7.82 BDF Jumbo düz duvarlı takas gövdesi

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

Durumu: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, renk: beyaz, 7.82 m BDF Krone smooth-wall swap body, used (Several units available) Itedovxbfmopfx Aggjr Colour: White Coupling height: 1120 mm The swap body is watertight and the roller shutter door operates smoothly. External dimensions (approx., in mm): Length 7820 x Width 2550 x Height 2925 Internal dimensions (approx., in mm): Length 7700 x Width 2480 x Height 2700 Door openings (in mm): Width 2370 x Height 2530 Lashing system: keyhole slots Maximum permissible gross weight for registration/operation: 16,000 kg, suitable for combined transport (KLV-capable), including railway coding in accordance with DIN EN 13044 Rail approval Code XL (for rail transport above 120 km/h) Chassis: 195 mm high floor assembly incl. floor; rectangular longitudinal beams with cross members and side rails, welded construction with an underslung guide tunnel 4 container corner castings on 20' base, symmetrical projections 4 grab handle strips 7 pairs of lashing rings on the side rubbing rail Floor: Type: BO WST 27 mm waterproof, bonded phenolic resin coated plywood, load capacity according to DIN EN 283; suitable for forklift axle loads up to max. 5,460 kg 2 ventilation openings at the front of the floor (as per GGVS) Box body: Type: AB WST Internal height: 2700 mm Clear portal height: 2525 mm Overall height: 2,925 mm Corner height: 2,900 mm Closed box design Side walls made from smooth, zinc-coated steel cassette panels Roof made from trapezoidal-profiled steel sheeting, 25 mm build height 2 ventilation louvres per side wall Rubbing rail and side wall with recesses, internal forklift collision protection on three sides, approx. 300 mm high Front wall made from smooth, zinc-coated steel cassette panels Front wall inside with 21 mm phenolic resin board, 750 mm high, above that a continuous 12 mm phenolic resin board Front wall outside, upper section offset (optimized for negotiating curves) Rear wall designed as a roller shutter (clear width 2370 mm), with DB inspection Train Plus, replaceable rollers Flat steel collision protection for roller shutter guide rail Side walls entirely fitted with keyhole plates on the inside 13 recessed steel rails each left and right for mounting double-deck loading beams 13 LM loading beams for double-deck transport Horizontal steel bumper on rear profile, left and right Please note: Actual dimensions and other specific details may vary slightly from the above specifications due to continual product improvements.

Durumu: kullanılmış, Üretim yılı: 2000, renk: beyaz, toplam ağırlık: 16.000 kg, azami yük ağırlığı: 13.000 kg, boş ağırlık: 3.000 kg, yükleme alanı genişliği: 2.480 mm, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı yüksekliği: 2.530 mm, makine/araç numarası: 2012773-1, BDF steel swap body / swap box 7.45 m with roller shutter * Swap box / steel box with profiled exterior wall * Suitable for crane and stackable * Keyhole rails * Anti-slip phenolic plywood floor, suitable for forklift traffic * Upper corner fittings * Light rust on frame and structure – technically in good condition! * Interior is dry Isdjl H Ridjpfx Aggstr We always have large quantities in stock from various manufacturers and specifications, for sale or for RENT!!! Nationwide delivery available!

Durumu: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, 7.82 BDF Krone smooth wall swap body, used (multiple units available) The exterior of the swap body, including the roof, will be painted in the customer’s color (standard RAL shade). The subframe and parts of the support legs are not painted; once set down, these areas are not visible from the ground. Set-down height: 1120 mm The swap body is watertight and the roller door operates smoothly. External dimensions (approx. in mm): Length: 7820, Width: 2550, Height: 2925 Itjdpfx Aovv R Ifoggjr Internal dimensions (approx. in mm): Length: 7700, Width: 2480, Height: 2700 Door openings (in mm): Width: 2370, Height: 2600 Lashing: keyhole slots Maximum gross weight for registration/operation: 16,000 kg Rail-transport suitable, including railway certification according to DIN EN 13044 Rail approval Code XL (approved for rail transport at over 120 km/h) Floor frame 195 mm high floor assembly including floor; rectangular tube longitudinal members with crossmembers and outer frame welded construction, with lower guide tunnel 4 container corner castings on 20’ base, symmetrical overhangs 4 grab pocket rails 7 pairs of lashing rings on the side in rubbing rail Floor Type: BO WST 27 mm thick, waterproof bonded phenolic plywood floor, strength according to DIN EN 283; suitable for maximum floor loads up to 5,460 kg forklift axle load 2 front ventilation openings in the floor (according to GGVS) Box body Structure type: AB WST Internal height: 2700 mm Portal opening height (clear): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed construction Smooth side walls made of galvanized steel cassette panels Roof made of trapezoidal-profiled steel sheet, construction height: 25 mm 2 ventilation vents per side wall Rubbing rail and side wall with cutouts; internal 3-sided forklift collision protection, approx. 300 mm high Front wall smooth, made of galvanized steel cassette panels Front wall inside: 21 mm phenolic plywood panel, 750 mm high, above this a continuous 12 mm phenolic plywood panel Front wall outside: top with setback (optimized for cornering) Rear wall with roller door (clear width 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel collision protection for roller guide rail Side walls completely lined inside with keyhole steel sheets 13 recessed steel rails left and right, for double-deck load beams 13 LM load beams for double-deck loading Steel horizontal collision protection at rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to continuous product improvements.