Tank römorku

Schmies.eu STS VR-1.5 Saugfass, Vakuumsaugfass

Standard Equipment Basic
Standard models always in stock

Vacuum Suction Tank STS VR-1.5
Bsdsutcq Aspfx Ah Hjlp
Tipper, 1,500L

Tank
• 1,500-litre tank capacity
• Rear tipper with wired remote control
• Hot-dip galvanized tank
• Tank slightly angled to the rear for easier cleaning
• Side rinsing port in the tank to remove contaminants or blockages without opening the tank lid
• Tank lid opens fully to the passenger side and is secured with hook bolts
• Equipped as standard with 2 safety levels to prevent damage to the compressor
• Syphon separator
• Overflow system with 2 balls and sight glass
• Vacuum gauge on suction set with protective guard
• Mechanical fill level gauge with colour scale

Engine and Compressor
• MEC 3000 vacuum compressor with 3,500 l air output
• Maximum vacuum -0.8 bar (continuous operation at -0.5 bar)
• Maximum overpressure 0.49 bar
• Maintenance-free V-belt drive for vacuum compressor
• B&S industrial engine Vanguard 13 hp
• Electric starter, oil sensor, control panel with ignition lock, battery and fuel tank
• Internal suction hose for protection in the engine unit
• Vacuum compressor silencer with oil catch
• Stainless steel heat shield above the exhaust
• 1 litre biologically degradable compressor oil stored in oil bottle holder
• 5L petrol canister in bracket
• Standard funnel with long neck for changing and topping up engine oil
• All engine components and accessories housed in a lockable engine compartment

Chassis
• Self-supporting, fully hot-dip galvanized chassis
• Low-loader tandem chassis, 2.7t
• Track width matches that of passenger cars and Sprinter models for optimal driving characteristics
• Lowest possible centre of gravity for the suction tank
• 2 axles, each with 1,350kg load capacity and independent wheel suspension from a reputable manufacturer
• Continuous welded V-drawbar
• Robust mudguards with metal lamp housings
• Stake mounts for quick securing of suction hoses using elastic straps
• Storage option for tools and accessories between engine enclosure and tank

Suction Tank
• Overrun brake with automatic reverse feature
• Self-locking ball-type coupling
• Reinforced jockey wheel
• 13-pin electrical connector

Connections and Hoses
• 2x suction hoses (3") 5m each with Perrot couplings
• 1x suction lance 3" (1,500mm length)
• 1x Perrot connection (3") on lower tank lid
• 1x Perrot connection (3") on right-hand side in direction of travel

If you are looking for something different to this unit, do not hesitate to contact us directly. Our in-house vehicle manufacturing can fulfil almost any requirement.

For more detailed information and/or photos, please contact us directly. You will find a wide selection of further vehicles for SALE or RENT with us.
Subject to change, prior sale, and errors. The purchaser is responsible for independently verifying the condition and specification of the goods. Sale is conducted exclusively under our Terms and Conditions and with exclusion of any warranty.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.