Gövdeyi kutu gövde ile değiştirin

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

Durumu: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, 7.82 BDF Krone smooth wall swap body, used (multiple units available) The exterior of the swap body, including the roof, will be painted in the customer’s color (standard RAL shade). The subframe and parts of the support legs are not painted; once set down, these areas are not visible from the ground. Set-down height: 1120 mm The swap body is watertight and the roller door operates smoothly. External dimensions (approx. in mm): Length: 7820, Width: 2550, Height: 2925 Internal dimensions (approx. in mm): Length: 7700, Width: 2480, Height: 2700 Door openings (in mm): Width: 2370, Height: 2600 Lashing: keyhole slots Maximum gross weight for registration/operation: 16,000 kg Rail-transport suitable, including railway certification according to DIN EN 13044 Rail approval Code XL (approved for rail transport at over 120 km/h) Floor frame 195 mm high floor assembly including floor; rectangular tube longitudinal members with crossmembers and outer frame welded construction, with lower guide tunnel Rcsdpsvv R Ifjfx Aaaoh 4 container corner castings on 20’ base, symmetrical overhangs 4 grab pocket rails 7 pairs of lashing rings on the side in rubbing rail Floor Type: BO WST 27 mm thick, waterproof bonded phenolic plywood floor, strength according to DIN EN 283; suitable for maximum floor loads up to 5,460 kg forklift axle load 2 front ventilation openings in the floor (according to GGVS) Box body Structure type: AB WST Internal height: 2700 mm Portal opening height (clear): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed construction Smooth side walls made of galvanized steel cassette panels Roof made of trapezoidal-profiled steel sheet, construction height: 25 mm 2 ventilation vents per side wall Rubbing rail and side wall with cutouts; internal 3-sided forklift collision protection, approx. 300 mm high Front wall smooth, made of galvanized steel cassette panels Front wall inside: 21 mm phenolic plywood panel, 750 mm high, above this a continuous 12 mm phenolic plywood panel Front wall outside: top with setback (optimized for cornering) Rear wall with roller door (clear width 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel collision protection for roller guide rail Side walls completely lined inside with keyhole steel sheets 13 recessed steel rails left and right, for double-deck load beams 13 LM load beams for double-deck loading Steel horizontal collision protection at rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to continuous product improvements.

Durumu: incelemesiz (kullanılmış), Fonksiyonellik: denenmemiş, renk: beyaz, 7.82 m BDF Krone Smooth-Sided Swap Body with Portal Doors, used (Multiple units available) Parking height: 1,120 mm The swap body is watertight External dimensions (approx. in mm): Length 7,820, Width 2,550, Height 2,925 Internal dimensions (approx. in mm): Length 7,700, Width 2,480, Height 2,700 Lashing: Keyhole Redswbgrpjpfx Aaajch 4 container corner castings based on 20' standard, symmetric overhangs, 4 grab handle rails Floor Type: BO WST 27 mm waterproof bonded phenolic resin plywood floor, strength according to DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load Box body Internal height: approx. 2,700 mm Overall height: approx. 2,925 mm Corner height: approx. 2,900 mm Sealed box construction Smooth side walls made of galvanized steel cassette panels Roof made of trapezoidal-profiled steel sheet, construction height: 25 mm, 2 ventilation louvres per side wall Impact guard strip and side walls with cut-outs, internal forklift collision protection on 3 sides, approx. 300 mm high Front wall smooth, made of galvanized steel cassettes Front wall inside fitted with 21 mm phenolic resin plywood, 750 mm high, above that a continuous 12 mm phenolic resin plywood panel Front wall outside at the top with offset (optimized for cornering) Side walls internally fully lined with keyhole panels 13 recessed steel guide rails left and right for double-deck loading beam insertion LM loading beams for double-deck loading Horizontal steel collision guards on the rear profile, left and right Please note: Actual dimensions and other specific details may differ slightly from the above due to continuous product improvement.