Üç yöne devirmeli römorkMÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Üç yöne devirmeli römork
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
sabit fiyat KDV hariç
€26.500
(€31.535 brüt)
Üretim yılı
2024
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€26.500
(€31.535 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 8.780 kg
- Toplam ağırlık:
- 11.900 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 5.000 mm
- Yükleme alanı genişliği:
- 2.420 mm
- Yükleme alanı yüksekliği:
- 500 mm
Teklif detayları
- Listeleme kimliği:
- A128-69-375
- Referans no.:
- 6013
- Son güncelleme tarihi:
- 07.01.2026
Açıklama
* KA-TA-R 11.9 Masterline:
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
Bsdopk D D Ujpfx Abkecu
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
----Braking System:
* EBS brake system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Toolbox made from galvanized sheet steel on the right side
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* Bolt-on underrun protection with LED rear lights
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel
* Hot-dip galvanized chassis
Bsdopk D D Ujpfx Abkecu
* Fully galvanized steel three-way tipper body
* Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors
* Rear tailgate foldable and swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame
* 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks
* Lockable rear storage compartment recessed in the chassis beneath the loading area
----Tyres:
* 235/75 R 17.5 tires
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf, near the A7
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu























































