Alçak şasi römork
MAX Trailer 600
Alçak şasi römork
MAX Trailer 600
sabit fiyat KDV hariç
€56.600
(€67.920 brüt)
Durumu
Yeni
Konum
Marz 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€56.600
(€67.920 brüt)
- Satıcının konumu:
- Bundesstr. 9, 7221 Marz, Avusturya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 33.975 kg
- Toplam ağırlık:
- 42.000 kg
- Dingil konfigürasyonu:
- 3 aks
- Toplam genişlik:
- 2.540 mm
- Toplam yükseklik:
- 860 mm
- Donanım:
- ABS
Teklif detayları
- Listeleme kimliği:
- A213-65-417
- Referans no.:
- MAX600-4A
- Son güncelleme tarihi:
- 03.03.2026
Açıklama
MAX Low-bed Trailer NEW | 9.3 m Loading Platform | Ramps | Approx. 34 t Payload | from €56,600
New vehicle – customizable to your specific application.
Robust low-bed trailer with stepped loading platform and high-performance ramp system for professional transport of construction machinery, vehicles, and heavy equipment.
Engineered for high payload, long service life, and reliable use on construction sites.
--- Highlights ---
• Approx. 33,975 kg payload
• Stepped loading platform with rear bevel
• Hydraulic, sliding steel ramps
• Ramp load capacity up to 40,000 kg per pair
• Drawbar version with turntable
• High-strength steel construction
• BPW axles with air suspension
• EBS braking system
--- Technical Data ---
• Gross weight: 42,000 kg
• Unladen weight approx.: 8,025 kg (±3%)
• Payload approx.: 33,975 kg
• Loading platform length: 9,300 mm
• Overall width: 2,540 mm
• Loading height at max. load: approx. 860 mm
• Axle spacing: 1,360 mm
• Max speed: 80 km/h
--- Standard Equipment ---
• Stepped loading platform with approx. 48 mm hardwood floor
• Chequer plate covering over the axles
• Multiple lashing points up to LC 10,000 daN
• Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm)
• Hydraulic ramp lifting unit
• High-strength fine-grained steels S355 / S690
• BPW air-suspended axles, drum brakes
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
--- Included Options / Equipment ---
• Turntable with approx. 1,750 mm long drawbar and 50 mm towing eye
• Coupling height when loaded approx. 630–810 mm
• Electro-hydraulic unit mounted at rear under loading platform
• Tire pressure monitoring system TPMS (ECE R141)
• Cover plates between ramps and loading platform
• Ramp control valves mounted on right side
• Galvanized supports under platform bevel
• Rear beacon mounting brackets
• Extendable warning panels with LED
• Reflective tape according to EU regulations
• Additional license plate holder, rear right
Further equipment and customizations available on request – we configure your vehicle to match your precise requirements.
Bodjypazlspfx Afgjcw
Sample photo. Equipment may vary depending on configuration.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
New vehicle – customizable to your specific application.
Robust low-bed trailer with stepped loading platform and high-performance ramp system for professional transport of construction machinery, vehicles, and heavy equipment.
Engineered for high payload, long service life, and reliable use on construction sites.
--- Highlights ---
• Approx. 33,975 kg payload
• Stepped loading platform with rear bevel
• Hydraulic, sliding steel ramps
• Ramp load capacity up to 40,000 kg per pair
• Drawbar version with turntable
• High-strength steel construction
• BPW axles with air suspension
• EBS braking system
--- Technical Data ---
• Gross weight: 42,000 kg
• Unladen weight approx.: 8,025 kg (±3%)
• Payload approx.: 33,975 kg
• Loading platform length: 9,300 mm
• Overall width: 2,540 mm
• Loading height at max. load: approx. 860 mm
• Axle spacing: 1,360 mm
• Max speed: 80 km/h
--- Standard Equipment ---
• Stepped loading platform with approx. 48 mm hardwood floor
• Chequer plate covering over the axles
• Multiple lashing points up to LC 10,000 daN
• Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm)
• Hydraulic ramp lifting unit
• High-strength fine-grained steels S355 / S690
• BPW air-suspended axles, drum brakes
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
--- Included Options / Equipment ---
• Turntable with approx. 1,750 mm long drawbar and 50 mm towing eye
• Coupling height when loaded approx. 630–810 mm
• Electro-hydraulic unit mounted at rear under loading platform
• Tire pressure monitoring system TPMS (ECE R141)
• Cover plates between ramps and loading platform
• Ramp control valves mounted on right side
• Galvanized supports under platform bevel
• Rear beacon mounting brackets
• Extendable warning panels with LED
• Reflective tape according to EU regulations
• Additional license plate holder, rear right
Further equipment and customizations available on request – we configure your vehicle to match your precise requirements.
Bodjypazlspfx Afgjcw
Sample photo. Equipment may vary depending on configuration.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
İstek gönder
Telefon & Faks
+43 5338 ... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu


















