Alçak şasi römork

FLIEGL VTS 400 S Luft/ Hydr. 4-Achs Tieflader -902

New Fliegl 4-axle low loader trailer with ramps, model VTS 400

Pgedpfsxrx Nljx Agyju
Gross vehicle weight: 24,000 kg / 40,000 kg
Unladen weight: 8,080 kg
Payload: 15,920 kg / 31,920 kg
Overall length: 11,940 mm
Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm
Width: 2,550 mm
Loading height: 900 mm
Further information
Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net

Chassis – Low Loader Trailer
Steel welded construction
Turntable with heavy-duty ball-race ring
Folding rear supports
2 wheel chocks with holder
Aluminium side underrun protection
Full-width rear mud flap
Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle
Anti-spray flaps in front of and behind 3rd and 4th axles
Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep
2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel
1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable
Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm
Extendable width to 3,000 mm (not in rear bevel area)
(Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm)
Storage compartment for wooden planks beneath the low loader deck
70 mm wooden planks for widening to 3,000 mm
Lashing points for low loader
1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t
4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment)
9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t
- 2 at the front on the gooseneck
- 7 in the low-bed section
First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm
3 pairs of additional folding lashing eyes, each rated at 10 t
- 1 on the gooseneck (protruding)
- 1 at the beginning of the low-bed section recessed in the inner longitudinal beams
- 1 behind the last axle recessed in the floor
Towing gear for turntable trailer
Drawbar with certified 50 mm towing eye
Drawbar height adjustment via spring
Axles & suspension
Drum brake axles, manufacturer’s choice
"Axle/chassis laser alignment" reduces tyre wear and fuel consumption
Air suspension with lift & lower valve + auto-reset function
Wheels and tyres
235 / 75 R 17.5” – manufacturer’s choice
Steel twin wheels, factory silver
Braking system
2-line compressed air braking system
Spring-loaded parking brake
Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale)
Vehicle stability control system
2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle
12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand)
Note: The trailer may only be towed by vehicles which ensure full ABS functionality!
Electrics
12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light
(Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting)
2 white LED position lights at the front
2 white/red LED lane departure lights at the rear
2 x 7-pin non-interchangeab

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.