Üç yöne devirmeli römork

FLIEGL TSK 118 Tandem Dreiseitenkipper 5,0m Kipp Anhäng

Durumu: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at rear with 80 mm spherical bearing gear support leg at front foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear spray flaps Quarter shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Sideboard contacts the toolbox when folded down. Lockable storage space for loading ramps underneath the loading area WITHOUT ramps towing equipment for central axle trailer drawbar with certified 40 mm towing eye drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5" manufacturer’s choice steel rims, factory silver Brake System 2-line air brake system colour-coded line routing for easy servicing manual spindle parking brake integral air reservoir ABS and ALB, with ABS connector at the front, with connection cable. Attention: The trailer may only be towed by vehicles which guarantee effective operation of the ABS! 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cables Hydraulics three-way tipping system, hydraulic multi-piston ram with stroke limiter and safety cable low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted on the lorry. hydraulic connection with SVK plug NW 10/3, incl. connecting hose hydraulic operation via truck PTO Tipping Platform Robust tipping platform with 4 mm steel floor, steel sideboard structure, continuous sidewalls, foldable not pendulum-mounted, without central locking below. Removable corner stanchions at the rear. Rear wall foldable and pendulum-mounted, central locking below. Loading platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom. Sideboard retraction springs (not possible with split sidewalls) Platform width 2,420 mm 5 pairs of lashing rings in the floor, each 5 tonnes Operating Instructions The stated gross weight is technically possible; depending on the load carried, the total weight may not be achievable in compliance with the permitted axle, support and kingpin loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany with Dekra inspection and report (according to §13 EC Vehicle Approval Regulation) 24/7 service hotline prepared for one-line number plate holder Contour markings with reflective strips according to ECE R 048, sides white and rear red Paint Finish Frame hot-dip galvanised including passivation "15 years warranty against rust-through" sideboard/platform RAL 5002 ultramarine blue Isdpfx Agjy Dzlcj Nstf Note! Platform internally only primed if painted platform version ordered! Optional: Pair of ramps €1,280.00 / net

Durumu: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Further information plus pre-carriage / provisioning from warehouse location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Front gearbox support leg Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mud flaps Quarter-shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Note! When folded down, the drop side contacts the toolbox. Lockable storage space for loading ramps below the loading platform Central axle trailer towing system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + suspension GFA drum brake axles "Axle/chassis laser aligned" to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker equalization) Wheels and tyres 235 / 75 R 17.5" as per manufacturer’s choice Factory silver steel rims Brake system 2-line compressed air brake system Color-coded line routing for easy service. Manual spindle parking brake ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure effective ABS functionality! 2 non-interchangeable coupling heads at the front, with connecting lines to the truck Electrics 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable Hydraulics Iedpfxey Dzk Ej Ag Notf Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without restrictor. If needed, must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Hydraulic operation via truck PTO Tipper bodies Robust tipping body with 4 mm steel sheet floor, steel side walls, sides continuous, foldable and pendulum-mounted with central locking at the bottom. Rear corner stanchions insertable. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 bottom hinges. Drop side return springs (not available with split sides) Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated to 5 t Operating notes The stated gross weight is technically possible; depending on the load, the total weight may not be achievable within the permitted axle/support/king pin loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration / signs Country of registration: Germany With Dekra inspection and expert report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Paintwork Frame hot-dip galvanized incl. passivation "15 years warranty against perforation corrosion" Side walls / body RAL 9005 deep black Optional loading ramps €1,280.00 net