Alçak şasi römork

MÜLLER-MITTELTAL 4-achs Anh. Tieflader, Klapprampe, Gummibelag

Durumu: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: Ihjdpfxoylfvme Ah Deu * Vehicle is expected to be available from week 23/2026