Standart-SZM

RENAULT C520-6x4 + HYDR. + INTARDER

Koşul: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward Ncodpfx Alehlz R Seaot - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Koşul: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 27.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 235/75 R17.5, renk: gri, işletme ağırlığı: 11.000 kg, Donanım: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and drop deck without rear bevel - Frame neck + fifth wheel plate 225 mm - Drop deck designed for a point load of 25 t over 5 m - Outer frame closed outward with welded-in lashing rings for securing loads - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tyres: - BPW low-bed trailer axles, each with a 10 t axle load, air bag diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for two coupling heights +100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded flooring, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the drop deck as well as 1 pair each on the gooseneck and at the beginning of the rear unit – 2 pairs of 4 t lashing rings on both gooseneck and rear unit) - 6 pairs of mushroom-type lashing points in the outer frame in the drop deck - Storage compartment with lid in the front left and right of the drop deck floor Front Wall: - 25 mm aluminum hollow profiles raised to the lower edge of the roof with integrated tarpaulin tensioning system Sliding Tarpaulins: - Sliding curtain both sides with welded-in vertical and horizontal straps (approx. 600 mm spacing) and stainless-steel tension locks - Adjustable curtain straps (over-center) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener Njdpfx Aloiu Eu Noaect - Curtain extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm length, positioned in the drop deck at the front cranking - With belt pockets Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door retainer - One aluminum double-joint hinge and two recessed grip recesses per door wing Front Corner Posts: - At roof height, bolted at the front end Central Posts: - 3 pairs of continuously adjustable folding stanchions - Stanchions can be moved along the entire length via trolleys - Central stanchions in the drop deck can also be fixed at the rear platform Roof: - EDSCHA sliding roof (galvanized) with crossbeams that can be shifted in both directions (pushed together to the front in the cargo area) - Rear portal cross member can be swiveled away - PVC tarpaulin roof without customs seal - Hand-operated hydraulic lifting roof on both sides, lift 450 mm - Raised roof movable to the front (9x50) and rear (9x50) positions - Including rear curtain extension and curtain skirt - Roof can be cranked out at the very front on the bulkhead by 900 mm each Accessories: - Extendable warning boards (removable front and rear with socket) incl. position lights up to 4,000 mm loading width - Storage for 4 warning boards on the front wall, top right and left inside - 1 aluminum ladder with bracket, 2,500 mm long, mounted on the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR panel on the rear wall - Central lub

Koşul: ikinci el, kilometre: 251 km, güç: 309 kW (420,12 bg), lastik boyutu: 315/80 R22,5, dingil konfigürasyonu: 8x4, dingil mesafesi: 6.000 mm, renk: kırmızı, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik, toplam uzunluk: 9.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.180 mm, Üretim yılı: 2025, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, klima, merkezi kilitleme, - Klima kontrolü - Radyo - Tavan camı Nsdpfx Ajw S Arlolaect

Koşul: yeni, azami yük ağırlığı: 43.929 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 16.690 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Extendable Low Loader with Wheel Wells (NEW) — Equipment & Highlights — Technology & Bodywork • Extendable low loader with wheel recesses • Overall length: 13,190 mm, platform length: 9,240 mm + 3,500 mm extension • Platform height only 875 mm for low loading height • Overall width: 2,550 mm + 600 mm extension • Unladen weight approx. 14,071 kg • Permissible total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles • 4 BPW axles: 2 fixed front axles, 2 rear trailing axles • Lift axle (automatic & manual) • Air suspension with load gauge • WABCO EBS 4S/3M, ABS & RSS • WABCO Smartboard (axle load, suspension, diagnostics) • 16x tyres 245/70 R17.5 (M+S & 3PMSF) • Tyre pressure monitoring system (compliant with R141) Ramps & Loading Area • Foldable 40-tonne ramps • Ramp length: 2,750 mm, width: 850 mm • Hydraulic sliding system • 45 mm hardwood floor + steel chequer plate over wheel arches • Wheel recesses and covering bridges included • Excavator arm recess at rear Load Securing • Extensive lashing points: • 2×2 lashing rings, 5,000 daN & 1×2 lashing rings, 10,000 daN on the gooseneck • 3×2 lashing rings, 5,000 daN & 4×2 lashing rings, 10,000 daN on the platform • 8,000–10,000 daN on external frame / wheel recess area • 5×2 stake pockets, insertable stakes 50×100 mm • Container locks for 1×20 ft or 1×30 ft Features & Comfort • 1× toolbox (700×400×360 mm) • Stake rack compartment • Warning beacon • LED side lighting, LED working lights Nodpfxsx Ix Rqo Alaect • Wheel chocks • Extension marker boards with LED lighting • Standard 2" kingpin • Metallised chassis (Zn/Al 85/15) — excellent rust protection • Colour: Red — Special Features — • New & immediately available • High payload, extremely versatile • Perfect for transporting machinery, construction equipment, vehicles, etc. • Very robust construction, high-quality BPW components For further information, we are happy to assist you.

Koşul: ikinci el, boş ağırlık: 4.100 kg, azami yük ağırlığı: 13.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2000, bir sonraki muayene (TÜV): 11/2024, süspansiyon: hava, lastik boyutu: 315/80R22.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, twin tires, stanchions. Body: Doll pole trailer for long timber transport, 2x BPW axles, drum brakes, comes with cable remote control. A suitable MAN TGS 26.540 6x4 BL tractor unit with loading crane is available under -87583-. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors. Nedpsufi Eiefx Alaoct