Alçak şasi römorkMÜLLER-MITTELTAL
Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Alçak şasi römork
MÜLLER-MITTELTAL
Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
sabit fiyat KDV hariç
€49.950
(€59.440 brüt)
Üretim yılı
2024
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€49.950
(€59.440 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya
Ara
Teknik detaylar
- Toplam ağırlık:
- 21.000 kg
- Azami yük ağırlığı:
- 16.000 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 5.500 mm
- Yükleme alanı genişliği:
- 2.420 mm
- Yükleme alanı yüksekliği:
- 700 mm
Teklif detayları
- Listeleme kimliği:
- A154-46-713
- Referans no.:
- 6248a
- Son güncelleme tarihi:
- 10.07.2025
Açıklama
* KA-TA-RT 21.0 ML:
* Without ABS / EBS, approved for 40 km/h
* Spring-loaded parking brake, drum brakes
* Gigant axles
* Tandem equalization system with 100 mm wide parabolic springs
* Support winch at the front
* Mechanical drop-down supports at the rear
* Fixed, welded-in drawbar with a low-maintenance K80 ball hitch (adjustable by +77 mm / 33 mm via head plate), with raised bracket for connection lines
Hfodpfor Dpz Hex Aacsn
* 12 V 7 + 4 pin electrical wiring
* LED lighting system 12 / 24 V with protective grilles
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle
* Side marker lights with indicator activation
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Chassis made of fine-grain steel
* Steel pallet 3-way tipping body with M-Strong side walls (fixed front wall, continuous side walls - without central stanchions - swinging on mechanical central locking and mechanically foldable with drop-side spring lift)
* Hydraulic tailgate, 500 mm high, acts as hydraulic chute with a 115° opening angle
* 4 mm Hardox 450 steel floor
* Lashing rings: 1 x 7 t in each corner, plus 4 x 3 t each side, recessed and foldable
* Hot-dip galvanized 2-step access in front of the front wall (on driver’s side left)
* 1 pair aluminum loading ramps (10 t / pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles
* 2 ramp storage compartments at the rear, integrated into chassis; load securing according to EN 12642 XL
* Coupling height loaded approx. 530 mm, unloaded approx. 590 mm
* Bodywork painted in RAL 9010 pure white
* Chassis, drawbar, rear drop-down supports and underride protection all hot-dip galvanized
* Axles, air tanks, front support winch
* K80 hitch painted in black
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* Without ABS / EBS, approved for 40 km/h
* Spring-loaded parking brake, drum brakes
* Gigant axles
* Tandem equalization system with 100 mm wide parabolic springs
* Support winch at the front
* Mechanical drop-down supports at the rear
* Fixed, welded-in drawbar with a low-maintenance K80 ball hitch (adjustable by +77 mm / 33 mm via head plate), with raised bracket for connection lines
Hfodpfor Dpz Hex Aacsn
* 12 V 7 + 4 pin electrical wiring
* LED lighting system 12 / 24 V with protective grilles
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle
* Side marker lights with indicator activation
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Chassis made of fine-grain steel
* Steel pallet 3-way tipping body with M-Strong side walls (fixed front wall, continuous side walls - without central stanchions - swinging on mechanical central locking and mechanically foldable with drop-side spring lift)
* Hydraulic tailgate, 500 mm high, acts as hydraulic chute with a 115° opening angle
* 4 mm Hardox 450 steel floor
* Lashing rings: 1 x 7 t in each corner, plus 4 x 3 t each side, recessed and foldable
* Hot-dip galvanized 2-step access in front of the front wall (on driver’s side left)
* 1 pair aluminum loading ramps (10 t / pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles
* 2 ramp storage compartments at the rear, integrated into chassis; load securing according to EN 12642 XL
* Coupling height loaded approx. 530 mm, unloaded approx. 590 mm
* Bodywork painted in RAL 9010 pure white
* Chassis, drawbar, rear drop-down supports and underride protection all hot-dip galvanized
* Axles, air tanks, front support winch
* K80 hitch painted in black
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu