Diğerleri

Greifschaufel 2,00m

Durumu: kullanılmış, Üretim yılı: 1999, Taşıma kapasitesi: 19.990 kg Azami toplam ağırlık: 8.010 kg Fpsdjutw I Nepfx Ag Tob Ön lastiklerin durumu: 70 Arka lastiklerin durumu: 70 Ön lastikler: 245/70 R 17.5 Arka lastikler: 245/70 R 17.5 Daha fazla bilgi için lütfen PFEIFER GROUP ile iletişime geçiniz.

Durumu: yeni, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details available upon request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners chamfered * Approx. 5,350 mm = low-bed platform - flat loading area * Approx. 850 mm = rear drive-on slope * Total width approx. 2,550 mm (approx. 3,000 mm with extensions) * Loading height when loaded approx. 870 mm * When coupling with a tractor, please observe the legally permissible overall height and total combination length! Frame: * Steel welded construction with front gooseneck and rear chamfer * Drive-on slope with excavator bucket recess center = depression at rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing rings (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the low-bed, 1x in the drive-on slope, 2x on the raised platform) * Standard ball race turntable Frame attachments: * Both sides of the low-bed platform with extendable extensions with softwood planks approx. 50 mm (Track width of the construction equipment to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding 10 t lashing rings, arrangement: 1 pair at the front on the raised platform within the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the gooseneck within the longitudinal beams, 1 pair in the low-bed at the rear before the drive-on slope, in the bucket recess left + right Drawbar: * Fixed drawbar with swiveling towing eye approx. 40 + 50 mm, cranked design, silent block bushing, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 automatic folding rear supports Axles: * 3 SAF air-suspension low-loader axles with drum brakes * Axle load capacity 11 t/axle * S-cam brake approx. 300/200 mm * Automatic slack adjusters Wheels: * 12 tyres 235/75 R 17.5, 141J, manufacturer depending on factory choice * 12 steel rims 6.75 x 17.5, with offset, silver Brake/floating system: * Two-line compressed-air braking system according to ECE - Regulation R13 Fpodpfjwx Dcyox Ag Teb * Wabco brand brake system * EBS system 4S3M, 1st & 2nd axle with sensors * RSS/RSP - stability program * Spring-loaded parking brake on 2nd and 3rd axle * Steel air reservoir * Brake/air connection pipes with 2 individual coupling heads, yellow/red * EBS/ABS connecting cable * Tension rubber as mount for EBS and electric plugs * Air suspension with lifting and lowering device (rear axles only), automatic driving height adjustment from 15 km/h (RTR), front axle with axle stop Floor: * Softwood floor, approx. 50 mm impregnated, protruding approx. 5-10 mm over upper edge of the frame, steel chequer plate cover over the wheels Ramps: * 2 folding single-section lightweight steel drive-on ramps, length approx. 2,800 mm, width approx. 750 mm, with impregnated hardwood deck approx. 35 mm * Ramps adjustable in width from 350 mm intermediate distance up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioner * Ramp lifting aid with spiral spring * Ramps ca

Durumu: kullanılmış, makine/araç numarası: GE12/084/2023, boş ağırlık: 7.000 kg, azami yük ağırlığı: 17.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/1998, süspansiyon: çelik, Donanım: merkez döner tabla, Vehicle from first owner Goldhofer TU3-24/80 Low-bed trailer Service history maintained Inspection logbook Fpsdemx U Dpopfx Ag Teb Hydraulic ramps Payload - 17,000 kg Lashing eyes in the loading area Commercial/export net price - €9,990 Subject to change, prior sale, and errors excepted ===== Phone Mobile =====

Durumu: kullanılmış, boş ağırlık: 8.400 kg, azami yük ağırlığı: 15.600 kg, toplam ağırlık: 24.000 kg, ilk tescil: 08/1993, bir sonraki muayene (TÜV): 10/2022, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, lastik boyutu: 9.5R 17.5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 9.5R 17.5, arka lastik boyutu: 9.5R 17.5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Satış için irtibat kişiler: Frank Rau / Rusça / İngilizce / Almanca - Bachar Ibrahim / Arapça / İngilizce / Almanca - Kayıt hizmeti, periyodik muayene (HU/SP/UVV), limana sevk. Çok uzun YÜKSEME YÜZEYİ. 10,00 m! Hidrolik rampalar Kullanıma hazır durumda Genişletilebilir Gri-Siyah Donanımda ekstralar: ABS, döner tabla, havalı fren, EBS, havalı süspansiyon, fiyat talep üzerine (Mobile), süspansiyon: hava, taşıma kapasitesi (kg): 15.600 Fpodpfxjww Dwhe Ag Tob Üst yapı tipi: genişletilebilir, çok iyi durumda, 10,00 m yükleme alanı, HSN/TSN: 6631/000 Hatalar mümkündür.

Durumu: kullanılmış, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2008, Üretim yılı: 2008, Donanım: ABS, * Müller Mitteltal T 30.0 Kompakt Fpjdouz I Rrepfx Ag Teb * Year of manufacture: 2008 * Leaf suspension * Gross weight: 24,000 kg * Ramps * 3 axles Internal number: 24A039

Durumu: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Total Weight: 24,000kg / 30,000kg Unladen Weight: 5,600kg Payload: 18,400 / 24,400kg Overall Length: 10,290mm Loading Length: 5,900mm incl. rear bevel Width: 2,520mm Loading Height: 860mm Additional Information Surcharge for pre-transport / delivery ex yard 26639 Wiesmoor: €1,280.00 net Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear support legs Wheel chocks with holder Full-width mudflap at rear 1 plastic toolbox Preparation for extensions up to 3,000 mm (holes in outer frame with covers, not in the rear inclination) Lashing points, low-bed: 1 pair of lashing slots embedded in front longitudinal beam at kink, 10 t each 7 pairs of lashing points recessed in the upper and side outer frame, 10 t each • 1 x front at kink • 5 x in low-bed • 1 x at rear bevel 12 pairs of lashing holes in outer frame for lashing straps, 5 t each • 5 x at kink, 6 x in low-bed, 1 x at rear bevel Towing Device - Turntable Trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" — reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235 / 75 R 17.5” manufacturer’s choice Steel rims, twin configuration, factory silver Braking System 2-line air brake system Spring-loaded parking brake 2 non-interchangeable couplings at front with connecting lines to the truck, extended by approx. 60 cm Without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical System 12 volts, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at front 2 white/red outline markers at rear 1 x 7-pin 12V plug at front, with connecting cable, extended by approx. 60 cm 1 LED beacon with holder, switched via sidelights (removable lamp) Floor Front kink with steel/chequer plate covering Storage box recessed in the transition to the kink Followed by 70 mm softwood flooring, steel/chequer plate covering in wheel arch area Rear bevel with 70 mm softwood flooring Low-bed area incl. rear bevel: 5,900 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered (tread end with steel/chequer plate) Hydraulic, via tractor PTO with restrictor, controlled from left side in front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operating Instructions For 10,000 kg axle load, a special permit is required — only indivisible loads allowed!!! The specified total weight is technically possible; depending on the type of cargo, the total weight may not be achievable while observing the permissible axle/support/king pin loads. (Poor driving/trailing behavior possible due to improper load distribution) Country of Registration / License Plates Country of Registration: Germany With Dekra inspection/certificate for max. 60 km/h approval, towing vehicle LoF (Country of registration Switzerland: max. 40 km/h possible) Prepared for two-line license plate holder Fjdpfx Ajwm Uy Ejg Tepb Without contour marking/reflection tape according to ECE R 048 Paintwork Frame RAL 6013 reed green "10-year warranty against rust-through" Drawbar galvanized Ramps hot-dip galvanized

Durumu: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer - Steel welded construction - Turntable with robust ball-bearing slewing ring - Foldable rear support Fjdpfx Aoi Ri Agjg Topb - 2 wheel chocks with holders - Full-width rear mudguards - Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel) Lashing Points Low-bed - 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t - 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t - 1x at the front on the gooseneck - 5x in the low-bed area - 1x in the rear bevel - 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks) - 5x gooseneck, 6x low-bed, 1x rear bevel Drawbar Hitch Turntable Trailer - Drawbar with tested 40 mm towing eye Axles & Suspension - Drum brake axles, manufacturer’s choice - Laser-aligned axles/chassis to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) Wheels and Tires - 235 / 75 R 17.5 Fulda - Steel twin wheels, factory silver Brake System - 2-line compressed air brake system - Spring-loaded parking brake - 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle - Connection lines approx. 60 cm extended - Without ABS, but with mechanical ALB, max. 60 km/h permissible Electrics - 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors - 2 white position lights front - 2 white/red lane marker lights rear - 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm - 1 LED beacon with bracket, switched via parking light (removable beacon) - 2 pairs of illuminated, extendable warning boards up to 3,000 mm Floor - Gooseneck front with steel / checker plate covering - Toolbox recessed into drive-over slope at gooseneck - Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area - Rear bevel with 70 mm softwood floor - Low-bed platform including rear bevel: 5,900 mm Loading Ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Wood covered - Supported by spring assist Operating Instructions - For 10,000 kg axle load, a special permit is required; only indivisible loads permitted! - The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution) Country of Registration/Plates - Country of registration: Germany - With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible) - Prepared for two-line license plate holder - No ECE R 048 compliant contour marking / reflective strips Paintwork - Frame: DB 7350 Novagrau - 10-year warranty against rust-through - Drawbar galvanized or black, manufacturer’s choice - Loading ramps hot-dip galvanized Note: Archive images!