At taşıma römorku

MENKE-JANZEN Menke 4,50 m 3,5 to Vollalu " Neu" Viehanhänger

WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles

Expertise and Service from a Single Source

WS Trucks GmbH is your reliable partner for the purchase and sale of commercial vehicles. With over 25 years of experience, we offer an extensive range of used and new trucks, livestock transporters, refrigerated vehicles, trailers, and semi-trailers.

Weights & Dimensions
* Permissible total weight: 3,500 kg
* Drawbar load: 100 kg
Body Dimensions (internal):
* Length: approx. 4,500 mm
* Width: approx. 1,950 mm
* Height: approx. 2,000 mm

Chassis & Suspension
* Welded chassis frame made from aluminum profiles
Njdpfoytzv Esx Ak Sola
* Rubber-sprung axle assembly
* Axle load: 2,500 kg per axle
* Axle spacing: 800 mm
* Wheels: 215 R14 C 10.5 J PR, 5-bolt
* 4-wheel overrun brake with reverse automatic
* Lighting system compliant with StVZO

Drawbar & Support
* V-drawbar with overrun device for ball coupling
* Overrun device for max. drawbar load 150 kg
* Automatically folding support wheel, static max. 250 kg
* Spare wheel holder mounted on the front wall
* 2 wheel chocks with holders

Mudguards & Lighting Carrier
* 2 aluminum mudguards (tandem design), folded from 3 mm thick aluminum sheet
* Lighting carrier made of aluminum, mounted laterally on corner posts
* Shock-protected rear light installation
* Number plate with lighting mounted above on the roof frame

Body & Walls
* Body construction from special extruded aluminum profiles
* Sidewalls of aluminum hollow-chamber profiles
* Smooth interior and exterior finish
* Front wall made from aluminum profiles

Floor & Drainage
* Floor made from 30 mm thick aluminum elements
* Surface milled lengthwise and crosswise
* Containment edge at all ramp and door openings
* 1 drainage outlet with cap in the rear floor area

Ventilation & Aeration
* Above the sideboards, ventilation openings approx. 300 mm high on both sides
* With 2 manually operable sliding aluminum vents
* Vents lockable by snap latch
* Lower ventilation openings with flaps

Doors, Roof & Ramp
* Front wall door without ventilation opening
* Clear door width approx. 800 mm
* Clear door height approx. 1,000 mm
* Roof made of solid, flat-laminated plastic panel (honeycomb panel)
* Rear wall as loading ramp, approx. 1,600 mm wide
* Spring-assisted
* Ramp running surface made from aluminum tread plate
* Tread surfaces made from folded steel strips
* 2-piece aluminum ramp railing, approx. 1,200 mm high
* Ramp can be opened as a door
* Ramp running surface with Marotan coating

Interior Equipment & Partition System
* Swiveling aluminum partition grid approx. 1,600 mm high
* Grid made entirely of aluminum
* Each grid with 2 recessed handholds
* Grid can be fixed to the sidewall when open
* Grid can be used in front of the front wall
* Grid can be used at each side post and centrally
* Behind the ramp opening, 2 rows of aluminum barrier gates, divided in the center

Lighting & Electrics
* Interior lighting:
* 1 LED interior light with protective grid
* Switch for interior light mounted in lamp carrier
* Exterior lighting according to ECE Regulation 48
* Deviations from ECE Regulation 48 only upon request and written agreement
* 2 lane marker lights on lamp carrier
* 1 LED work light at the right side above the loading ramp
* 13-pin plug

Accessories & Finish
* 1 plug-in rear underrun guard, stored at front wall
* Body color: RAL 9060 silver
* Floor frame color: RAL 7016 anthracite grey
* Labeling: without lettering

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.