Alçak şasi römorkMÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Alçak şasi römork
MÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
sabit fiyat KDV hariç
€29.900
(€35.581 brüt)
Üretim yılı
2025
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€29.900
(€35.581 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 10.900 kg
- Toplam ağırlık:
- 14.400 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 6.270 mm
- Yükleme alanı genişliği:
- 2.470 mm
- Yükleme alanı yüksekliği:
- 400 mm
Teklif detayları
- Listeleme kimliği:
- A128-69-180
- Referans no.:
- 6158
- Son güncelleme tarihi:
- 10.07.2025
Açıklama
* ETÜ-TA-R 14.4:
* RDÜ (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension
* Height-adjustable tow bar by approx. 300 mm; tow bar extension by 250 mm to 2,250 mm
* Jost landing gear at the front
* LED tail lights
Bdsdepk Dv Rjpfx Ah Hoi
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right side, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* Hot-dip galvanized chassis as well as tow bar, bulkhead, rear wall, tailgate, and loading ramps
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Drop side walls made from trapezoidal-profiled steel sheet, foldable with drop side spring assist
* Steel rear wall, can be stored between ramps; holder for unused rear wall inside at the bulkhead
* Bolted rear stanchions
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm; optional installation of 3 t recessed lashing rings every 600 mm; each corner at front and rear with one 6.3 t lashing ring; various holes for 1.2 t lashing points in bulkhead and rear crossmember
* Single-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 600 mm (retractable to 20 mm)
* Rear approach angle approx. 860 mm
* -- Reinforced and certified body to EN 12642 XL, including load-securing certificate --
* Drop side color in RAL 9010 pure white
* Painting of side walls in RAL color of your choice available at extra cost
* New vehicle with manufacturer’s warranty
* Errors and interim sale excepted
* Available immediately from Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* RDÜ (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension
* Height-adjustable tow bar by approx. 300 mm; tow bar extension by 250 mm to 2,250 mm
* Jost landing gear at the front
* LED tail lights
Bdsdepk Dv Rjpfx Ah Hoi
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right side, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* Hot-dip galvanized chassis as well as tow bar, bulkhead, rear wall, tailgate, and loading ramps
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Drop side walls made from trapezoidal-profiled steel sheet, foldable with drop side spring assist
* Steel rear wall, can be stored between ramps; holder for unused rear wall inside at the bulkhead
* Bolted rear stanchions
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm; optional installation of 3 t recessed lashing rings every 600 mm; each corner at front and rear with one 6.3 t lashing ring; various holes for 1.2 t lashing points in bulkhead and rear crossmember
* Single-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 600 mm (retractable to 20 mm)
* Rear approach angle approx. 860 mm
* -- Reinforced and certified body to EN 12642 XL, including load-securing certificate --
* Drop side color in RAL 9010 pure white
* Painting of side walls in RAL color of your choice available at extra cost
* New vehicle with manufacturer’s warranty
* Errors and interim sale excepted
* Available immediately from Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu
























































