Düz kasa kamyon

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Koşul: yeni, kilometre: 500 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 3.800 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2024, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, navigasyon sistemi, vinç, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • For detailed vehicle specifications, please refer to the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding device and self-lubricating (Type Jost JSK), mounted on the subframe • Front stabilizer cover with company logo (laser-engraved/Smooth steel sheet) Superstructure: Crane Exchange System: The superstructure including crane can be dismounted, allowing a fifth wheel to be installed on the chassis instead. Operation with crane and superstructure incl. fifth wheel is also possible. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. • Mounting/bolting of the crane and main support carrier onto the subframe. Installation of all hydraulic and electrical connections. Mounting position: front Nodey Hm E Hopfx Aibowf • Flatbed design as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Flatbed painted. Color tone RAL (chassis color) • Removable aluminum drop sides, make Suer, height 600 mm, anodized finish with integrated steps, side stakes Kinngripp removable. • Standard flatbed floor with welded 4 mm steel chequer plate, painted to RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, fitted in perforated rail for flexible arrangement • 4 x chain lashings, 6500 daN (2 front, 2 rear on the body) • Sturdy front wall consisting of welded frame, welded-on 4 mm steel sheet and 5 accessory hooks; front wall height approx. 1300 mm, steel painted, with 2 foldable rings for lashing straps, welded on • Skirting and fenders from aluminum chequer plate (sand-blasted, powder-coated and painted) • Multifix side stake pockets: two rows, spaced some 80 cm from front wall and rear • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizers installed under the chassis • Mounting of rear underrun protection and supplementary stabilizers, including installation of hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semi-trailers as well as at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous slewing, fully mounted, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For detailed crane specifications, please refer to the attached documents • Series 5450 • Initial TÜV-UVV (German safety inspection) acceptance and parameterization of the crane will be carried out in accordance with the technical guidelines and load diagrams of FASSI Cranes Additional Equipment and Crane Accessories: • 5 x crane support pads with holders, arranged per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection logbook Lighting: • 2 x integrated LED work lights in the front wall • 2 x beacon lamps on the FH cab roof • 2 x flashing lights in the engine hood • 2 x LEDs under the superstructure at the rear, left and right, arrangement as agreed • 4 x LED work lights, 2 left and 2 right under the superstructure at the area of the stabilizer legs • 4 x yellow LED light strips, one fitted to each stabilizer leg Further information available upon request.

Koşul: yeni, kilometre: 500 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 3.800 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2024, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, navigasyon sistemi, vinç, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • For detailed vehicle specifications, please refer to the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding device and self-lubricating (Type Jost JSK), mounted on the subframe • Front stabilizer cover with company logo (laser-engraved/Smooth steel sheet) Superstructure: Crane Exchange System: The superstructure including crane can be dismounted, allowing a fifth wheel to be installed on the chassis instead. Operation with crane and superstructure incl. fifth wheel is also possible. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. • Mounting/bolting of the crane and main support carrier onto the subframe. Installation of all hydraulic and electrical connections. Mounting position: front • Flatbed design as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Flatbed painted. Color tone RAL (chassis color) • Removable aluminum drop sides, make Suer, height 600 mm, anodized finish with integrated steps, side stakes Kinngripp removable. • Standard flatbed floor with welded 4 mm steel chequer plate, painted to RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, fitted in perforated rail for flexible arrangement • 4 x chain lashings, 6500 daN (2 front, 2 rear on the body) • Sturdy front wall consisting of welded frame, welded-on 4 mm steel sheet and 5 accessory hooks; front wall height approx. 1300 mm, steel painted, with 2 foldable rings for lashing straps, welded on • Skirting and fenders from aluminum chequer plate (sand-blasted, powder-coated and painted) • Multifix side stake pockets: two rows, spaced some 80 cm from front wall and rear • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizers installed under the chassis • Mounting of rear underrun protection and supplementary stabilizers, including installation of hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semi-trailers as well as at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous slewing, fully mounted, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For detailed crane specifications, please refer to the attached documents • Series 5450 • Initial TÜV-UVV (German safety inspection) acceptance and parameterization of the crane will be carried out in accordance with the technical guidelines and load diagrams of FASSI Cranes Additional Equipment and Crane Accessories: • 5 x crane support pads with holders, arranged per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection logbook Lighting: • 2 x integrated LED work lights in the front wall • 2 x beacon lamps on the FH cab roof • 2 x flashing lights in the engine hood Nwjdsy Hm Eyepfx Aibjf • 2 x LEDs under the superstructure at the rear, left and right, arrangement as agreed • 4 x LED work lights, 2 left and 2 right under the superstructure at the area of the stabilizer legs • 4 x yellow LED light strips, one fitted to each stabilizer leg Further information available upon request.

Koşul: yeni, kilometre: 500 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 3.800 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2024, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, navigasyon sistemi, vinç, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • For detailed vehicle specifications, please refer to the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding device and self-lubricating (Type Jost JSK), mounted on the subframe • Front stabilizer cover with company logo (laser-engraved/Smooth steel sheet) Superstructure: Crane Exchange System: The superstructure including crane can be dismounted, allowing a fifth wheel to be installed on the chassis instead. Operation with crane and superstructure incl. fifth wheel is also possible. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. • Mounting/bolting of the crane and main support carrier onto the subframe. Installation of all hydraulic and electrical connections. Mounting position: front • Flatbed design as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Flatbed painted. Color tone RAL (chassis color) • Removable aluminum drop sides, make Suer, height 600 mm, anodized finish with integrated steps, side stakes Kinngripp removable. • Standard flatbed floor with welded 4 mm steel chequer plate, painted to RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, fitted in perforated rail for flexible arrangement • 4 x chain lashings, 6500 daN (2 front, 2 rear on the body) • Sturdy front wall consisting of welded frame, welded-on 4 mm steel sheet and 5 accessory hooks; front wall height approx. 1300 mm, steel painted, with 2 foldable rings for lashing straps, welded on • Skirting and fenders from aluminum chequer plate (sand-blasted, powder-coated and painted) • Multifix side stake pockets: two rows, spaced some 80 cm from front wall and rear • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizers installed under the chassis • Mounting of rear underrun protection and supplementary stabilizers, including installation of hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semi-trailers as well as at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous slewing, fully mounted, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For detailed crane specifications, please refer to the attached documents • Series 5450 • Initial TÜV-UVV (German safety inspection) acceptance and parameterization of the crane will be carried out in accordance with the technical guidelines and load diagrams of FASSI Cranes Additional Equipment and Crane Accessories: • 5 x crane support pads with holders, arranged per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection logbook Lighting: • 2 x integrated LED work lights in the front wall • 2 x beacon lamps on the FH cab roof • 2 x flashing lights in the engine hood • 2 x LEDs under the superstructure at the rear, left and right, arrangement as agreed • 4 x LED work lights, 2 left and 2 right under the superstructure at the area of the stabilizer legs • 4 x yellow LED light strips, one fitted to each stabilizer leg Nwjdpfsy E A Sasx Aibjf Further information available upon request.