Alçak şasi römork

MÜLLER-MITTELTAL 14,4 to. Tandem Tieflader mit Auffahrrampen

Durumu: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing leg at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox front right, exterior of the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Side panels made from trapezoidal profile steel plate, foldable with sideboard assist spring * Rear wall made of steel, can be inserted between the ramps (bracket for storage provided inside in front of the bulkhead when not in use) * Rear stanchions bolted Cedervvfljpfx Ah Dsgn ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity at 480 mm intervals * Optionally, installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each corner at the front and rear * Various bores in front and end crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical steel mesh ramps with spring-assist, suitable for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall * Sideboard color RAL 9010 pure white * Side panel paintwork in any RAL color available for an additional charge ----Information: * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Durumu: yeni gibi (kullanılmış), kilometre: 113.000 km, Üretim yılı: 2021, FORD TRANSIT CUSTOM MAXI 2021 DIESEL HYBRID, ENGINE CAPACITY 2.0, 113,000 KM, TIMING BELT AND SERVICE JUST COMPLETED, AIR CONDITIONING, FACTORY STEREO, CRUISE CONTROL, PARKING SENSORS, ONE OWNER, 1-YEAR WARRANTY. FINANCING OPTIONS AVAILABLE. Cgjdpfxev H Dkhs Ah Den

Durumu: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Drawbar Eye: * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to total 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox mounted front right externally on the front wall * Side underrun protection Codpfexglibsx Ah Degn * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Pre-fitted for subsequent installation of container locks in front of bulkhead * Bolt-on smooth steel bulkhead * Side walls made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel tailgate, insertable between ramps (storage mount inside at front wall when not in use) * Removable rear stanchions, bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating ramps with spring assist for single-operator use, approx. 2,750 x 600 mm (can be compressed to within 20 mm) * Rear drive-up angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and tailgate * Drop side color in RAL 2011 deep orange * Painting of side walls in custom RAL color available at extra charge ----Information: * --Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Durumu: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: Cgsdpfx Aexglh Reh Den * Parabolic springs with compensating aggregate ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm, total 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (tyre pressure monitoring system) * LED lighting ----General Equipment: * Jost landing leg at the front * Externally mounted, hot-dip galvanized rear folding supports * Plastic toolbox at the front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Fixture in front of the bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Drop sides made of trapezoidal steel sheet, foldable with drop side spring assists * Rear wall made of steel, retractable between the ramps – storage bracket when not in use in front of the bulkhead * Rear stanchions bolted ----Load Securing: * Perforated outer frame angled approx. 45° with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each corner at the front and rear * Various holes in front and rear crossmembers for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together down to 20 mm) * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear panel * Drop side colour RAL 2011 deep orange * Optionally, side panels can be painted in any RAL colour at extra charge ----Info: * --Reinforced and certified bodywork according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to alterations and prior sale ----Delivery time: * available from CW 08/2026 (week 8/2026)

Durumu: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Drawbar Eye: * Drawbar adjustable in height by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Load Area: Cjdpfxervvfwo Ah Dsgn * Load length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Front wall bolted from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with spring lifter * Rear wall made of steel, can be slid in between the ramp holders, stored in front when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, lashing force 2 t every 480 mm * Installation of foldable lashing rings with 3 t rating every 600 mm possible * In each corner front and rear: 1 x 6.3 t lashing point * Various bores in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Chassis, drawbar, front wall, rear wall, rear stakes, and ramps hot-dip galvanized * Drop side panels painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ----Notes: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: Available from CW (calendar week)

Durumu: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4: ----Braking system: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS tire pressure monitoring system * 15-pin electrical connector * LED lighting ----General fittings: * Landing gear (support winch) at the front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, front right, fitted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader platform: * 50 mm softwood flooring * Preparation in front of the front wall and at the rear slope for subsequent installation of container locks for transporting 20" containers * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, centre-split and foldable * Steel rear wall insertable between ramp brackets; can be stowed inside at front wall when not in use * Bolted rear stanchions ----Load securing: * Perforated external frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) Cgjdpfxjv Eq Evj Ah Den * Rear approach angle approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paint finish: * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tank, flange towing eye, and landing gear painted in black shade * Drop side boards painted RAL 9010 pure white * Side wall painting in an RAL color of choice possible at extra cost ----Information: * Reinforced and certified construction according to EN 12642 XL, incl. load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex location Egestorf on the A7

Durumu: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer assembly ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support windlass at the front * Externally mounted folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall * Side underrun protection * Plastic quarter fenders Csdpjv D Tcbefx Ah Dogn ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the front wall and rear incline for retrofitting container locks for transporting 20" containers * Bolted front wall made of smooth sheet metal * Drop-side walls made of trapezoidal-profile steel sheet, foldable, split in the middle (1x) * Steel rear wall, can be slid in and stored between the ramp mounts or in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, angled at about 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t drop-type lashing rings every 600 mm * In each corner at front and rear, 1 x 6.3 t lashing ring * Various holes in the front and end cross members for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear ramp angle approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paint Finish: * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support windlass painted in black * Sideboards painted in RAL 9010 pure white * Painting of side walls in RAL color of your choice at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex works Egestorf (A7 motorway)