Alçak şasi römork

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.


Excerpt from the equipment. Complete equipment details available upon request.

Weights:
* Permissible gross weight: 24 t
* Technical gross weight: 30 t

Dimensions:
* Approx. 2,100 mm = raised front platform incl. gooseneck, corners chamfered
* Approx. 5,350 mm = low-bed platform - flat loading area
* Approx. 850 mm = rear drive-on slope
* Total width approx. 2,550 mm (approx. 3,000 mm with extensions)
* Loading height when loaded approx. 870 mm
* When coupling with a tractor, please observe the legally permissible overall height and total combination length!

Frame:
* Steel welded construction with front gooseneck and rear chamfer
* Drive-on slope with excavator bucket recess center = depression at rear between the longitudinal beams, approx. 2,300 mm long
* Integrated in the outer frame: 5 pairs of approx. 4 t lashing rings (4x in the low-bed, 1x on the raised platform)
* 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the low-bed, 1x in the drive-on slope, 2x on the raised platform)
* Standard ball race turntable

Frame attachments:
* Both sides of the low-bed platform with extendable extensions with softwood planks approx. 50 mm (Track width of the construction equipment to be transported must not exceed the outer frame width of approx. 2,550 mm)
* 4 pairs of folding 10 t lashing rings, arrangement: 1 pair at the front on the raised platform within the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the gooseneck within the longitudinal beams, 1 pair in the low-bed at the rear before the drive-on slope, in the bucket recess left + right

Drawbar:
* Fixed drawbar with swiveling towing eye approx. 40 + 50 mm, cranked design, silent block bushing, drawbar retaining spring with tensioner
* Truck coupling height from approx. 830 mm to approx. 1,030 mm
* Drawbar length approx. 1,800 mm

Support equipment:
* 2 automatic folding rear supports

Axles:
* 3 SAF air-suspension low-loader axles with drum brakes
* Axle load capacity 11 t/axle
* S-cam brake approx. 300/200 mm
* Automatic slack adjusters

Wheels:
* 12 tyres 235/75 R 17.5, 141J, manufacturer depending on factory choice
* 12 steel rims 6.75 x 17.5, with offset, silver

Brake/floating system:
* Two-line compressed-air braking system according to ECE - Regulation R13
* Wabco brand brake system
* EBS system 4S3M, 1st & 2nd axle with sensors
* RSS/RSP - stability program
* Spring-loaded parking brake on 2nd and 3rd axle
* Steel air reservoir
* Brake/air connection pipes with 2 individual coupling heads, yellow/red
* EBS/ABS connecting cable
* Tension rubber as mount for EBS and electric plugs
* Air suspension with lifting and lowering device (rear axles only), automatic driving height adjustment from 15 km/h (RTR), front axle with axle stop

Floor:
* Softwood floor, approx. 50 mm impregnated, protruding approx. 5-10 mm over upper edge of the frame, steel chequer plate cover over the wheels

Pgodpswx Dcyefx Agyou
Ramps:
* 2 folding single-section lightweight steel drive-on ramps, length approx. 2,800 mm, width approx. 750 mm, with impregnated hardwood deck approx. 35 mm
* Ramps adjustable in width from 350 mm intermediate distance up to max. total width of approx. 3,000 mm
* Ramps lockable in driving position by chains with tensioner
* Ramp lifting aid with spiral spring
* Ramps ca

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.