Alçak şasi römork

MÜLLER-MITTELTAL T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system Kedpfx Agol Thxasgofa * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign sets front and rear * Front: closed plastic mudguards; Rear: straight, galvanized steel fenders each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on turntable platform * Multi-voltage system * LED tail lights * Removable flashing beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with simultaneous lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for total width of 3 m (not at rear taper) * Widening planks stored in the center of the loading area * Excavator arm trough over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator trough) * Hydraulically operated one-piece ramps (approx. 3,000 x 720 mm) * Mechanical side-shifting of ramps * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (includes 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 09/2026

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at rear of chassis frame Kedpfol Thxdsx Aggsfa * Mechanically adjustable warning sign sets front and rear * Front: closed plastic mudguards; Rear: straight, galvanized steel fenders each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on turntable platform * Multi-voltage system * LED tail lights * Removable flashing beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with simultaneous lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for total width of 3 m (not at rear taper) * Widening planks stored in the center of the loading area * Excavator arm trough over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator trough) * Hydraulically operated one-piece ramps (approx. 3,000 x 720 mm) * Mechanical side-shifting of ramps * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (includes 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 09/2026