Kanca kasalı yük kamyonu (roll-off)

alga AB, 22m³, Container, Türen,sofort verfügbar

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Lsdpfxjgcw Rms Ahzohc Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durumu: kullanılmış, azami yük ağırlığı: 28.240 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, yükleme alanı uzunluğu: 9.500 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.400 mm, yükleme alanı hacmi: 50 m³, Üretim yılı: 2013, Donanım: ABS, Air system, lift axle, MB disc brakes, EBS, aluminum rims, drop-down supports, access ladder, PVC half-shell mudguards, foldable underrun protection, body made of HB 450 steel, 4 mm floor, side walls 3.2 mm thick, split rear wall (1/2 + 1/2), ladder and catwalk, tarpaulin frame, load pressure gauge, 2x tool boxes, sliding tarpaulin with central locking system. Ledpfx Ahjuwhruozohc

Durumu: kullanılmış, kilometre: 351.885 km, güç: 294 kW (399,73 bg), ilk tescil: 12/1996, yakıt türü: dizel, boş ağırlık: 11.800 kg, azami yük ağırlığı: 14.200 kg, toplam ağırlık: 26.000 kg, lastik boyutu: 315 / 80 R 22,5, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.200 mm, frenler: sabit gaz kelebeği, renk: yeşil, şoför kabini: gündüz kabini, vites türü: mekanik, emisyon sınıfı: euro2, süspansiyon: hava, koltuk sayısı: 2, toplam uzunluk: 2.500 mm, toplam genişlik: 3.250 mm, Donanım: ABS, kabin, tır çekici bağlantısı, Vehicle location: Bovenden, license plate on premises, 1x air-suspended seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, sun visor, 16-speed gearbox, ABS (anti-lock braking system), constant throttle, air suspension, trailer coupling with air, electrics, and hydraulics, red environmental badge. Wheelbase: 4,200 mm. Superstructure: Marrel hook lift MA 26.70 for 6.5 m containers. Front axle wheels 385/65 R22.5, 6-cylinder turbo engine!!! Converted to 6x2. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Lhedevhg Ryspfx Ahzec

Durumu: kullanılmış, boş ağırlık: 5.600 kg, azami yük ağırlığı: 25.900 kg, toplam ağırlık: 31.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/1993, yükleme alanı uzunluğu: 6.800 mm, yükleme alanı genişliği: 2.340 mm, yükleme alanı yüksekliği: 1.200 mm, yükleme alanı hacmi: 19 m³, toplam uzunluk: 2.500 mm, toplam genişlik: 3.100 mm, süspansiyon: hava, lastik boyutu: 385 / 65 R 22,5, renk: gri, kilometre: 1.001 km, yakıt türü: dizel, vites türü: diğer, şoför kabini: diğer, Araç konumu: Bovenden, alüminyum üst yapı, 2 aks, BPW akslar, havalı süspansiyon, kayar brandalı, yürüme platformu, kapak, katlanabilir U-korumalık, oluk. Lhedjvhhm Aepfx Ahzjc Üst yapı: Alüminyum kasa yaklaşık 19 m³ AKSESUAR BİLGİLERİ GARANTİSİZ, değişiklikler, ara satış ve hatalar saklıdır!

Durumu: kullanılmış, azami yük ağırlığı: 32.400 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2021, Donanım: ABS, STAS 3 Dingilli Hardox Çelik Damperli Dorse 86 m³ İlk tescil 09/2021 Kazalı dorse, hareket edebilir İç ölçüler (UxGxY): 13.110 x 2.350/2.450 x 2.770 mm (konik yapı) Boş ağırlık 9.640 kg Taban tamamen 5 mm Hardox çelik HB450 Ön ve yan duvarlar 3 mm Hardox çelik HB450 Pnömatik katlanabilir arka tampon (alt koruma) Düz ön duvar, içten erişim merdiveni Arka portal kapılar 50:50 oranında, pnömatik son kilit açma Güçlendirilmiş tavan brandası HYVA tip Alpha, düşük basınçlı kaldırma silindiri 2 adet pnömatik vibratör JOST kranklı tam yük taşıyıcı ayaklar Lhjdpfx Aex E Ixrehzsc SAF dingiller, büyük disk frenli, 430 mm 1. dingil kaldırma aksı WABCO Treyler-EBS ile devrilme önleyici RSS WABCO Smartboard Kaldırma ve indirme tertibatı Otomatik devirmede alçaltma 6 adet 385/55 R 22.5 lastik ALCOA Dura-Bright yüksek parlaklık alüminyum jantlar Alüminyum portatif merdiven Kürek ve fırça tutucu Sol tarafta alet kutusu 4 adet LED geri vites projektörü KİRALAMA yeni SATIN ALMADIR – Bizde tam servis kiralama ile hemen temin edilebilir.

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Lodpfx Ajgcw Rijhzjhc Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Durumu: kullanılmış, Üretim yılı: 2012, çalışma saatleri: 17.383 h, Serial number: 825.0.1916 Magnet system Operating hours: 17,383 MAXCAB - TELESCOPIC, ELEVATING CAB Automatic climate control Lhedpfx Aherqb Dfezsc Rear and side monitoring with camera Outrigger supports front and rear Central lubrication system Dipper stick: 4,850 mm Tyres: 10.00 - Subject to change, prior sale, and errors excepted. The above description is intended for general vehicle identification only and does not constitute a warranty in terms of commercial law. The contractual description as per the purchase agreement is binding. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! The vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Durumu: kullanılmış, azami yük ağırlığı: 25.000 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2019, bir sonraki muayene (TÜV): 07/2025, toplam genişlik: 2.550 mm, toplam yükseklik: 3.800 mm, Donanım: ABS, Schmitz Cargobull Gotha SKI 24 SL 9,6, 1. elden, Alman aracı, 51 m³, çelik, yeni kayar brandalı, TÜV 07/25’e kadar geçerli. Uygun bir MAN 18.510 çekici (yeni model, 2020 model yılı, bakım sözleşmesinden çıkmış, MAN tarafından tamamen revize edilmiş yeni turbo motor, km durumu 490 bin) ek olarak 44.780,00 € net fiyata satın alınabilir. Satış sadece ticaret ve işletmelere yapılır. Lhsdpstqrawefx Ahzsc Yazım ve ilan hatalarından sorumluluk kabul edilmez. Tüm bilgiler taahhüt olmaksızın verilmiştir. Ara satış hakkı saklıdır.

Durumu: kullanılmış, boş ağırlık: 5.220 kg, azami yük ağırlığı: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2018, toplam uzunluk: 7.880 mm, süspansiyon: hava, yük kapasitesi: 33.780 kg, • 1. dingil kaldırılabilir • PNÖmatik fren sistemi (BAE) • Evrensel kapı • 2 kapak • PNÖmatik kilit açma • Alüminyum jantlar • CRAMARO elektrikli brandası • Çeki halkası • Hacim: 27 m3 Lhodex Hkyhspfx Ahzoc • İç ölçüler: 7,88 x 2,42 x 1,42 m

Durumu: kullanılmış, boş ağırlık: 8.600 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2019, yükleme alanı hacmi: 60 m³, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, lastik durumu: 100 yüzde, Donanım: ABS, | Stas FSS Ferrostar 60m³ steel tipper body | ABS / EBS | SAF axles | Disc brakes | Lift axle | Tyres: 385/65 R 22.5 | Front platform | Rear portal doors | Rolling tarpaulin | Lifting and lowering system | Suspension: Lift / Air / Air | Walls and floor made of Hardox 450 | LED work lights | Foldable rear underrun protection | Internal dimensions: | Length: approx. 11,000 mm | Width: approx. 2,430 mm | Height: approx. 2,280 mm | Capacity: 60 m³ | Unladen weight: Lhodpfx Aewwld Aohzsc