Üç yöne devirmeli römork

MÜLLER-MITTELTAL 11,9 to., verst. Strongwände, Kombi- Heckklappe

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards Iisdpfx Agexf Sk Negok * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) Isdpfoxf Skpjx Aggoik ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durumu: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: Iiodpfx Agexf Sk Asgjk * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf