi package):
Fifth wheel platform:
* Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm)
* 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam)
Lowbed platform:
* 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope)
* 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles)
* 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well)
----Excavator boom support:
* Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTALachs leichtbauweise, Radmulden, Alu- Rampen
Ara
Durum: yeni, azami yük ağırlığı: 27.940 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t axles
* Air suspension with raise/lower function and RtR valve
* Start-assist for maneuvering via EBS to the first axle (no truck-side installation) with lifted lift axle +30 mm ride height
* Smart-Board information tool mounted on trailer with pressure sensors for total axle load display
* Last axle configured as self-steering axle with electro-pneumatic steering lock
* Steering lock for the self-steering axle can be activated from the tractor for maneuvering via EBS (without truck-side installation)
* 2" king pin
Bwedjwh Hdxjpfx Amzop
* 1 liftable axle
* Side underrun protection
* Front aluminum drop legs and rear swinging supports on chassis
* Alcoa LVL One aluminum rims
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at rear
* 2 additional LED reversing lights
* 2 LED work lights on trailer sides (no truck-side installation)
* 7-pin socket at rear for overlength lighting
* Side marker lights with indicator function
* Tire pressure monitoring with in-cab display option via EBS signal (without truck-side installation)
* Mechanically adjustable warning sign holder packages front and rear
* Straight steel fenders
* Fifth-wheel platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 mm x H = 500 mm x L = 665 mm) with top folding lid and side doors in the chamfered corners
* On each side of the fifth-wheel platform, 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable
* Rear drop-in wall, 150 mm high
* Rear slant on the fifth-wheel platform to the lowbed, approx. 700 mm long with checker plate and perforated strip for attaching aluminum loading ramps
* Fifth-wheel and lowbed platforms with 50 mm clamped wooden planks
* Tread plate above axles
* Preparation for 3 receptacle shafts under the fifth-wheel platform for storing optional aluminum ramps
* Swivel arm as a carrier for connecting lines from the truck to the trailer
* Load securing package consisting of: perforated outer frame on the fifth-wheel platform, 45° bent with hole pattern for lashing equipment (2 t lashing force per point with min. 480 mm spacing), 2 x 6.3 t recessed lashing rings on each side, 1 x 16.5 t lashing ring per side on the slope from lowbed platform to fifth-wheel platform, 2 pairs of 16.5 t lashing rings in the lowbed platform (1 pair on the longitudinal beams after the step, 1 pair over the middle axle next to the longitudinal beam), 3 x 13.4 t lashing rings per side on the outer frame (1 at beginning of fifth-wheel frame step, 1 at start of ramp slope, 1 at end of ramp slope), 3 x 10 t lashing rings each side (2 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle), 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear)
* Extended excavator arm resting area from the end of the last rigid axle over the steering axle to the rear cross member, continuous with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 mm / Depth front 170 mm; 2 x 6.4 t lashing rings per side in the excavator arm rest
* 2 wheel recesses per side, 390 mm deep and 640 mm wide, for transporting wheel loaders with a wheelbase of 3,000 – 3,590 mm and a tire diameter of 1,760 mm – with sliding covers
* 2nd sliding cover...
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (tire pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not supplied), also usable as lashing points
Bwodsx Ipb Hjpfx Amzjp
* Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope)
* Widening planks stored in the middle of the loading area
* Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic side-shifting of ramps
* Load area over the turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (including 860 mm drive-on slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in a black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible gross weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. calendar week 36/2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALTandem Tieflader- Tiefbett, 5,5m - durchfahrbar
Ara
Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9:
* Wabco EBS (elektronik fren sistemi)
* RDÜ (lastik basıncı izleme)
* Kampanalı frenler, 2 x 5,5 ton Gigant dingil
* Parabol yaylar ve denge tertibatı
* Yaklaşık 300 mm yükseklik ayarlı çekme kolu
* BPW destek ayağı
* Arka mekanik düşme destekleri
* Ön sağda yan duvara monte plastik alet kutusu
* Yan darbe koruması
* LED aydınlatma
Bedpfxowyhzpo Amzjwp
* 50 mm iğne ağacı zemin
* Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre
* Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz)
* Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli
* Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı
* Tam üretici garantisine sahip yeni araç
* Hatalar ve ara satış hakkı saklıdır
* Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Ara
Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
Bedpfx Ajx Ipavemzjwp
* EBS braking system
* TPMS tire pressure monitoring
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization (rear)
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection
* Reflective contour tape on sides and rear
* Folding lid (hot-dip galvanized) for toolbox on the bogie platform
* Multi-voltage system
* LED rear lights
* Detachable rotating beacon (rear)
* Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle
* 15-pin electrical connector
* 4 stake pockets per side (stakes not included) with integrated lashing points
* Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal)
* Widening planks stowed in the center of the loading area
* Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough)
* Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Load area above turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (incl. 860 mm approach angle)
* Chassis, bogie, towing bar, and ramps hot-dip galvanized
* Axles, springs, air reservoir, etc. painted in black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* Technically permissible gross weight of 30,000 kg
* Vehicle is hot-dip galvanized
* Brand new vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ara
Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift/lowering device
----Tow Bar:
* Tow bar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side)
* 15-pin power plug
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm
* Lateral underrun protection
* Plastic quarter fenders
* Rear underrun guard
----Platform:
* Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing
* Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side
* 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included)
* 30 mm phenolic resin plywood flooring
----Drum Supports:
* 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm)
* Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm with cross-connection
* Load capacity per cable drum support 6,000 kg
* Without drive and drum brake
* Support arm with tension latch for securing the drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
Bedpfx Amex Nlkgszswp
* 2 locating rings
* 2 centering cones made of polyamide
* 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding
----Loading Height:
* Loaded approx. 1,040 mm
----Coating:
* Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized
* Axles painted in a shade of black
----Information:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 51 / 2026
Küçük ilan
Empfingen
2.363 km
Ticari araç
Müller-Mitteltal3 Achs Anh für Container Frontbeladung TÜV03 27
Ara
Durum: ikinci el, ilk tescil: 10/2014, toplam ağırlık: 27.000 kg, boş ağırlık: 5.100 kg, renk: gri, vites türü: diğer, emisyon sınıfı: hiçbiri, Üretim yılı: 2014, azami yük ağırlığı: 21.900 kg, bir sonraki muayene (TÜV): 03/2027, süspansiyon: çelik, lastik boyutu: 265/70 R19.5, ön lastik ölçüsü: 265/70 R19.5, arka lastik boyutu: 265/70 R19.5, şoför kabini: diğer, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, elektronik denge programı (ESP), kamyon kaydı, sisal lambaları, şasi, Müller Mitteltal 3-axle trailer for skip containers TM 2 24.0
* Suitable for 2x 12 m³ containers/skips
* Lowerable pneumatic drawbar for front loading
* Adjustable stop point for container mounting
* Manual lashing with ratchets
* Sealed floor
* BPW axles
* Leaf suspension
* Galvanised frame/chassis
* Drum brakes
* Wear plates
* Additional auxiliary lights
* 7 lashing rings per side, mounted externally
* Large toolbox
Bodpfxjzbbbdo Amzswp
* Weights: GVW – 27,000 kg, Tare – 5,170 kg, Payload – 21,830 kg
* German vehicle with German documentation!
* 1st owner!
* First registration: 21.10.2014
* Vehicle inspection (TÜV) valid until 03/2027
* Safety inspection (SP) valid until 09/2026
* VIN: WMM00000E0058208
Subject to prior sale, errors, and changes!
Some company logos have been removed from the images – please ask if needed!
No guarantee for the functionality of extra features!
Your contact:
Christoph Ott
Tel. & WhatsApp:
Küçük ilan
Winterswijk
2.630 km
Düşük yükleyici
Müller-MitteltalTTS-VLL 30.0 Profi.
Ara
Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 10/2013, toplam genişlik: 2.750 mm, Üretim yılı: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Alçak Yükleyici | 3 dingilli | Hidrolik alçaltılabilir yükleme platformu | 48 ton izin verilen toplam ağırlık | 275 cm genişliğinde
Son derece sağlam ve dayanıklı Müller Mitteltal ITS-VLL 30.0 Profi alçak yükleyici, makine, inşaat makineleri ve ağır hizmet ekipmanlarının taşınması için idealdir. Sağlam yapısı ve güvenilirliği ile bilinir. Teknik Veriler:
Marka: Müller Mitteltal
Model: ITS-VLL 30.0 Profi
Şasi Numarası (VIN): WMM00000D0057250
İzin verilen toplam ağırlık: 48.000 kg
Dingil konfigürasyonu: 3 dingilli
Dingil yükleri:
1. dingil: 10.000 kg
2. dingil: 10.000 kg
3. dingil: 10.000 kg
İzin verilen king pin yükü: 18.000 kg
Yükleme platformu: Düşük yükleme platformu (alçak şasi tipi)
Yükleme rampaları: hidrolik tahrikli
Alçak yükleme platformu: Hidrolik olarak ayarlanabilir (yukarı/aşağı)
Lastikler: iyi durumda
Konstrüksiyon: Tam çelik şasi
Maksimum hız: 80 km/s
Donanım & Opsiyonlar:
Bwedpfx Aezc E Nnemzsp
Ağır hizmet tipi alçak şasi
Hidrolik olarak ayarlanabilir alçak yükleme platformu (yukarı/aşağı)
Hidrolik arka yükleme rampaları
Geniş (275 cm) ve sağlam yükleme alanı
Ekskavatörler, silindirler, vinçler vb. için uygun
Dayanıklı yapı, hemen kullanıma hazır
Durum:
Treyler kullanılmıştır, ancak çalışır durumdadır ve yaş ve kullanım kaynaklı izler taşıyabilir. Teknik olarak sağlam ve güvenilir bir makine taşıyıcısıdır.
Hemen kullanıma hazır – taşıma şirketleri ve inşaat firmaları için ideal.
Daha fazla bilgi veya yerinde inceleme için lütfen bizimle iletişime geçin.
= Ek Bilgiler =
Dingil konfigürasyonu
Arka dingil 1: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli
Arka dingil 2: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli
Arka dingil 3: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli
Ağırlıklar
Boş ağırlık: 14.500 kg
Taşıma kapasitesi: 33.500 kg
Azami toplam ağırlık: 48.000 kg
Bakım, Geçmiş ve Durum
APK (Araç Muayenesi): 02.2027’ye kadar geçerli
Teknik durum: çok iyi
Görsel durum: çok iyi
Finansal Bilgiler
Fiyat: Talep üzerine
Diğer Bilgiler
Daha fazla bilgi için Henk Gerrits, Klaas Gerrits veya Dhr. Gerrits ile iletişime geçebilirsiniz.
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Coppenbrügge
2.460 km
Düşük yükleyici
Müller-MitteltalT 3 Profi 30
Ara
Durum: ikinci el, dingil konfigürasyonu: 3 dingil, süspansiyon: parabolik yaprak (yay), lastik boyutu: 235-75R17.5, Üretim yılı: 2010, 3 dingilli alçak şasi römork, arkadan yüklenebilir. Azami toplam ağırlık 30.000 kg, taşıma kapasitesi 22.700 kg. Yükleme alanı 8.900 mm (7.000 + 1.900) x 2.550 mm, aşırı genişlik için ikaz paketi, 12 yük bağlama halkası ile 8 dikme cebi, aynı zamanda bağlama imkanı, 6 adet alet kutusu. İki parçalı hidrolik rampalar yaklaşık 2.100+2.000 x 800 mm ve kauçuk kaplamalı, hidrolik arka destek. BPW akslar, EBS, dengeleme ünitesine sahip parabolik süspansiyon, lastik ölçüsü 235-75 R 17.5. Kavisli çekme kolu, döner çekme gözü 40+50 mm. 2 hatlı hava (Duomatik), 2 hatlı hidrolik, 24 volt. Boşken yükseklik yaklaşık 910 mm. Turuncu boyalı. Muayenesi 03-2027'ye kadar geçerli.
= Ek Bilgiler =
Bwodoy Evvljpfx Amzop
Lastik ölçüsü: 235-75R17.5
Süspansiyon: Parabolik süspansiyon
Boş ağırlık: 7.300 kg
Yük kapasitesi: 22.700 kg
Azami toplam ağırlık: 30.000 kg
Üretim ülkesi: DE
Daha fazla bilgi için Jan-Marc Schwickert ile iletişime geçin.
Küçük ilan
Koenigs-Wusterhausen
2.227 km
Alçak şasi römork
MÜLLER-MITTELTALTieflader T 4 Profi 40,0 Tiefladeranhänger hydr.
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2020, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 9.800 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS
Bodpfxoy T Dh Se Amzswp
* Rear support
* BPW ECO-Plus axles
* Amber rotating beacon
* Alloy wheels
* Duomatic air coupling
----Body: Galvanized low-loader trailer (2500+7300mm)/Loading height approx. 900mm, rear sloped/Ramp height approx. 770mm, steel/wood floor with anti-slip covering, extendable to 3 meters, hydraulic loading ramps (folded for low loading angle) with anti-slip covering, also hydraulically laterally adjustable, lashing rings
Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our terms and conditions (see imprint).
Küçük ilan
Kaufungen
2.416 km
Alçak şasi dorse
MÜLLER-MITTELTALTS2 KOMPAKT Tieflader 2 Achse Hydr. Rampen
Ara
Durum: ikinci el, azami yük ağırlığı: 23.900 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2007, Üretim yılı: 2007, Dahili araç numarası: G400178
Kaufungen'deki tesisimizde hemen teslim edilebilir
Daha fazla bilgi için:
* Golec Nutzfahrzeuge GmbH (Almanca, İngilizce, Bulgarca, Rusça)
* Viktoria Sologubova (Lehçe, Rusça, Ukraynaca, İngilizce)
Boş ağırlık: 7.100 kg
Toplam uzunluk: 10.800 mm
Azami izin verilen ağırlık: 31.000 kg
Bilgi hatalarına karşı değişiklik hakkı saklıdır
Bwedpfx Amozahg Dezsp
Kullanılmış aracınızı memnuniyetle takasa alıyoruz.
Finansman doğrudan bizimle mümkündür.
GOLEC NUTZFAHRZEUGE GMBH
Konuşulan diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.
Küçük ilan
Alsdorf
2.622 km
Alçak şasi römork
MÜLLER-MITTELTALETÜTAR 14,4 Tieflader, LED, Runduml.
Ara
Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer
Available in 37th week of 2026. Inquiry no.: 31941. Delivery to your address possible.
* We are happy to provide a tailored offer.
* -----
* Gross weight: 14.4 t, Payload: 10.95 t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27 m x 2.47 m platform with galvanized 400 mm front wall
* Digger bucket rest made of hardwood bolted to the front wall
* Unladen deck height: 930 mm / Laden: 870 mm
Bwsdpozbfmqefx Amzjp
* One-piece ramps with hot-dip galvanized anti-slip grating, adjustable to approx. 20 mm width, secured by holding rods and diagonal supports
* Ramp lift with vertically mounted, adjustable springs for convenient single-operator use
* 4 UVV drop lashing rings (LC 6300 daN)
* Perforated outer frame (45° angled, with lashing holes; lashing point load capacity LC 2000 daN at minimum 480 mm spacing). Installation of drop lashing rings LC 3000 daN approx. 600 mm apart possible. Tight crossmember spacing, high-profile front & rear ends with rear loading slope, hot-dip galvanized
* 10 UVV lashing rings LC 3000 daN, retractable in the existing hole pattern on the outer frame, in addition
* Additional lashing options via drilled holes (Ø 50 mm, LC 1200 daN) in front and rear beams
* Toolbox mounted in front of the front wall
* Side marker lights with indicator function
* 50 mm thick softwood floor. Chassis hot-dip galvanized
* Height-adjustable landing gear at the front, folding supports at the rear
* 2 container locks recessed in the front crossmember
* Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable. 50 mm towing eye available on request
* 1 removable LED beacon at the rear
-----
* Leasing, hire purchase, financing, trade-in available
* Example: €525 per month, 60-month term, no down payment, no final installment
-----
* Our opening hours:
* Monday – Thursday: 08:00 – 17:00
* Friday: 08:00 – 15:00
Outside of opening hours, appointments are possible by arrangement.
We speak German, English, Polish, French.
Leasing, financing, and trade-in available.
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal müller eal-ta-p 10,5 tandempritsche"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.




































































































































































































































































































































































































































































































