Çalışma platformlu römork

MÜLLER-MITTELTAL T3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Side underrun protection * Swivel supports at the rear of the chassis frame * Manually adjustable warning sign panels at front and rear * Front axle with closed plastic fenders, rear axle with straight galvanized steel mudguards, each with spray protection * Lateral and rear reflective contour markings * Folding cover (hot-dip galvanized) for toolbox on turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), with integrated lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant folding and retractable lashing rings, loadable in all directions and recessed in the outer frame – rated for 13.4 t in corners, 10 t elsewhere * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear chamfer) * Widening planks stored in the center of the loading area * Excavator arm rest above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted on both sides of the excavator arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulically lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight Ibjdpfx Aex Ipbteggjf * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from week 12/2026 * Sample pictures

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic suspension * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear frame * Mechanically adjustable warning panel sets at the front and rear * Front axle with enclosed plastic mudguards and rear axle with straight galvanized steel mudflaps, each with spray protection * Reflective contour tape along the sides and rear * Hinged (hot-dip galvanized) cover for the toolbox in the turntable platform Ijdjx Ipbgspfx Aggobf * Multi-voltage system * LED tail lights * Removable flashing beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), each with lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear slope) * Widening planks stored in the center of the loading platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp adjustment * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 12 / 2026 * Sample images