Açık dorseli römorkMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Açık dorseli römork
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
sabit fiyat KDV hariç
€29.900
(€35.581 brüt)
Üretim yılı
2025
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€29.900
(€35.581 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 10.500 kg
- Toplam ağırlık:
- 14.400 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 7.000 mm
- Yükleme alanı genişliği:
- 2.470 mm
- Yükleme alanı yüksekliği:
- 400 mm
Teklif detayları
- Listeleme kimliği:
- A104-27-108
- Referans no.:
- 6285a
- Son güncelleme tarihi:
- 08.07.2025
Açıklama
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Adjustable drawbar, height-adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin electrical connector
* LED lighting
* Front landing gear
* Outward-folding rear support legs
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter fenders
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Drop-side walls made of trapezoidal-profile steel sheet, center-split, foldable
* Rear wall in steel, retractable between ramps; holder for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45 degrees angled with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm – four lashing rings each side
* In each corner front and rear, one 6.3 t lashing ring
* Various holes for 1.2 t lashing possibilities in front and end crossmembers
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed down to 20 mm height)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and loading ramps hot-dip galvanized
Hsdpfxol Th Dfo Agcjw
* Axles, springs, air tank, drawbar eye, and landing gear painted in black tone
* Side wall paint color can be chosen freely until approx. 2 weeks before production date, except metallic or special colors
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Adjustable drawbar, height-adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin electrical connector
* LED lighting
* Front landing gear
* Outward-folding rear support legs
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter fenders
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Drop-side walls made of trapezoidal-profile steel sheet, center-split, foldable
* Rear wall in steel, retractable between ramps; holder for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45 degrees angled with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm – four lashing rings each side
* In each corner front and rear, one 6.3 t lashing ring
* Various holes for 1.2 t lashing possibilities in front and end crossmembers
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed down to 20 mm height)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and loading ramps hot-dip galvanized
Hsdpfxol Th Dfo Agcjw
* Axles, springs, air tank, drawbar eye, and landing gear painted in black tone
* Side wall paint color can be chosen freely until approx. 2 weeks before production date, except metallic or special colors
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu

















































