Kullanılmış Schwarzmüller Alçak Yükleyici satın al (282)

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 24.000 kg, boş ağırlık: 6.500 kg, azami yük ağırlığı: 17.500 kg, renk: gümüş, Üretim yılı: 2004, Donanım: ABS, Fully galvanized, hydraulic ramps Dcjdjwtqmbepfx Ah Njn

Durumu: kullanılmış, toplam ağırlık: 24.000 kg, boş ağırlık: 7.200 kg, azami yük ağırlığı: 16.800 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2012, süspansiyon: çelik, lastik boyutu: 235/75 R17.5, Donanım: ABS, kamyon kaydı, Schwarzmüller G-Serisi alçak şasi treyler - 3 dingil | Lastikler: 235/75 R17.5 | Boş ağırlık: 7.200 kg | Taşıma kapasitesi: 16.800 kg | Çift tekerlekli | Dingil mesafesi: 5135/1410 mm | Toplam uzunluk: 11.280 mm, genişlik: 2.550 mm | Yükleme alanı: yaklaşık 8,7 m | Hata, yazım hatası ve ön satış hakkı saklıdır. Dcjdpfxsxl D E Eo Ah Non

Durumu: yeni, toplam ağırlık: 36.700 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Schwarzmüller RH240 Jumbo Flatbed Semi-Trailer Low Loader Extendable, telescopic – for building material and construction machinery transport – NEW – UNUSED – Gross vehicle weight: 36,000 kg Unladen weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in low bed, unladen, approx. 830 mm Frame: Extendable central frame welded construction Extension length: 6,000 mm Pneumatically lockable, operated on the trailer + additional position for 40ft container in the low bed Dcodpju A Nilofx Ah Nsn Reinforced design for building material transport, rated for 20 t over 5 m at center of gravity and for construction machinery transport up to 20 t Frame suitable for transporting wooden components measuring approx. L/W/H 13,000/575/3,200 mm Reinforced frame for point loads front and rear at support block Reinforced outer frame in gooseneck area: 6 mm Reinforced outer frame in low bed: 6 mm Tapered cross members Sliding intermediate support approx. 300 mm (non-removable), mechanically lockable, designed as stanchion pocket cross member for square tube stanchions 80x80 mm, plus 1 pair 5 t lashing rings integrated on the outer part of the intermediate support Frame for 2-axle tractor units and fifth wheel height unladen approx. 960 mm - 1,020 mm with air-suspended tractor 3 pairs front and 10 pairs rear of 10 t lashing rings, extendable on each side of the outer frame, fold-out for oversize load strapping 10 pairs of lashing mushrooms with welded round steel at the bottom of the outer frame Frame attachments: 10 pairs of plug-in brackets with reinforcement beams for 80x80 mm square stanchions, both sides of outer frame 6 stanchion pocket crossbeams for 80x80 mm square stanchions 24 steel square tube stanchions, 80 x 80 x 5 mm, usable height approx. 2,000 mm, with lashing holes on top for straps, hot-dip galvanized 3 pairs of container locks in the low-bed platform, retractable, for: 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile ramp rail at rear end of frame Support device: Mechanical steel landing gears, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electropneumatic reverse lock automatically activated via reverse gear Last axle is trailing steered Braking system/suspension: Wabco brake system Brake/air connections with 2 single coupling heads yellow/red EBS/ABS socket at front Air suspension with lift and lower device, total lift approx. 200 mm Automatic ride height adjustment from 15 km/h Assistance/safety systems: Standard reporting interval Every 15 minutes with ignition on Every 24 hours with ignition off Axle load indication via EBS-CAN bus signal for display in driver's cab (truck must be pre-equipped) Wabco SmartBoard for reading data via display (odometer, axle module load, brake diagnostics, etc.) Floor: 35 mm larch timber floor, impregnated on both sides, laid lengthwise with small gaps, over wheels with steel chequer plate cover Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 center supports 2 front corner pillars, integrated in front wall, bolted at face end 2 lashing eyes each at top of front corner pillars At goo

Durumu: kullanılmış, toplam ağırlık: 32.000 kg, azami yük ağırlığı: 25.360 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.000 mm, yükleme alanı genişliği: 2.550 mm, ilk tescil: 04/2012, bir sonraki muayene (TÜV): 06/2026, * Schwarzmüller F-Series Low Loader * First Registration: 2012 * 2 Axles * Air Suspension * Drum Brakes * Central Lubrication System * SAF Axles * 2nd Axle with Steering Capability * Aluminium Loading Ramps * New Tyres on 2nd Axle Dcedpfjw E Axaex Ah Nsn * TÜV valid until June 2026 * Safety Inspection (SP) until December 2025 * Unladen Weight: 6,640 kg * Permissible Total Weight: 32,000 kg * Dimensions: * Loading Length (bottom): 8.0 m at 0.90 m loading height * Loading Length (top): 4.0 m at 1.50 m loading height * Loading Width: 2.55 m * Total Length: 12.30 m * With 3-axle tractor unit: overall length only 16.50 m

Durumu: kullanılmış, toplam ağırlık: 40.000 kg, azami yük ağırlığı: 30.380 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2011, Donanım: ABS, Vehicle Identification Number: VAVX99448BH301318 Including aluminum ramps – 2,800 mm long, 400 mm wide Unladen weight: 9,620 kg German inspection (HU) valid until 01/2025 – Safety inspection (SP) until 06/2024 Gooseneck: 4,000 mm Low bed: Length: 8,620 mm – Width: 2,550 mm – Loading height: 930 mm Removable rails Support system Width extension lighting Maximum king pin load (front): 12,000 kg Swing radius: front 2,100 mm – rear 1,900 mm Technical axle loads: 4 x 7,000 kg BPW Eco Plus axles with drum brakes Axle 1 = liftable Axles 3 + 4 = steering axles 2 x toolboxes Tyres: 245/70 R 17.5 Subject to change, prior sale, and errors excepted. The description serves general identification purposes and does not constitute a warranty in terms of sales law. The definitive description is that stated in the sales contract. Dcedpfx Aott U D Doh Nen Our offer is generally without new MOT (TÜV) approval. Should you require a new MOT, we are happy to offer this through our partner workshops. Vehicle may be affixed with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Durumu: kullanılmış, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.550 mm, ilk tescil: 12/2022, Üretim yılı: 2022, toplam genişlik: 2.550 mm, Donanım: ABS, SAF axles, Hydraulic ramps, open front platform, mud flaps, air suspension, lift/lower function, spare wheel, additional headlights, warning signs, and much more. Tyres: Axle Position Size Manufacturer Type Tread depth 1 Left outside 345/70R17.5 Continental 10.0 mm 1 Left inside 345/70R17.5 Continental 10.0 mm 1 Right inside 345/70R17.5 Continental 10.0 mm 1 Right outside 345/70R17.5 Continental 10.0 mm 2 Left outside 345/70R17.5 Continental 10.0 mm Dcjdpou Uzv Ejfx Ah Nsn 2 Left inside 345/70R17.5 Continental 10.0 mm 2 Right inside 345/70R17.5 Continental 10.0 mm 2 Right outside 345/70R17.5 Continental 10.0 mm 3 Left outside 345/70R17.5 Continental 11.0 mm 3 Left inside 345/70R17.5 Continental 11.0 mm 3 Right inside 345/70R17.5 Continental 11.0 mm 3 Right outside 345/70R17.5 Continental 11.0 mm 4 Left outside 345/70R17.5 Continental 10.0 mm 4 Left inside 345/70R17.5 Continental 10.0 mm 4 Right inside 345/70R17.5 Continental 10.0 mm 4 Right outside 345/70R17.5 Continental 10.0 mm Export license plates and insurance can be provided at extra cost upon request! For export transactions, we can handle the export declaration and registration for you for a fee. For exports to non-EU countries, a security deposit of 19% of the purchase price will be withheld. This deposit will be refunded to the buyer after successful customs clearance or delivery. For further information, please contact Mr. Lübberding by mobile/WhatsApp. Always schedule an appointment for inspection or a test drive! Just drop in and have a look. We look forward to your visit. ----The information provided online is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors, changes, input errors, or mistakes. Subject to prior sale.

Durumu: yeni, toplam ağırlık: 30.000 kg, azami yük ağırlığı: 23.800 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details available upon request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners chamfered * Approx. 5,350 mm = low-bed platform - flat loading area * Approx. 850 mm = rear drive-on slope * Total width approx. 2,550 mm (approx. 3,000 mm with extensions) * Loading height when loaded approx. 870 mm * When coupling with a tractor, please observe the legally permissible overall height and total combination length! Frame: * Steel welded construction with front gooseneck and rear chamfer * Drive-on slope with excavator bucket recess center = depression at rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing rings (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the low-bed, 1x in the drive-on slope, 2x on the raised platform) * Standard ball race turntable Frame attachments: * Both sides of the low-bed platform with extendable extensions with softwood planks approx. 50 mm (Track width of the construction equipment to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding 10 t lashing rings, arrangement: 1 pair at the front on the raised platform within the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the gooseneck within the longitudinal beams, 1 pair in the low-bed at the rear before the drive-on slope, in the bucket recess left + right Drawbar: * Fixed drawbar with swiveling towing eye approx. 40 + 50 mm, cranked design, silent block bushing, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 automatic folding rear supports Dcsdpfx Ahowx Dcye Nsn Axles: * 3 SAF air-suspension low-loader axles with drum brakes * Axle load capacity 11 t/axle * S-cam brake approx. 300/200 mm * Automatic slack adjusters Wheels: * 12 tyres 235/75 R 17.5, 141J, manufacturer depending on factory choice * 12 steel rims 6.75 x 17.5, with offset, silver Brake/floating system: * Two-line compressed-air braking system according to ECE - Regulation R13 * Wabco brand brake system * EBS system 4S3M, 1st & 2nd axle with sensors * RSS/RSP - stability program * Spring-loaded parking brake on 2nd and 3rd axle * Steel air reservoir * Brake/air connection pipes with 2 individual coupling heads, yellow/red * EBS/ABS connecting cable * Tension rubber as mount for EBS and electric plugs * Air suspension with lifting and lowering device (rear axles only), automatic driving height adjustment from 15 km/h (RTR), front axle with axle stop Floor: * Softwood floor, approx. 50 mm impregnated, protruding approx. 5-10 mm over upper edge of the frame, steel chequer plate cover over the wheels Ramps: * 2 folding single-section lightweight steel drive-on ramps, length approx. 2,800 mm, width approx. 750 mm, with impregnated hardwood deck approx. 35 mm * Ramps adjustable in width from 350 mm intermediate distance up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioner * Ramp lifting aid with spiral spring * Ramps ca

Durumu: kullanılmış, toplam ağırlık: 54.000 kg, azami yük ağırlığı: 42.200 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, Donanım: ABS, Safety * Anti-lock Braking System (ABS) Exterior * Air suspension (air/air) * Toolbox * 1x15-pin connector * Twin tyres Additional Equipment * Schwarzmüller 3-axle jumbo flatbed semi-trailer RH240, low-bed with extendable central frame with double locking, extension length approx. 6,000 mm, hydraulically steered, SAF axles * Drum brakes, technical axle assembly load 36t, all 3 axles with hydraulic forced steering, Orlaco reversing camera, 2 extendable warning boards for oversized width up to 4,000 mm, mounting bracket for Altec ramps 16.8 t/pair, front bed length 4,050 mm, rear bed length 8,950 mm + 6,000 mm Dsdpfx Aewcin Noh Nscn Other Dimensions and Weights * Payload: 42,200 kg * Gross vehicle weight rating: 54,000 kg

Durumu: kullanılmış, toplam ağırlık: 36.000 kg, azami yük ağırlığı: 25.660 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, Üretim yılı: 2022, Donanım: ABS, Schwarzmüller RH240 Jumbo Flatbed Semi-Trailer Low Loader telescopically extendable – for building materials and construction machinery transport – As-new condition – GVWR: 36,000 kg Unladen weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in lowbed unloaded approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Djdpfx Aju A Nhneh Njcn Pneumatically lockable, operated from the trailer + extra position for 40ft container in lowbed Reinforced version for construction material transport, rated for 20 t over 5 m at the center of gravity, and for construction machinery transport up to 20 t Frame suitable for transporting timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads front and rear at bearing blocks Reinforced outer frame in gooseneck area, 6 mm Reinforced outer frame in lowbed area, 6 mm Tapered cross beams Adjustable intermediate platform approx. 300 mm (non-removable), mechanically lockable, designed as stake pocket crossmember for 80x80 mm section stakes, plus 1 pair of 5 t lashing rings integrated on the outside of the intermediate platform Frame suitable for 2-axle tractor units and coupling height unladen approx. 960 mm – 1,020 mm with air-suspension tractor unit Front: 3 pairs and rear: 10 pairs of 10 t lashing rings, retractable into outer frame, both sides, also folding outwards for oversize load securing 10 pairs of lashing mushrooms with welded round steel on lower outer frame Frame attachments: 10 pairs of plug-in sockets with reinforcing beams for 80x80 mm section stakes, on both sides of the outer frame 6 stake pocket crossmembers for 80x80 mm section stakes 24 steel box section side stakes 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes at the top for tensioning straps, hot-dip galvanized 3 pairs of container locks recessed in the lowbed platform for: 1x 20ft container 1x 30ft container 1x 40ft container (when extended) U-profile ramp guide at frame end Support equipment: Mechanical steel support winches, 2 x 12 t 2 fall supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated when reversing Last axle is trailing and steered Brake system/Suspension: Brake system by Wabco Brake/air connections with 2 single couplings (yellow/red), EBS/ABS socket at front Air suspension with lift and lower function, total travel approx. 200 mm Automatic adjustment to programmed ride height at speeds from 15 km/h Assistance/Safety systems: Standard transmission interval: every 15 minutes with ignition on every 24 hours with ignition off Axle load indicator via EBS CAN bus signal for display in the driver’s cab (truck must be pre-equipped) Wabco SmartBoard for data readout via display (mileage, axle module load, brake diagnostics, etc.) Floor: 35 mm larch wood floor, impregnated on both sides, longitudinally installed with small expansion gaps, above the wheels covered with steel tread plate Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 center supports 2 front corner posts integrated into the front wall, bolted at the front end 2 lashing eye

Durumu: kullanılmış, toplam ağırlık: 41.500 kg, boş ağırlık: 7.660 kg, azami yük ağırlığı: 33.840 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.800 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 920 mm, ilk tescil: 02/2001, süspansiyon: hava, renk: siyah, lastik boyutu: 235 / 75 R 17,5, kilometre: 1.001 km, vites türü: diğer, toplam uzunluk: 2.550 mm, toplam genişlik: 2.800 mm, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, 1st axle liftable, last axle with trailing steering, lifting and lowering function, ABS (anti-lock braking system), lashing eyes, support legs, twin tires, storage box. Fifth wheel height: 1350 mm, loading height: 920 mm, loading length over axles approx. 8700 mm, loading length over king pin approx. 4000 mm, neck height approx. 625 mm, prepared for beacon light, 800 mm folding side walls, 6 pairs of lashing rings on the outer frame of the low bed, 6 x twist locks on the loading platform, extendable warning signs front and rear up to 3500 mm, saddle measurement from bulkhead to king pin: 1750 mm, approx. EUR 3,000 invested in maintenance! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to alterations, prior sale, and errors excepted! Dcsdswcpcgspfx Ah Njn

Durumu: yeni, toplam ağırlık: 40.000 kg, azami yük ağırlığı: 30.860 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Steel welded construction with front frame cranking, front corners chamfered and chamfered at the rear, drive-on incline with centrally positioned excavator bucket recess = lowered section at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front cranked section, 3x in the low bed between the wheel recesses, and 1x in the drive-on incline) 2 pairs of wheel recesses: Dsdpfx Ajwx Ddqeh Necn * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), positioned behind the cranking, including single-piece drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/unit * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle including single-piece drive-over aluminum cover, suitable for transporting wheel loaders with a wheelbase of approx. 2,700–3,600 mm and a wheel diameter of approx. 1,485–1,740 mm * Maximum rear overhang for wheel loader: 2,220 mm * Width between the wheel recesses: approx. 1,255 mm (= outer/outer longitudinal beams) * Reinforced slewing ring for a total weight of 44 t Chassis attachments: * 5 pairs of stake pockets in the outer frame for box-section stakes approx. 100 x 50 x 5 mm (3x in the lowbed and 2x on the raised platform) * 4 pairs of foldable approx. 10 t lashing rings, division: 1 pair at the front of the raised platform, within the longitudinal beams; 1 pair right at the rear in the excavator bucket recess (left/right); 1 pair at the front of the raised platform before the cranking, within the longitudinal beams; 1 pair at the rear of the lowbed before the drive-on incline in the excavator bucket recess (left/right) Towing device: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support device: * 2 hydraulic rear supports – individually operable, controls installed in separate stainless steel box underneath Axles: * SAF low loader air suspension axles with drum brakes, load capacity approx. 11 t/axle * S-cam brake approx. 300/200 mm * Automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 * 16 steel rims 6.75 x 17.5, with offset, black painted * Black plastic wheel nut covers Brake/Suspension system: * Dual-circuit air brake system compliant with ECE regulation R13 * Braking system by Wabco * EBS system 4S3M, 1st and 3rd axle monitored * RSS/RSP – stability program * Spring-actuated parking brake on 3rd and 4th axle * Aluminium air tanks * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Rubber strap as holder for EBS and electrical connectors * Air suspension with separate lifting and lowering controls front and rear, automatic adjustment to programmed ride height from 15 km/h Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5–10 mm above the top edge of the frame * Steel checker plate cover over rear wheels Ramps: * 2 folding, 2-piece steel loading ramps, hydraulically foldable, gradient approx. 10 degrees, length

Durumu: kullanılmış, toplam ağırlık: 39.000 kg, azami yük ağırlığı: 25.160 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.840 mm, yükleme alanı genişliği: 2.550 mm, ilk tescil: 09/2016, Üretim yılı: 2016, toplam genişlik: 2.550 mm, Donanım: ABS, Schwarzmüller G-Serisi platform dorse, ilk tescil: 30.09.2016, Lastik ebadı: 435/50R 19,5, Her biri iki kilitleme koluna sahip alüminyum arka kapılar, Stepne taşıyıcı, Disk frenler, Yedek parça için plastik kutu, Net ağırlık: 13.840 kg, Teknik olarak izin verilen toplam ağırlık: 39.000 kg Römork ölçüleri: 13.840 / 2.550 / . . . . . . . Kaldırılabilir tavan ve iki palet sırası yükleme imkanı, Palet taşıyıcı, İyi teknik durumda, Dcedpfx Ahsxgqucs Nen KDV hariç fiyat.

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 36.000 kg, boş ağırlık: 7.720 kg, azami yük ağırlığı: 28.280 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.060 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.750 mm, süspansiyon: hava, renk: gri, Üretim yılı: 2021, Moving floor semi-trailer Schwarzmüller / 2021 / 4 units Year of manufacture: 2021 Technical Specifications: GVW: 36,000 kg Curb weight: 7,720 kg Payload: 28,280 kg Internal dimensions: Length: 13.06 m Width: 2.47 m Height: 2.75 m 3 SAF axles Air suspension 1st axle liftable JOST landing gears Spare wheel holder The trailer is in excellent technical and visual condition. Dedpfxsxlhm Te Ah Nscn 4 identical trailers available in this offer.

Durumu: kullanılmış, toplam ağırlık: 34.000 kg, boş ağırlık: 7.150 kg, azami yük ağırlığı: 26.850 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı yüksekliği: 3.000 mm, ilk tescil: 11/2008, süspansiyon: hava, renk: gümüş, lastik boyutu: 435/50 19,5, toplam uzunluk: 2.550 mm, toplam genişlik: 40.000 mm, Donanım: ABS, | Schwarzmüller Mega brandalı dorse | Kayar brandalı | ABS | Edscha tavan sistemi | Coil havuzu | İç yükseklik 3,00 m | Mercedes akslar | Lastikler 435/50R19,5 | Avusturya aracı | Hata, bilgi giriş hatası ve ön satış hakkı saklıdır Dcsdpfsxhi E Nex Ah Non

Durumu: kullanılmış, toplam ağırlık: 27.000 kg, boş ağırlık: 6.180 kg, azami yük ağırlığı: 20.820 kg, dingil konfigürasyonu: 3 dingil, dingil mesafesi: 5.940 mm, yükleme alanı hacmi: 27 m³, ilk tescil: 09/2025, süspansiyon: hava, renk: siyah, lastik boyutu: 385/65 R22,5, kilometre: 1.000 km, vites türü: mekanik, şehir içi yakıt tüketimi: 897 l/100 km, toplam uzunluk: 8.970 mm, kaldırma yüksekliği: 3.200 mm, Donanım: ABS, Boş ağırlık: 6.180 kg, azami toplam ağırlık: 27.000 kg, lastik ebadı: 385/65 R22.5, yükleme alanı hacmi: 27 m³, 1. dingil: , 2. dingil: , 3. dingil: , havalı süspansiyon, kaldırılabilir dingil, seviye ayarı, elektronik fren sistemi (EBS), brandalı sistem, hata ve değişiklik hakkı saklıdır. Tescilsiz yeni araç. Dedjxfmctepfx Ah Nscn

Durumu: kullanılmış, toplam ağırlık: 34.000 kg, yükleme alanı hacmi: 70 m³, ilk tescil: 11/2009, Donanım: ABS, Schwarzmüller tipper Year of manufacture: 2009 Capacity: 70 cubic meters Doors 2 gearbox sliders Unladen weight: 7,600 kg Disc brakes Phone: We are happy to assist you with financing or leasing options. EU sales: net price available upon provision of company documents and VAT number. Dedpfx Aowyr Dnjh Njcn VAT deposit: €1,000 We speak English Govorimo srpsko-hrvatski Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Overnight accommodation available - Transfer from Munich Airport or Passau train station Phone:

Durumu: kullanılmış, toplam ağırlık: 35.000 kg, azami yük ağırlığı: 29.050 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.640 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.780 mm, ilk tescil: 01/2008, Donanım: ABS, id: 850073 MULTILOCK, KALDIRMA AKSI Daha fazla bilgi için lütfen arayın: 420734511212 Dcedpfoxlmhvox Ah Non

Durumu: kullanılmış, toplam ağırlık: 34.000 kg, azami yük ağırlığı: 26.780 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 92 m³, ilk tescil: 05/2015, Üretim yılı: 2015, Donanım: ABS, Warzmüller J-SERIE, 2015. Lastik ebadı: 385/65 R 22,5, çok iyi durumda. Toplam ağırlık: 34.000 kg. Boş ağırlık: 7.220 kg. Taşıma kapasitesi: 26.780 kg. Dcedpfjxdgtiex Ah Nsn

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 36.000 kg, boş ağırlık: 7.720 kg, azami yük ağırlığı: 28.280 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.060 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.750 mm, süspansiyon: hava, renk: gri, Üretim yılı: 2022, Schwarzmüller Hareketli Zeminli Yarı Römork / 2022 Yıl 2022 Dcodexlf Axjpfx Ah Njn Teknik veriler Brüt ağırlık: 36.000 kg Ağırlık: 7.720 kg Yük kapasitesi: 28.280 kg İç ölçüler Uzunluk: 1.306 cm Genişlik: 247 cm Yükseklik: 275 cm 3 SAF aks Havalı süspansiyon 1. aks kaldırılabilir JOST dengeleyiciler Yedek lastik tutucusu Yarı römork teknik ve görsel olarak mükemmel durumdadır.

Durumu: kullanılmış, toplam ağırlık: 24.000 kg, boş ağırlık: 5.080 kg, azami yük ağırlığı: 18.920 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, bir sonraki muayene (TÜV): 11/2025, süspansiyon: hava, lastik boyutu: 265/70 R19,5, Donanım: ABS, Schwarzmüller N Serisi odun römorku | BPW akslar | Havalı süspansiyon | Lastikler: 385/65 R22,5 | İyi durumda | 4 çift yük direği | yaklaşık 6,60 m yükleme alanı | Tambur fren | Hata ve ön satış hakkı saklıdır. Dcodpfx Aexfgy Ssh Njn

Durumu: iyi (kullanılmış), toplam ağırlık: 18.000 kg, boş ağırlık: 2.450 kg, azami yük ağırlığı: 15.550 kg, yükleme alanı uzunluğu: 7.450 mm, ilk tescil: 08/2019, süspansiyon: hava, Donanım: ABS, ALMAN BAYİ sunuyor: BDF değiştirilebilir kasa römorku SICAK DİP GALVANİZLİ Geniş lastikler 445/45R19,5 Uzun hava körükleri BPW akslar Kampanalı fren Stokta çok sayıda şasi ve değiştirilebilir kasa mevcut! ##### ALMANYA GENELİ TESLİMAT İMKANI VARDIR! MEPO-TİCARİ ARAÇLAR 1983'TEN BERİ TESLİM EDİYOR! İNCELEME SADECE RANDEVU İLE! ##### Dcsdpfx Ajxlrkpjh Nsn

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 5.680 kg, azami yük ağırlığı: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 1 mm, ilk tescil: 11/2017, süspansiyon: hava, renk: gri, lastik boyutu: 385/55 R22.5, Üretim yılı: 2017, makine/araç numarası: VAVJS1339HD372158, Schwarzmüller yarı römork, Seri -G, ilk tescil tarihi - 03.11.2017, uzunluk - 13.840 mm, genişlik - 2.550 mm, lastik ebadı - 385/55R22.5, %80 diş derinliğiyle, teknik olarak izin verilen toplam ağırlık - 39.000 kg, yeni ithalat. Djdew Up S Djpfx Ah Necn

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 36.000 kg, azami yük ağırlığı: 28.280 kg, işletme ağırlığı: 7.720 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.060 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.750 mm, süspansiyon: hava, renk: gri, Üretim yılı: 2021, Moving floor semi-trailer Schwarzmüller / 2021 / 4 units Year of manufacture: 2021 Technical Specifications: GVW: 36,000 kg Curb weight: 7,720 kg Payload: 28,280 kg Internal dimensions: Dodpfxoxlfzuj Ah Njcn Length: 13.06 m Width: 2.47 m Height: 2.75 m 3 SAF axles Air suspension 1st axle liftable JOST landing gears Spare wheel holder The trailer is in excellent technical and visual condition. 4 identical trailers available in this offer.

Durumu: kullanılmış, toplam ağırlık: 31.000 kg, boş ağırlık: 6.680 kg, azami yük ağırlığı: 24.320 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, süspansiyon: hava kaldıracı, ön lastik ölçüsü: 425/65 R22.5, arka lastik boyutu: 445/65 R22.5, Donanım: ABS, Schwarzmüller damper gövde yaklaşık 25m³ | Ayakta platform | 1. kaldırılabilir aks | BPW akslar disk frenli | Lastikler: 1. aks 425/65 R22.5 | 2. aks 445/65 R22.5 | Hatalar ve ön satış hakkı saklıdır. Dodpjxdn E Tjfx Ah Nscn

Durumu: kullanılmış, toplam ağırlık: 39.000 kg, boş ağırlık: 5.740 kg, azami yük ağırlığı: 32.260 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2021, süspansiyon: hava, lastik boyutu: 385/65 R22.5, Donanım: ABS, Schwarzmüller 3 dingilli tomruk treyleri | Disk frenli SAF akslar | Boş ağırlık: 5.740 kg | Taşıma kapasitesi: 32.260 kg | Kaldırılabilir dingil | 8 adet yan direk çifti | Lastikler: 385/65 R22.5 | Geçerli muayene raporu 01/2026’ya kadar | Hata, giriş ve ön satış hakkı saklıdır. Dcodpfx Ahexdn Hdo Nsn