Çalışma platformlu römorkMÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
Çalışma platformlu römork
MÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
Sabit fiyat KDV dahil değil
€29.950
(€35.640 brüt)
Üretim yılı
2026
Koşul
Yeni
Konum
Egestorf 

Temel veriler
Fiyat ve Konum
Sabit fiyat KDV dahil değil
€29.950
(€35.640 brüt)
- Konum:
- Eichenstich 12, 21272 Egestorf, Deutschland

Çağrı
Teknik detaylar
- Azami yük ağırlığı:
- 14.660 kg
- Toplam ağırlık:
- 18.000 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 6.270 mm
- Yükleme alanı genişliği:
- 2.470 mm
- Yükleme alanı yüksekliği:
- 400 mm
Teklif detayları
- Liste kimliği:
- A104-27-186
- Referans No.:
- 58341
- Son güncelleme tarihi:
- 13.05.2026
Açıklama
ETÜ-TA-R 19.0:
----Brakes:
* Wabco EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs - 110 mm wide - with tandem equalizer system
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange eye and height-adjustable drawbar
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tyre monitoring system
----General Attachments:
* Jost landing gear at the front
* Outward folding supports at the rear
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Bolted splash wall made of smooth sheet metal
* Drop sides made of trapezoidal-profiled steel sheet, foldable with drop side spring assist
* Steel rear wall, can be inserted between the ramps – storage bracket inside at the front wall when not in use
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Provision for installing 3 t folding lashing rings every 600 mm
* In each front and rear corner: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing options
* Profifix lashing rail centrally along the longitudinal axis, for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm)
* Rear ramp approach angle approx. 860 mm
----Painting:
* Chassis, drawbar, splash wall, rear wall, ramps, and folding supports hot-dip galvanized
* Drop sides painted RAL 9010 pure white
* Painting of side walls in a RAL color shade available at extra charge
* Axles, springs, air tanks, flange eye, and landing gear painted in black
----Information:
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
* Sample images
Gedsl Th Hwspfx Akuoub
----Delivery time:
* Available approx. from CW 21/2026
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
----Brakes:
* Wabco EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs - 110 mm wide - with tandem equalizer system
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange eye and height-adjustable drawbar
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tyre monitoring system
----General Attachments:
* Jost landing gear at the front
* Outward folding supports at the rear
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Bolted splash wall made of smooth sheet metal
* Drop sides made of trapezoidal-profiled steel sheet, foldable with drop side spring assist
* Steel rear wall, can be inserted between the ramps – storage bracket inside at the front wall when not in use
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Provision for installing 3 t folding lashing rings every 600 mm
* In each front and rear corner: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing options
* Profifix lashing rail centrally along the longitudinal axis, for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm)
* Rear ramp approach angle approx. 860 mm
----Painting:
* Chassis, drawbar, splash wall, rear wall, ramps, and folding supports hot-dip galvanized
* Drop sides painted RAL 9010 pure white
* Painting of side walls in a RAL color shade available at extra charge
* Axles, springs, air tanks, flange eye, and landing gear painted in black
----Information:
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
* Sample images
Gedsl Th Hwspfx Akuoub
----Delivery time:
* Available approx. from CW 21/2026
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
Beri kayıtlı: 2001
172 çevrimiçi ilan
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu






























