Kullanılmış Müller-Mitteltal Tieflader Mit Radmulden Langerampen satın al (8.232)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Lübbecke
2.526 km
Alçak dorse
Müller-MitteltalTieflader mit Radmulden Langerampen
Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne
Ljdjxw T Uaopfx Alajrl
- Çift tekerlek dingili
Küçük ilan
Bobenheim - Roxheim
2.426 km
Alçak şasi dorse
MÜLLER-MITTELTALTieflader TS3-RM ML30,0 mit Radmulden Lenkachse
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 38.230 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2026, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Müller-Mitteltal Low Loader with Wheel Wells TS 3 RM ML 30.0 2 Loading Heights and Ramps
* Fifth wheel load increase from 12 t to 18 t included.
King pin mounted in: Second king pin position 2", king pin up to and including
Gooseneck 2,750 mm. Rear swing radius approx. 2,400 mm (recommended minimum clearance: 150 mm). Forward swing radius
1,480 mm or 1,570 mm with spare wheel. Note: Adequate clearance to the towing vehicle must be ensured by the customer.
* Pull-out sections for the wheel wells front and rear (205 mm deep). 6 removable planks for wheel well mounting brackets as receive slots according to code 09.112 ALU air tank instead of steel.
Ljdpfxoy R Ipus Alaerl
* Smartboard control box mounted as an infotool on the trailer with pressure sensors for total axle load display. Display options either via the control box or in the truck via the EBS air suspension system (depending on truck manufacturer)
* ?SP-combi package: Toolbox with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the saddle platform W=2,480 x H=500 mm with folding top cover, side doors and angled Alu side walls foldable to the saddle platform (500 mm high), ALU rear wall plug-in (150 mm high), ALU boards inside and outside painted RAL 9006 white aluminum. Incl. folding and removable rear stanchions, galvanized (without top coat). Incl. bolted front section. Front cross member length to gooseneck 3,935 mm. Forward swing radius without spare wheel with gooseneck measurement 2,450 mm or 2,750 mm approx. 1,750 or approx. 1,480 mm.
* 2 container locks recessed in the front cross member
* 3 storage compartments under the saddle platform for storing optional ALU loading ramps or wooden planks for wheel well covers
* Folding outriggers / extendable outriggers (galvanized) and wooden planks for widening incl. (not on the rear slope), plank storage on the saddle platform (maximum load track width 2,500 mm)
* Second LED position light in the warning package at front and rear (double lighting), only in conjunction with the warning package
* 2 LED reversing lights at the rear of the trailer, activated with reverse gear (suitable for 12V and 24V), a maximum of 2 extra units permitted
* 7-pin socket at the rear, allocated for overlength illumination with tail light (58 R) and ground
* Rubber lining on the entry slopes left and right (approx. 860 mm long) 190 07644 rubber strip, on the inner plank of the single-piece ramps
* Fully automatic central lubrication system with pump (24V), grease container and integrated trailer control unit, without ramp connection (for steering: incl. connection to the distributor on the saddle platform),
Note: Only for towing vehicles with 24V lighting system!
Subject to prior sale and errors excepted!
Sale exclusively under our General Terms and Conditions
Important notice: Despite careful checking of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of the various platform providers. For this reason, we would like to point out that all information is provided without guarantee and does not constitute any legal claim.
Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for contract initiation. The information provided here is without guarantee and does not constitute any ...
Küçük ilan
Schlierbach
2.315 km
Düşük yükleyici
Müller-MitteltalT4 4-Achs Tieflader Radmulden luftgefedert T4 4...
Çağrı
Koşul: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile
- 4 x havalı süspansiyonlu GIGANT aks
- havalı süspansiyonlu
- 4 x teker çukuru
- mekanik rampa
- arkada 2 destek, katlanabilir
- uzatılabilir uyarı levhaları
- ABS
Lredpewmpbdefx Alajl
- MICHELIN lastikler: 235/75 R 17.5
- ağır model: 40.000 kg azami yüklü ağırlık
- boş ağırlık: 8.400 kg
- toplam uzunluk: 11.750 mm
- 50 mm çeki halkası
Özellikle kalk freze makineleri taşımak için uygundur!
- Alman römorku
- Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün!
Hata ve ön satış hakkı saklıdır!

Şimdi bilgi alın
+49 201 858 95 507
+49 201 858 95 507
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT3 3 Achs Tieflader mit ABS
Çağrı
Koşul: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: !
Ljdpjy T E Dzjfx Alasrl
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0:
Lrodsq Euakopfx Alasl
----Braking System:
* Wabco EBS-E (Electronic Braking System)
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required)
* Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock
* Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required)
----Suspension:
* Air suspension with lift and lower function, including ride height control valve
----Electrics / Lighting:
* Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display
* 15-pin electrical connector
* LED lighting 12/24 V
* Removable LED rotating beacon at rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for overlength lighting
* Side marker lights with indicator control
* Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Side underrun protection
* Landing gears at the front and swing-down supports at the rear of the chassis
* Straight steel wheel arches
* Spare wheel holder in front of the bulkhead crossmember (without spare wheel)
* Mechanically adjustable warning sign packages at front and rear
* Swivel arm as carrier for connection cables from truck to trailer
----Low Loader Platform:
* 2nd kingpin position
* Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid
* 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable
* Rear board plugged in, 150 mm high
* Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps
* Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks
* Tear plate over axles
* 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area
* 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering
----Load Securing (LaSi Package):
Fifth Wheel Platform:
* Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm)
* Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam)
Low Loader Platform:
* Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer)
* Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle)
* Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well)
----Excavator Arm Rest:
* Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm
* Each side with 2 x 6.4 t lashing rings
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side)
* Rear axle configured as a trailing steering axle with electro-pneumatic steering lock
* Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side)
----Suspension:
* Air suspension with raising and lowering function and ride height control valve
----Electrics / Lighting:
* Smart-board info tool mounted on the trailer with pressure sensors for total axle load display
* 15-pin power socket
* LED lighting 12 / 24 V
* Removable LED beacon at rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for overlength lighting
* Side marker lights with indicator control
* Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side)
----General Attachments:
* Side underrun protection
* Support legs at the front and swivel jacks at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder in front of the front wall cross member (without spare wheel)
* Mechanically adjustable warning board kits at front and rear
* Pivoting arm as carrier for connection lines from truck to semi-trailer
----Low Loader Platform:
* 2nd king pin position
* Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid
* Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color)
* 150 mm high inserted rear panel
* Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps
* Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks
* Tear plate over the axles
* 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area)
* 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses
----Load Securing (LaSi package):
Semi-trailer platform:
* Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing)
* 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member)
Low-bed platform:
* 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp)
* 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle)
* 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess)
Ledpfjtpta Dox Alajrl
----Excavator Arm Rest:
* Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm
* 2 x
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with balance mechanism
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, 300 mm range
* Drawbar extension of 250 mm (total length 2,250 mm)
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox, front right outside on the bulkhead
Lrsdpfxeq Dyvvj Alasl
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Sidewalls made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel rear wall, retractable between the ramps – storage bracket on the inside of front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm
* Option to install 3 t flip lashing rings every 600 mm
* Each front and rear corner with 1 x 6.3 t lashing ring
* Various holes in bulkhead and rear crossmember for additional 1.2 t lashing possibilities
* Profifix lashing rail along the longitudinal axis (center) for lashing loads up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm overall height)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall
* Sidewall color in RAL 9010 pure white
* Painting of sidewalls in a different RAL color available at additional cost
----Information:
* --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 29/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release mechanism for spring-loaded actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalization unit
----Drawbar / Drawbar Eye:
* Height-adjustable drawbar (adjustable by approx. 300 mm)
* Drawbar extension by 250 mm (up to 2,250 mm)
* 40 mm flange-type towing eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right, mounted on the outside of the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made from smooth sheet metal
* Drop sides made of trapezoidal-profile steel sheet, folding down with sideboard spring assist
* Rear wall made of steel, can be inserted between the ramps (storage bracket for non-use inside in front of the bulkhead)
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* One 6.3 t lashing ring front and rear, in each corner
* Various drilled holes in the front and rear crossmember for 1.2 t lashing points
* Profifix lashing rail along the longitudinal axis, centered, for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical steel grid loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, loading ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side panels in an RAL color tone available at extra cost
----Information:
Lrodpjrvvflefx Alasl
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. calendar week 29/2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer unit
----Drawbar / Flange Tow Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange tow eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General Attachments:
* Landing gear at the front
* Fold-out stabilizer legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside at the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* At the front bulkhead and rear incline, provision for retrofitting container locks for transporting 20'' containers
* Bolted bulkhead made of smooth sheet metal
* Drop-side walls made of trapezoidal steel sheet, central split, folding
* Steel rear wall - insertable between the ramp mounts, can be stowed inside at the front bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each corner, front and rear
* Various holes in the front and end cross-members for 1.2 t lashing options
* Profifix lashing rail, centrally along longitudinal axis, for securing up to LC 3000 daN
----Ramps:
* One-piece mechanical mesh ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm)
* Rear approach angle, approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140
----Paintwork:
* Drawbar, bulkhead, rear flap, folding legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange tow eye and landing gear painted black
* Side walls painted to RAL color of choice (excluding special or metallic colors), changeable up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer's warranty
Lsdpfev Eq Evjx Alajrl
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
Lsdpfx Alsv D Tcboaorl
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General Attachments:
* Support winch at the front
* Fold-out external support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers
* Bolted smooth steel bulkhead
* Side walls made of trapezoidal steel sheet, split and foldable once in the center
* Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing eyes at 600 mm intervals
* In each front and rear corner: one 6.3 t lashing ring
* Multiple holes for 1.2 t lashing options in front and rear crossmember
* Profifix lashing rail along centerline for lashing up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness)
* Rear approach angle approximately 860 mm on chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic brake system (EBS)
* Emergency release device for spring-actuated cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
Lrjdpfjxglibox Alasl
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right exterior on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Lowbed Platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted smooth steel front wall
* Drop sidewalls made of trapezoidal profiled steel, foldable with drop-side spring assist
* Steel rear wall, retractable between the ramps (storage bracket in front of the front wall when not in use)
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various drill holes in the front and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, drive-on ramps, and rear wall
* Drop sidewall color in RAL 9010 pure white
* Custom sidewall color in any RAL shade available at extra charge
----Information:
* --Reinforced and certified body to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery Time:
* Available from approx. CW 27/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Draw Eye:
* Height-adjustable drawbar by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange draw eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
Lredpfx Aexglh Rslaol
* Jost landing gear at the front
* Outward-facing hot-dip galvanized foldable support legs at the rear
* Plastic toolbox front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down trapezoidal-profiled steel side walls with drop-side spring assist
* Steel rear wall insertable between the ramps, holder for non-use inside in front of the bulkhead
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various bores in the front and rear crossmember for 1.2 t lashing options
----Ramps:
* Single-piece mechanical grid ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Rear drive-on slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side walls in a RAL color available at extra charge
----Information:
* --Reinforced and certified body to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 27/2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu yarı römork
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0:
----Braking System:
* Wabco EBS-E (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11-ton BPW axles
* Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required)
* The last axle as a self-steering trailing axle with electro-pneumatic steering lock
Lrjdpfsykx Nkjx Alasl
* Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required)
----Suspension:
* Air suspension with lift and lower function as well as Ride height control valve
----Electrical / Lighting:
* Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12/24 V
* Removable LED rotating beacon at the rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for extended length lighting
* Side marker lights with indicator function
* Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Side underrun protection
* Landing gears at the front and swiveling supports at the rear of the chassis
* Straight sheet steel mudguards
* Spare wheel holder in front of the bulkhead cross member (without spare wheel)
* Mechanically adjustable warning sign packages at the front and rear
* Swivel arm as carrier for connection lines from truck to trailer
----Low Loader Platform:
* 2nd kingpin position
* Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid
* 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform
* Rear wall —150 mm— plugged in high
* Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps
* Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards
* Checker plate over the axles
* 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform
* Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses
* Preparation for container locks on the gooseneck
----Load Securing (LaSi Package):
Fifth Wheel Platform:
* Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm)
* 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam)
Low Loader Platform:
* 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope)
* 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle)
* 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess)
----Excavator Arm Rest:
* Extended excavator arm rest from end of last
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required)
* Rear axle as self-steering axle with electro-pneumatic steering lock
* Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required)
----Suspension:
* Air suspension with lift and lower function and RTR valve
----Electrics / Lighting:
* Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at the rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for length extension lighting
* Side marker lamps with indicator function
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
----General Attachments:
* Side underrun protection
* Support winds at the front and swiveling supports at the rear on the chassis
* Straight steel mudguards
* Spare wheel holder in front of the front wall crossmember (without spare wheel)
* Mechanically adjustable warning sign packages front and rear
Lsdpfx Ajykx Nqelajrl
* Swivel arm as a carrier for connection cables from the truck to the semi-trailer
----Lowbed Deck:
* 2nd kingpin position
* Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid
* 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable
* Rear wall insertable, 150 mm high
* Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps
* Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks
* Tear plate over the axles
* 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area)
* Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers
* Preparation for container locks on the swan neck
----Load securing (LaSi package):
Fifth wheel platform:
* Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm)
* 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam)
Lowbed platform:
* 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope)
* 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles)
* 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well)
----Excavator boom support:
* Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brake System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flange Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12/24 V
* 15-pin socket
----General Attachments:
* Jost landing gear at front
* Externally mounted, hot-dip galvanized folding supports at the rear
Ledoq Dyvyspfx Alajrl
* Plastic toolbox at the front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* 50 mm softwood flooring
* Fitting for retrofitting container locks in front of the front wall
* Bolted front wall made from smooth steel sheet
* Side walls made from profiled sheet steel, foldable with drop-side spring assistance
* Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use
* Rear stakes bolted
* Beveled rear drive-on angle approx. 860 mm
----Load Securing:
* Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 6.3 t lashing eye at each front and rear corner
* Various holes in front and rear cross-member for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Drop-side color in RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra charge
----Information:
* -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate --
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* RDÜ (Tire Pressure Monitoring System)
* LED taillights 12/24 V
* 15-pin electric connector
----General Attachments:
* Jost landing gear at front
* External hot-dip galvanized folding support legs at rear
* Plastic toolbox, front right outside on front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed loading area:
* 50 mm softwood floor
* Preparation in front of bulkhead for later installation of container locks
* Bolt-on smooth steel front wall
* Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device
* Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead
* Bolt-on rear stanchions
* Rear approach angle approx. 860 mm
----Load securing:
Lsdspk Dv Ropfx Alaorl
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Provision for fitting 3 t lashing rings every 600 mm
* In each corner at front and rear: 1 x 6.3 t lashing ring
* Various drilled holes for 1.2 t lashing points in front and rear crossmembers
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width)
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps
* Drop side color in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
----Info:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALPT40 Sonderpreis, Tieflader mit hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lift and lower system and RtR valve
* Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits)
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle: plastic quarter mudguards with splash protection
* Rear axle: straight, galvanized steel sheet skirts with splash protection
* Reflective contour tape on the sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12/24 V
* Removable LED rotating beacon at the rear
* 2 LED reversing lights (activated by reverse gear)
* Drawbar with 50 mm towing eye and height adjustment
* Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Front extension in front of the turntable platform, approx. 490 mm long with 45° corners
* ROBOT-welded anti-slip covering on the steel plate of the turntable platform
* Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option
* Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel)
* Beam holder for extensions under the chassis on the left, longitudinally
* Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder
* Hardwood floor on the running surfaces of the low-loader platform
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally
* Outer beams of the loading ramps made of hardwood
* Steel construction prepared for 6-control valve block
* Loading edge unloaded approx. 950 mm +/- 20 mm chassis
* Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized
* --Axles, air tank, drawbar painted in a black tone--
Lsdpel Tlhrefx Alaerl
* Tyres 235/75 R 17.5
* Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALPT 40 Sonderpreis, Tieflader mit hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lifting and lowering system, including RtR valve
* Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits)
* Side underrun protection
* Swing-out support legs at the rear of the chassis frame
* Mechanically adjustable warning sign kits at front and rear
* Front axle: plastic quarter mudguards with splash protection
* Rear axle: straight galvanized steel mud flaps with splash protection
* Reflective contour tape on sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12 / 24 V
Ledpel Tnu Ajfx Alaorl
* Removable LED beacon at the rear
* 2 LED reversing lights (activated via reverse gear)
* Drawbar with 50 mm towing eye and height adjustment
* Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Extension in front of the turntable platform, approx. 490 mm long with 45° corners
* Robot-welded anti-slip covering on the steel plate of the turntable platform
* Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility
* Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area)
* Plank holder for extensions under the chassis left, longitudinal orientation
* Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest
* Hardwood flooring on the running surfaces of the low loader platform
* Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable
* Outer planks of the loading ramps made of hardwood
* Steel structure pre-manufactured for 6-way control valve
* Loading edge height unladen approx. 950 mm +/- 20 mm chassis
* Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized
* --Axles, air tanks, drawbar painted in black--
* Tyres: 235/75 R 17.5
* The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available immediately ex Egestorf
Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller MitteltalKA-TA-RT 18,0 18 t Tandemkipper- Tieflader
Çağrı
Koşul: ikinci el, boş ağırlık: 4.190 kg, azami yük ağırlığı: 13.810 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2016, süspansiyon: hava, lastik boyutu: 385/55R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R22,5 160J, arka lastik boyutu: 385/55R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, 800 mm alüminyum yan duvarlar, rampalar için ek ücret 800 €, -- yazım hataları, değişiklik ve yanlışlık yapma hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: !
Lredpey Uanwofx Alael
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Çağrı
Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: !
Lrodpfxey Tln Te Alasl
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: !
Lodpfjy Tll Sox Alaorl
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Schwebheim
2.317 km
Üç yöne devirmeli römork
Müller Mitteltalka-ta-r 14,4 14,4 t Tandemkipper- Tieflader, Breitbereift
Çağrı
Koşul: ikinci el, boş ağırlık: 3.550 kg, azami yük ağırlığı: 10.850 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2012, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 150J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 150J, arka lastik boyutu: 385/55R19,5 150J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, geniş lastik donanımı, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla bilgi için: !, Detaylar: !
Lredoy R Dgiepfx Alael
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: !
Lodpfx Ajy Ryb Nolaorl
Küçük ilan
Schwebheim
2.317 km
Damperli treyler
Müller MitteltalKA-TA-T 13,5 t Tandemkipper- Tieflader
Çağrı
Koşul: ikinci el, boş ağırlık: 3.320 kg, azami yük ağırlığı: 10.180 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2003, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 5.040 mm, süspansiyon: çelik, lastik boyutu: 285/70R19,5 148/145J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 285/70R19,5 148/145J, arka lastik boyutu: 285/70R19,5 148/145J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, , Rampalar için ek ücret: 800 €, , -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !,
Ledpfsy Rr I Ijx Alasrl
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Çağrı
Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: !
Lrodpfx Aljy Rr Ihjajl
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal tieflader mit radmulden langerampen"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 858 95 507
+49 201 858 95 507
Şimdi ilan ver
*ilan başına/ay







































































































































































































































































































































































































































