Kullanılmış Humbaur Alçak Yükleyici satın al (576)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Humbaur
küçük ilan
İsviçre
2.356 km
Alçak yükleyici yarı römork
HumbaurCH9
Ara
Durumu: kullanılmış, Humbaur CH9 | Low-bed Semi-Trailer
📍 Standort: Schweiz, Wallisellen
🚛 Lieferung an Ihren Wunschort möglich – Nutzen Sie unseren Versandkostenrechner zur Berechnung der Transportkosten!
💰 Sofortkauf für EUR 2000 oder machen Sie ein Angebot.
Bezahlung bei Lieferung gegen eine geringe Gebühr möglich (vorbehaltlich Genehmigung)*
Ksdpfx Aaoxvi Imo Nodw
👷♂️ Begutachtet von einem unabhängigen Sachverständigen
9 Inspektionspunkte: 7 genehmigt ✅ 2 Mängel ℹ️ 0 kritische Befunde ⚠️
📌 Kommentar des Inspektors:
Kippanhänger, Anhänger ist blockiert und kippt nicht, Reifen in Ordnung, benötigt eine neue Gummi-Anhängerkupplung.
📄 Möchten Sie den vollständigen Inspektionsbericht, zusätzliche Bilder oder ein Video sehen?
Tipp: Die Referenz „39732 Equippo“ ist hilfreich zur Online-Recherche weiterer Details.
💡 Warum dieses Fahrzeug und unser Service überzeugen:
✔ Gründliche Prüfung durch Fachleute
✔ Lieferung direkt zur Baustelle
✔ Geld-zurück-Garantie
✔ Sichere und flexible Zahlungsmethoden
🔄 Sie prüfen auch andere Maschinen?
Auf unserer Plattform finden Sie praktische Tools und Services für alle Maschinenbetreiber und -besitzer – einfach und übersichtlich.
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici römork
HumbaurHTD30K-RM-BM / Luftfederung
Ara
Durumu: yeni, boş ağırlık: 6.700 kg, toplam ağırlık: 30.000 kg, yükleme alanı uzunluğu: 8.550 mm, yükleme alanı genişliği: 2.540 mm, Üretim yılı: 2024, Donanım: tır çekici bağlantısı, HTD30K- RM-BM / Air Suspension
Technical Data:
Internal dimensions: approx. 8,550 mm x 2,540 mm
Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm
Permissible total weight: 24,000 kg
Payload: approx. 17,300 kg
Tires: 235/75 R17.5 twin tires
Loading height: approx. 900 mm
Drawbar length: approx. 1,800 mm
Coupling height: approx. 800–980 mm
Plank length: approx. 3,150 mm
Plank width: approx. 750 mm
Permissible total weight (special permit): 30,000 kg
Payload (special permit): approx. 23,300 kg
Low bed length: approx. 6,500 mm
Overall length (B-dimension): 10,800 mm
Technical gross weight: approx. 33,000 kg
8 pairs of lashing rings, 3,000 kg per lashing point, located in the outer frame
3 pairs of lashing rings, 10,000 kg per lashing point, recessed in the low bed
2 pairs of lashing rings, 10,000 kg per lashing point, recessed in the rear bed
4 pairs of lashing rings, 2,000 kg per lashing point, above the wheel cutouts 2nd and 3rd axle
7 pairs of lashing rings, 3,000 kg per lashing point, stake pockets (90x50 mm) with lashing option
Standard Equipment:
Axles
Low loader axles from renowned manufacturers
Kjdpfjq Ulaqsx Aa Nodw
Suspension
Air suspension unit including lifting and lowering function, acting on the rear axle aggregate
Braking System
Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake
Including 2 external test connections
for brake/modulator and bellows pressure
Electrics
LED lighting with indicator function
for side marker lights, multivoltage (12–24V)
Turntable
Heavy-duty welded construction with low-maintenance ball bearing turntable
Drawing Device
Drawbar with 8° angled towing eye Ø40 mm, height adjustable, low-maintenance silent bushings
Frame
Robust welded structure made from high-strength fine-grain steel
Continuous cross-members for maximum stability
Front wheel recess (top length approx. 2,170 mm); rear wheel recess (top length 1,280 mm), depth 330 mm
Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm)
Maximum safety during loading and unloading
Flooring
50 mm softwood planking
Ramps
One-piece hot-dip galvanized loading ramps
(3,100 mm x 750 mm) with 50 mm softwood planking, laterally shiftable
Direct-acting upright spring assist for easy operation
Optimum securing by tension lock and counter-stop
Finishing
Chassis and turntable frame hot-dip galvanized by immersion
Support
2 folding supports at the rear left and right of the vehicle
Features
Foldable side underrun protection
Other
Retro-reflective markings according to ECE Directive R48: white on the side, red at the rear
Front wheel recess cover with 2 pairs of stake pockets, without planking (cover retractable under the longitudinal beams)
Hardwood flooring for RM covers front and rear wheel recess covers
Storage box at the top front of the platform area, with folding lid, size approx. L 700 x D 810 x H 140 mm
LED warning package, HTD offset Aspöck warning panels (4), electrics and beacon
3 m accessory kit without loading ramp bevel for HTD30K wheel recess low loaders with 6,500 mm low bed, folding extension with spruce planks for the flat area of the low bed
Basic hydraulics for trucks with rear connection, operating pressure max. 200 bar, up to 150 l/min with 2-circuit hydraulic connection and return with quick coupling SVK BG3
Hydraulic ramp shift side-to-side by approx. 300 mm each side
Hydraulic ramp lifter for single-piece ramp
Hydraulic support legs left and right, suitable for stepped l
küçük ilan
Karlstein am Main
2.399 km
Alçak yükleyici römork
HumbaurHTD 30 85 25 K Tieflader hydr. Rampen
Ara
Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WHD308525N1103145, boş ağırlık: 6.460 kg, azami yük ağırlığı: 23.540 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2023, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 6.490 mm, yükleme alanı genişliği: 2.540 mm, toplam uzunluk: 8.540 mm, toplam genişlik: 2.540 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17.5, lastik durumu: 80 yüzde, renk: gri, römork freni: frenli römork, Donanım: ABS, merkez döner tabla, araç numaramız: #30613
Humbaur HTD 30 85 25 K alçak şasi treyler
hidrolik yükleme rampaları 3.100 x 750 mm
Toplam uzunluk: 8.540 mm
Alçak yatak uzunluğu yaklaşık 6.490 mm
Genişlik: 2.540 mm
Akslar: SMB
Kampanalı frenler
Çift tekerlekli lastikler 235/75 R 17.5 yaklaşık %80 diş derinliği
Düşük şasili kısımda 4 çift kazık yuvası 90 x 50 mm
Yüksek şasili kısımda 2 çift kazık yuvası 90 x 50 mm
Düşük şasili kısımda 3 çift 10.000 kg'lık yük sabitleme halkası, gömme
Yüksek şasili kısımda 2 çift 10.000 kg'lık yük sabitleme halkası, gömme
Çeşitli 3.000 kg'lık yük sabitleme noktaları
Kdodpoxu Dnfjfx Aa Nsw
Yükleme yüksekliği yaklaşık 900 mm
Yükleme açısı yaklaşık 10°
Yüksekliği ayarlanabilir çekme kolu
40 mm çekme halkası
LED aydınlatma
Şasi sıcak daldırma galvanizli
Yan alttan koruma
2 çift uyarı tabelası
1x döner ikaz lambası
Arka destek
ABS
EBS
Yüksek yatakta kapaklı saklama bölmesi
Talep üzerine finansman/kiralama mümkündür!
küçük ilan
Kaltenkirchen
2.524 km
Alçak yükleyici
HumbaurHumbaur 3-Achs Auflieger Radmulden/Lifta./Verzinkt HTS30K- Radmulden
Ara
Durumu: yeni, azami yük ağırlığı: 37.460 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.180 mm, yükleme alanı genişliği: 3.000 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, Donanım: ABS, HUMBAUR 3-axle wheel recess low loader trailer with cranked loading platform, type HTS30K- Radmulden
---
INCLUDES lift axle & trailing steering axle with SAF air suspension
INCLUDES aluminium side walls and toolbox on the raised platform
INCLUDES 3-metre extension package
INCLUDES excavator trough
INCLUDES large hydraulic package (hydraulic ramp lifter, hydraulic lateral shift & hydraulic rear support)
Specification: V41
* Permissible gross weight: 48,000 kg
* Payload: approx. 37,460 kg
* Chassis frame and ramps hot-dip galvanized by immersion
* Visible surfaces painted in RAL colours
* SAF air suspension unit with lifting and lowering function
* Lift axle with traction help and trailing steering axle
* EBS electronic braking system
* WABCO Smart Board for axle load display
* Excavator arm trough approx. 3,000 mm long
* Loading height: approx. 890 mm
* Fifth wheel height: approx. 1,230 mm
* Tyres: 235/75R17.5 – 12 units
* Lowbed length: approx. 8,680 mm including slope
* Saddle platform length: approx. 3,500 mm including slope
* 2" king pin, adjustable by 340 mm for 2+3 axle tractor units
* Wheel recess depth front 390 mm, rear 320 mm for various wheelbases
* Wheel recess insert sections with hardwood covers
* Gooseneck with 400 mm front wall
* 400 mm high aluminium side wall, foldable on the side + storage box with lid
* 3 pairs of recessed lashing rings (6 t) in high deck
* 3 pairs of lashing points (3 t) in high deck outer frame
* 5 pairs of recessed lashing rings (10 t) in low bed
* 5 pairs of bolted lashing eyes (6 t) on outer frame
* 3 pairs of stake pockets in high deck outer frame
* 5 pairs of stake pockets in low bed outer frame
Kdedpskn N Rpsfx Aa Nsw
* 3 pairs of lashing eyes (6 t) in excavator trough
* 3-metre widening package with folding outriggers, timber planks
* Steel toolbox under loading platform, lockable, includes storage compartment for wooden planks, mounted on the side under the platform
* Warning package with lighting
* Rotating beacon at rear
* 2x LED reversing lights at rear
* 1-part ramps approx. 3,150 x 750 mm – approach angle approx. 10°
* Softwood flooring on low loader & saddle platform
* Hydraulic ramp lifters
* Hydraulic lateral shift
* Hydraulic rear support
* COC documents
* 40,000 kg permissible gross weight only with special permit according to §70
* 1 pair load securing rails, galvanized
* Gallows suspension for supply lines
* Climbing slats on drive-up slope
* Brake connection: red/yellow
* Electrics: triple socket with 2x7-pin sockets (1 x ISO 1185 / 1x ISO 3731, 24V-N/24V-S) and 15-pin socket ISO 12098
* ECE plate at rear
∗Stock vehicle – available immediately
∗Subject to prior sale
∗Ex works price
küçük ilan
Lääne-Harju vald
2.388 km
Alçak yükleyici
HumbaurHTS30 SCHRAG SAF AXLES / REAR AXLE STEERING
Ara
Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2022, toplam uzunluk: 13.950 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, Üretim yılı: 2022, Donanım: ABS, = Ekstra seçenekler ve donanımlar =
- EBS
= Açıklamalar =
Kdodpfsxrmcyox Aa Now
Ek bilgiler:
Marka: HUMBAUR
Model: HTS30 SCHRAG
Yapı: Alçak şasi (platform Uz.=9010 mm / G.=2550 mm / Y.=899 mm)
Yıl: 07.2022
Süspansiyon: Havalı
Frenler: Kampana
Boyutlar: U/G: 13950 mm / 2550 mm
Ağırlıklar: azami/boş: 48000 kg / 10500 kg
SAF Dingiller / Arka dingil yönlendirmeli
Model yılı: 2022
= Daha fazla bilgi =
Lastik ebadı: 235/75R17.5
Süspansiyon: Havalı süspansiyon
Ön aks: Kaldırılabilir aks
Arka aks: Yönlendirilebilir
Boş ağırlık: 10.500 kg
Taşıma kapasitesi: 37.500 kg
Azami yüklü ağırlık: 48.000 kg
Daha fazla bilgi için lütfen Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche veya Deniss Urmaker ile iletişime geçin.
Daha fazla ikinci el araç keşfedin
küçük ilan
Ergoldsbach
2.128 km
Alçak yükleyici römork
HumbaurHS 105020 BS SMB mit Gitterrostbelag
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, HS 105020 BS 10145 / SMB with grating surface on ramps
++ Delivery possible, freight charges on request ++
Technical Data:
Loading height: 705 mm
Approach angle: 16°
Tyres: 235/75R17.5
Equipment:
ABS
CHASSIS FRAME INCLUDING SIDE WALLS AND DRAWBAR FULLY HOT-DIP GALVANIZED
HEAVY-DUTY SMB AXLES WITH ROBUST PARABOLIC SUSPENSION
AXLE UNIT WITH LOAD EQUALIZATION
4 RECESSED, FORGED LASHING POINTS IN THE CORNERS
12 LASHING LOOPS INTEGRATED INTO THE OUTER FRAME
CONTINUOUSLY ADJUSTABLE HEIGHT COUPLING SYSTEM
RAMP SURFACES WITH STURDY, HOT-DIP GALVANIZED STEEL GRATINGS FOR MAXIMUM GRIP
TAIL LIGHTS PROTECTED AND INTEGRATED INTO UNDER-RUN PROTECTION
EXTRA HIGH CORNER POSTS FOR SECURE RAMP POSITIONING
ROBUST, HOT-DIP GALVANIZED STEEL MUDGUARDS
2 FOLDABLE AND TELESCOPIC SUPPORT LEGS AT THE REAR
ALUMINIUM SIDE UNDERRUN PROTECTION FROM START OF LOAD PLATFORM TO FIRST AXLE
HEAVY-DUTY SUPPORT WINCH WITH LOAD AND QUICK ACTION MODE
LOW LOADING HEIGHT
235/75 R17.5-inch TYRES
and much more…
Optional loose accessories available.
Kdjdowkt Hlepfx Aa New
- - All information subject to change - - Images may differ - -
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHBTZ 137225 BS schräg
Ara
Durumu: yeni, boş ağırlık: 3.900 kg, azami yük ağırlığı: 9.700 kg, toplam ağırlık: 13.600 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.280 mm, yükleme alanı genişliği: 2.450 mm, süspansiyon: hava, lastik boyutu: 205/65 r17,5, dingil mesafesi: 1.270 mm, Üretim yılı: 2023, Donanım: ABS, tır çekici bağlantısı, HBTZ 197224 BS tandem bevelled
400 mm aluminium side walls
Loading platform bevelled at the rear
Loading height 870 mm
Axles from renowned manufacturer, air-suspended
ABS
Height-adjustable drawbar
One-piece spring ramps
Kedpfjgi H Dpox Aa Nsdw
3 pairs of 10 t lashing points
8 pairs of 2 t lashing points
Fully galvanised
Tyres 205/65 R 17.5
küçük ilan
Kaltenkirchen
2.524 km
Alçak yükleyici römork
HumbaurHBT106224 BE -Multi
Ara
Durumu: yeni, azami yük ağırlığı: 9.000 kg, toplam ağırlık: 11.900 kg, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2024, Donanım: ABS, hidrolik arka platform, tır çekici bağlantısı, HUMBAUR 11.9 t Tandem Low-loader drive-over trailer with ramp shaft, Model HBT 106224 BE – MULTI (sliding planks)
INCLUDES anodised aluminium side walls, 600 mm high
INCLUDES galvanised H-frame, 1,000 mm high / front wall total height 1,600 mm
INCLUDES HOT-DIP GALVANISED CHASSIS/DRAWBAR
Kdodpfstiwv Uox Aa Now
Specification:
• Gross vehicle weight: 11,900 kg
• Payload: approx. 9,000 kg
• Loading area: approx. 6,200 x 2,460 mm
• Unladen loading height: approx. 920 mm
• Overall dimensions (LxWxH): approx. 8,140 x 2,550 x 2,520 mm
• Anodised aluminium side walls, foldable and removable on the sides; galvanised corner stanchions, plug-in at front and rear, 600 mm high
• H-frame 1,000 mm high (total front wall height 1,600 mm)
• Lockable compartment in chassis frame for optional aluminium ramps
• Continuously height-adjustable drawbar for coupling heights (unladen) approx. 700 – 1,000 mm
• Reinforced 12 t gearbox support winch with load and quick mode
• BPW axles
• 6 flush-mounted lashing rings (6 t each)
• 14 retractable external frame lashing brackets (2 t each)
• 2 telescopic drop legs at the rear
• Twin-circuit air brake system with ALB function
• ABS braking system 24 Volt
• Hand spindle parking brake
• Hot-dip galvanised steel mudguards
• Softwood plank loading floor
• Chassis frame and drawbar hot-dip galvanised by immersion
• Tyres: 235/75 R17.5
• Maintenance-free parabolic suspension with load compensation
• Electrics: 15-pin, 24 Volt
• Brake connection: 2 colour-coded, misconnection-proof coupling heads red/yellow ISO 1728
Your advantages:
• High-quality, corrosion-resistant anodised aluminium side wall system
• Optimum corrosion protection due to hot-dip galvanising by immersion
• Safe loading/unloading with telescoping rear drop legs
• Easy and convenient handling with the patented locking system of the ALU loading ramps
• Lockable ramp compartment
• Excellent cargo securing due to standard lashing options
• The infinitely height-adjustable drawbar provides compatibility with varying coupling heights of the towing vehicles
• Low own weight allows for high payload
Options available at extra cost:
• 1 pair of ALU loading ramps (8 t/pair) with patented locking system, approx. 3,570 mm long x 400 mm wide (approx. 55 kg per ramp)
• 2 pairs of container locks for 20 ft. ISO container
*Stock vehicle – immediately available
*Interim sale reserved
*Ex works price – Gersthofen
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHBTZ 247224 Tridem 3-Achser
Ara
Durumu: yeni, boş ağırlık: 5.680 kg, azami yük ağırlığı: 18.320 kg, toplam ağırlık: 24.000 kg, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: hava, lastik boyutu: 205/65 r17,5, Üretim yılı: 2023, Donanım: ABS, Three-axle trailer
BPW low-bed axles
Electronic air suspension with 2 ride heights
Lowering function for safe loading
Brake system according to EC regulations with 2S/2M
Drawbar with towing eye, Ø 50 mm
Raising and lowering of the drawbar
8 pairs of 10-ton recessed lashing rings in the low bed
6 pairs of 2-ton lashing points above the wheel cut-outs
Kdsdpfjh I H Ddox Aa New
5 pairs of 3-ton lashing/pocket sleeves for stakes 90x50 mm
50 mm softwood floor
Chassis frame hot-dip galvanized by immersion
Folding side underrun protection
Stake pocket package in the outer frame
One-piece hot-dip galvanized loading ramps
Sideways adjustable
Direct acting upright spring supports
küçük ilan
Kaltenkirchen
2.524 km
Alçak yükleyici
HumbaurHumbaur 3-Achs Auflieger LIA&NLA/verzinkt/3mPaket/Hydr.
Ara
Durumu: yeni, azami yük ağırlığı: 38.000 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.180 mm, yükleme alanı genişliği: 3.000 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, Donanım: ABS, HUMBAUR 3-Axle Lowbed Semi-Trailer with Drop Deck, Model HTS30K-V44+
Kdedpfx Askn N S Uea Nsw
---
INCLUDES lift axle
INCLUDES self-steering trailing axle with SAF air suspension
INCLUDES 3-meter extension package
INCLUDES storage box under the loading area
INCLUDES TIM/WABCO smart board for axle load monitoring
INCLUDES hot-dip galvanized chassis
INCLUDES aluminum side boards and storage box on the gooseneck platform
INCLUDES stake pockets and lashing package
INCLUDES excavator trough
Specification: V44+
* Permissible gross weight: 48,000 kg
* Payload: approx. 38,000 kg
* Chassis frame and ramps hot-dip galvanized in immersion bath
* SAF air suspension system including lifting and lowering functions
* INCLUDES galvanized chassis
* Lift axle with start-up aid and trailing self-steering axle
* EBS – Electronic Braking System
* WABCO smart board for axle load monitoring
* LED lighting system
* Loading height: approx. 890 mm
* Coupling height: approx. 1,230 mm
* Tires: 235/75R17.5 – 12 total
* Lowbed length: approx. 8,680 mm incl. bevel
* Gooseneck platform length: approx. 3,500 mm incl. bevel
* Excavator trough
* 2" kingpin adjustable by 340 mm for 2+3 axle tractors
* Gooseneck with 400 mm front wall
* 400 mm aluminum side panels, foldable + storage box with lid
* Ramp rail at the deck step to the gooseneck
* 3 pairs of recessed lashing rings, 6 t in the highbed
* 3 pairs of lashing points, 3 t on the outer frame of the highbed
* 5 pairs of recessed lashing rings, 10 t in the lowbed
* 3 pairs of lashing eyes, 6 t bolted to the outer frame
* 3 pairs of stake pockets on outer highbed frame
* 5 pairs of stake pockets on outer lowbed frame
* 3-meter widening kit with folding outriggers, timber planks
* Steel toolbox under the loading platform, lockable, designed for side storage of timber planks mounted under the loading bed
* Warning package with lighting
* Rotating beacon at rear
* One-piece ramps, approx. 3150 x 750 mm – approach angle approx. 10°
* Softwood covering on ramps, lowbed & gooseneck platform
* Ramp lifting spring mechanism
* COC (Certificate of Conformity) documents
* 48,000 kg gross only with special permit as per §70
* Climbing strips on the ramp slope
* Brake connections: red/yellow
* Electrics: triple socket with 2x 7-pin sockets (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098
---
Sample images – equipment may vary!
*Stock vehicle – immediately available
*Subject to prior sale
*Ex-works pricing
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHS 504020 BS BAUMASCHINENTRANSPORTER
Ara
Durumu: yeni, boş ağırlık: 1.500 kg, azami yük ağırlığı: 3.500 kg, toplam ağırlık: 5.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 330 mm, süspansiyon: diğer, lastik boyutu: 215, dingil mesafesi: 850 mm, Üretim yılı: 2023, Donanım: ABS, HUMBAUR Construction Machinery Tandem Low Loader HS 654020 BS
INCLUDES ALUMINIUM loading ramps at the rear
HOT-DIP GALVANIZED CHASSIS FRAME
Equipment:
• Permissible total weight: 6,500 kg
• Payload approx. 4,900 kg
• Platform dimensions approx. 4,000 x 2,000 mm
• ALUMINIUM loading ramps
• Height-adjustable drawbar
• Automatic jockey wheel
• 4 pcs 3 t lashing rings (in the corners)
• 10 pcs 2 t flush-mounted lashing points in the outer frame
• Dual-circuit air brake system with ABS
• Steel mudguards
• Platform floor made of softwood planks
• Chassis frame fully hot-dip galvanized by immersion bath
• Tyres: 215/75 R17.5
Your advantages:
• Low platform and overall height
• Optimal corrosion protection thanks to full hot-dip galvanization
Kdsdpfxehmm Rvj Aa Nsw
• Safe loading and unloading with ramp supports
• Easy and lightweight handling of aluminium ramps
• Ideal load securing options thanks to standard lashing devices
• Infinitely height-adjustable drawbar allows compatibility with different towing vehicle hitch heights
• Low unladen weight = higher payload
küçük ilan
Kaltenkirchen
2.524 km
Alçak yükleyici
HumbaurHumbaur 21 to Tandem Tieflader 7,2 m Luftfed.&Liftachse HBTZ 217224 BS
Ara
Durumu: yeni, azami yük ağırlığı: 16.200 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.250 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5, Donanım: ABS, tır çekici bağlantısı, HUMBAUR 21 t Tandem Low-Loader, Drive-Over Model with Rear Taper and Folding Steel Ramps, Type HBTZ 217224 BS
---
INCLUDES SAF air suspension with lift/lower function
INCLUDES central axle lift on 1st axle
INCLUDES galvanized 400 mm high solid steel front wall
INCLUDES protected recessed taillights in the rear bumper
INCLUDES reinforced, stepless height-adjustable drawbar via spindle
HOT-DIP GALVANIZED CHASSIS/DRAWBAR
Specifications:
* Permissible gross weight: 21,000 kg
* Payload: approx. 16,200 kg
* Loading area: approx. 7,250 x 2,540 mm
* Unladen loading height (wheel recesses): approx. 870 mm
* Total dimensions (LxWxH): approx. 9,400 x 2,550 x 3,710 mm
* Galvanized 400 mm high solid steel front wall
* Loading platform tapered at the rear
* Loading ramps with wooden decking, laterally adjustable (approx. 3,100 x 760 mm) with spring lift for each ramp
* Approx. 13° ramp angle
* Reinforced, stepless drawbar height adjustment for coupling heights (unladen: approx. 750 - 1,000 mm)
* DIN towing eye Ø 50 mm bolt-on
* Reinforced 12 t gearbox support winch with load and rapid mode
* Welded climbing strips on rear ramp incline
Kdodpjkn N Rwofx Aa Now
* 8 recessed 10 t lashing rings
* 16 folding 2 t lashing brackets in the outer frame, can be lowered
* 2 telescopic folding supports at the rear of the trailer
* 2-circuit air brake system with ALB (automatic load sensing)
* EBS brake system, 24 V, with ISO 7638 EBS connector; Note: Towing vehicle must have ABS/EBS connection.
* Spring-loaded parking brake
* Galvanized steel mudguards
* Deck and ramps with softwood planks
* Chassis frame and drawbar hot-dip galvanized in immersion bath
* Tyres: 235/75 R17.5 (8 plies)
* Electrical system: 15-pin, 24 V
* Brake connection: 2 idiot-proof coupling heads, red/yellow (ISO 1728)
Your benefits:
* Optimum corrosion protection due to hot-dip galvanization in an immersion bath
* Safe loading/unloading via telescopic rear supports and welded climbing strips on rear ramp
* Easy and light steel ramp handling with ramp lifters
* Ideal load securing thanks to numerous standard lashing points
* Reinforced, stepless height-adjustable drawbar ensures compatibility with various towing vehicle coupling heights
* Low tare weight = high payload
---
Optional:
* Hydraulic ramp lift system
*Stock unit - available immediately
*Subject to prior sale
*Ex works price
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurVermietung LKW ANHÄNGER 10,5 to mit Auffahrschienen DOLLCO 135 €
Ara
Durumu: yeni, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 400 mm, süspansiyon: çelik, renk: gümüş, Donanım: ABS, hidrolik arka platform, tır çekici bağlantısı, 1 day €135
3 days €370
1 week €660
1 month €1,950
Load dimensions: 500 cm x 201 cm x 30 cm with loading ramps 11.5
Construction Machinery Tandem Low Loader HS 115020BS
HOT-DIP GALVANIZED
Equipment:
• Permissible total weight: kg
• Payload approx.: kg
• Loading area approx.: 5000 x 2010 mm
• Loading ramps with grating surface, hot-dip galvanized
• Fixed drawbar
Kodpoin Ia Rsfx Aa Nodw
• Reinforced 25 t gearbox support winch with load and rapid operation (no jockey wheel!)
• 2 pairs of recessed 6 t lashing rings (in the corners)
• 5 pairs of recessed lashing brackets in the outer frame (2,000 daN per pair)
• 2 folding supports at the rear of the vehicle
• ABS braking system
• Steel mudguards, hot-dip galvanized
• Wooden decking on the bed
• Chassis frame including bodywork hot-dip galvanized in immersion bath
küçük ilan
Kaltenkirchen
2.524 km
Alçak yükleyici
HumbaurHumbaur 21 to Tandem Tieflader 7,2 m Luftfed.&Liftachse HBTZ 217224 BS
Ara
Durumu: yeni, boş ağırlık: 4.600 kg, azami yük ağırlığı: 166.400 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.500 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 3.710 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5, Donanım: ABS, tır çekici bağlantısı, HUMBAUR 21 t Tandem Low-Loader, Drive-Over Version with Rear Incline and Folding Steel Ramps, Model HBTZ 216524 BS
---
---
INCLUDES SAF Air Suspension with Lift/Lower Function
INCLUDES Central Axle Lift on 1st Axle
INCLUDES Galvanised 400 mm High Solid Steel Front Wall
INCLUDES Protected Recessed Rear Lights in End Crossmember
INCLUDES Reinforced Stepless Drawbar Height Adjustment via Spindle
---
---
HOT-DIP GALVANISED CHASSIS/DRAWBAR
Specifications:
* Permissible Gross Weight: 21,000 kg
* Payload: approx. 16,400 kg
* Load Area: approx. 6,500 x 2,540 mm
* Unladen Deck Height: approx. 870 mm (wheel recesses)
* Overall Dimensions (LxWxH): approx. 8,700 x 2,550 x 3,710 mm
* Galvanised 400 mm High Solid Steel Front Wall
* Rear-Tapered Loading Platform
* Road Ramps with Wood Covering, Sideways Adjustable (approx. 3,100 x 760 mm)
* Standard Ramp Spring Lifter (Hydraulic Ramp Lifter at extra cost)
* Approx. 13° Ramp Approach Angle
* Reinforced Stepless Drawbar Height Adjustment for coupling heights unladen approx. 750 - 1,000 mm
* DIN Drawbar Eye Ø 50 mm
* Reinforced 12 t Gear Support Winch with Load and Fast Gears
* Welded Climbing Strips on Rear Slope
* 8 Recessed Lashing Rings, 10 t Each
* 16 Folding Lashing Brackets, 2 t Each, in the Outer Frame (retractable)
* 2 Telescopic Folding Support Legs at Vehicle Rear
* Dual-Circuit Air Brake System with ALB Function
* EBS Brake System 24 Volt with EBS Connector ISO 7638 (Note: Towing vehicle must be equipped with ABS/EBS connection)
* Spring-Loaded Parking Brake
* Galvanised Steel Mudguards
* Floor and Ramps with Softwood Planking
* Chassis Frame and Drawbar Hot-Dip Galvanised by Immersion
* Tyres: 235/75 R17.5 (8 units)
* Electrics: 15-pin, 24 Volt
* Brake Connection: 2 Interchange-Proof Coupling Heads, Red/Yellow ISO 1728
Your Advantages:
Kdodpskcuyzjfx Aa Nsw
* Optimum corrosion protection due to hot-dip galvanising by full immersion
* Safe loading and unloading thanks to telescopic folding supports at the rear and climbing strips on the rear ramp
* Simple and easy handling of the steel ramps with ramp lifters
* Ideal load securing options through standard lashing points
* The reinforced infinitely adjustable drawbar height allows compatibility with different coupling heights of towing vehicles
* Low unladen weight, resulting in high payload capacity
---
Optional:
* Hydraulic Ramp Lifting System
*Stock vehicle – available immediately*
*Subject to prior sale*
*Ex-works price*
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHS 654020 BS Baumaschinentransporter
Ara
Durumu: yeni, boş ağırlık: 1.600 kg, azami yük ağırlığı: 4.900 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2023, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 330 mm, süspansiyon: diğer, lastik boyutu: 215/75 r17,5 zoll, dingil mesafesi: 850 mm, Üretim yılı: 2023, Donanım: ABS, HUMBAUR Construction Equipment Tandem Low-Loader HS 654020 BS
INCLUDES ALUMINIUM Loading Ramps at the Rear
HOT-DIP GALVANIZED CHASSIS FRAME
Features:
• Permissible total weight: 6,500 kg
• Payload approx. 4,900 kg
• Loading area approx. 4,000 x 2,000 mm
Kdsdpshmm Ryjfx Aa Njw
• Loading ramps made of aluminium
• Fixed drawbar
• Automatic jockey wheel
• 4 lashing rings (corner, 3 t each)
• 10 recessed lashing points (2 t each, in outer frame)
• Dual-circuit air ABS braking system
• Steel mudguards
• Platform floor made of softwood planks
• Chassis frame hot-dip galvanized by immersion
• Tyres: 215/75 R17.5
Your advantages:
• Low loading and construction height
• Optimal corrosion protection thanks to hot-dip galvanizing by immersion
• Safe loading and unloading with supports at the loading ramps
• Easy and lightweight handling of the aluminium loading ramps
• Ideal load securing options thanks to standard lashing points
• Steplessly height-adjustable drawbar for compatibility with various coupling heights of towing vehicles
• Low unladen weight = high payload
=> Delivery freight costs: €2.90 plus VAT per km
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Prior sale and changes reserved!*
*Price valid ex works D-86368 Gersthofen*
*Sale to commercial customers only!*
küçük ilan
Kaltenkirchen
2.524 km
Alçak yükleyici
HumbaurHumbaur 3-Achser Tieflader Parabelfederung, 12-24V-LED+Zink+Warnp.
Ara
Durumu: yeni, azami yük ağırlığı: 24.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.550 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 880 mm, Donanım: ABS, merkez döner tabla, tır çekici bağlantısı, HUMBAUR 3-Axle Turntable Low Loader with Drop Deck/High Plateau, Type HTD309525-K – PARABOLIC SUSPENSION – V2
---
INCLUDED:
- Chassis frame and turntable, fully hot-dip galvanized
- Parabolic suspension with rear axle compensation unit
- ABS braking system (suitable for tractor and truck)
- 12 & 24 Volt LED multi-voltage lighting system
- Warning package and revolving beacon light
Equipment:
* 24 months warranty
* Permissible gross weight: 30,000 kg
* Payload approx. 24,000 kg
* Chassis frame and turntable fully hot-dip galvanized
* Parabolic suspension with rear axle compensation unit
* ABS braking system (suitable for tractor and truck)
* 12 & 24 Volt LED multi-voltage lighting system, 15-pin 24 V connector and 13-pin adapter
* Load height approx. 880 mm
* Tires: 235/75R17.5 – 12-ply
* Low-loading platform 6,500 mm incl. ramp incline
* B-dimension: 10,760 mm
* Drawbar with 8° inclined towing eye Ø 40 mm, height adjustable
* 3-position drawbar mount for various truck coupling heights
* 3 pairs of 10 t lashing rings, recessed into low bed
* 2 pairs of 10 t lashing rings, recessed into high bed
* 4 pairs of 3 t lashing points on outer frame of low bed
* 4 pairs of 2 t lashing points above wheel cutouts of 2nd and 3rd axle
* Chassis frame and turntable fully hot-dip galvanized
* One-piece ramps approx. 3150 x 750 mm with spring assist and mechanical lateral adjustment
* Approach angle approx. 10-11°
* Softwood decking for loading platform and ramps
* Rear pendulum support legs
Kedpjkn N R Esfx Aa Njdw
* Climbing strips welded onto ramp incline
* 30,000 kg gross weight only permissible with special approval according to §70
* Brake connections: red/yellow
* Warning package and revolving beacon light
---
Modular design allows easy retrofitting of 3 m folding extensions, tool box in the high bed, plank box under the loading platform, etc.
---
*Stock unit – available immediately
*Subject to prior sale
*Ex works price
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHS 654520 BS BAUMASCHINENTRANSPORTER
Ara
Durumu: yeni, boş ağırlık: 1.700 kg, azami yük ağırlığı: 4.800 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2023, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 330 mm, süspansiyon: diğer, lastik boyutu: 215/75 r17,5 zoll, dingil mesafesi: 850 mm, Üretim yılı: 2023, HUMBAUR Construction Machinery Tandem Low-Loader HS 654520 BS
Kdsdpfx Aaehmm Rrj Nsw
INCLUDES ALUMINIUM loading ramps at the rear
HOT-DIP GALVANIZED CHASSIS FRAME
Specification:
• Permissible gross weight: 6,500 kg
• Payload: approx. 4,800 kg
• Loading area: approx. 4,500 x 2,000 mm
• Loading ramps made of ALUMINIUM
• Continuously height-adjustable drawbar
• Automatic jockey wheel
• 6 pcs. 3 t lashing rings (in the corners)
• 10 pcs. 2 t tie-down points recessed in the outer frame
• 2 adjustable support legs at the loading ramps
• Dual-circuit air brake system with ABS
• Steel plate mudguards
• Softwood plank bed floor
• Chassis frame hot-dip galvanized in immersion bath
• Tyres: 215/75 R17.5
Your benefits:
• Low loading deck/overall height
• Optimum corrosion protection thanks to hot-dip galvanizing
• Safe loading and unloading via supports on the loading ramps
• Easy and lightweight handling of the aluminium loading ramps
• Ideal load securing with standard lashing options
• Continuously height-adjustable drawbar provides compatibility with various coupling heights of towing vehicles
• Low unladen weight for high payload capacity
=> Delivery freight costs: €2.90 plus VAT per km
=> Prices ex works from D-86368 Gersthofen
Your direct contact:
Mr. Hirn Tel.
DOLL FAHRZEUGBAU
*Subject to prior sale and changes!*
*Price valid ex works D-86368 Gersthofen*
*Sale to business customers only!*
küçük ilan
Kaltenkirchen
2.524 km
Alçak yükleyici
HumbaurHumbaur 3-Achser Tieflader Parabelfederung, LED+Zink+Warnp+3mPaket
Ara
Durumu: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.550 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 880 mm, Donanım: ABS, merkez döner tabla, tır çekici bağlantısı, HUMBAUR 3-axle turntable low loader with stepped loading platform/high deck, Model HTD309525-K – PARABOLIC SUSPENSION – V2-Plus
---
INCLUDED:
- Chassis frame and turntable, hot-dip galvanized by immersion
- Parabolic suspension with rear axle equalization unit
- ABS braking system (suitable for tractors and trucks)
- 12 & 24 Volt LED multi-voltage lighting system
- Warning package and rotating beacon
- Stake pockets & lashing package
- Storage box at the front of the platform with folding lid
- 3-metre package with storage compartment
Equipment:
* 24 months warranty
* Permissible gross weight 30,000 kg
* Payload approx. 23,500 kg
* Chassis frame and turntable, hot-dip galvanized by immersion
* Parabolic suspension with rear axle equalization unit
* ABS braking system (suitable for tractors and trucks)
* 12 & 24 Volt LED multi-voltage lighting, 15-pin 24V connector and 13-pin adapter
* Loading height approx. 880 mm
* Tyres 235/75R17.5 – 12 units
* Low-loader platform 6,500 mm including drive-on slope
* 'B' dimension 10,760 mm
* Drawbar with 8° inclined towing eye Ø 40mm, height-adjustable
Kdodpfokn N S Ajx Aa Nsw
* Triple drawbar coupling for various truck coupling heights
* Storage box at the front of the platform with folding lid
* 3 pairs of 10t recessed lashing rings in the low-bed section
* 2 pairs of 10t recessed lashing rings in the high-bed section
* 4 pairs of 3t lashing points in the outer frame (low-bed)
* 3 pairs of 6t screw-on lashing eyes on the outer frame
* 4 pairs of 2t lashing points above the wheel cut-out of the 2nd and 3rd axle
* 6 pairs of stake pockets in the outer frame (stake pocket package)
* Chassis frame and turntable, hot-dip galvanized by immersion
* One-piece ramps approx. 3,150 x 750 mm with spring lift and manual lateral adjustment
* Drive-on angle approx. 10-11°
* Softwood flooring for platform and ramps
* Pendulum support legs at the rear
* 3-metre widening package with folding outriggers, wooden planks
* Steel toolbox under the platform, lockable, with storage compartment for planks, mounted laterally under the platform
* Climbing strips welded to the drive-on slope
* 30,000 kg GVW only with exemption permit per §70
* Brake connections: red/yellow
* Warning package and rotating beacon
---
Optional variants at extra cost:
* V2 Plus with hydraulic ramp assist = €1,000 net surcharge
* V2 PlusPlus (spring assist) with excavator trough = €700 net surcharge
* V2 PlusPlus with hydraulic ramp assist & excavator trough = €1,700 net surcharge
---
* Stock vehicle – available immediately
* Subject to prior sale
* Ex works price
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
Humbaur3-ACHS-TIEFLADER HTD 30-K V5
Ara
Durumu: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 23.350 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.540 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2024, Donanım: ABS, merkez döner tabla, 3-axle low loader
=> Full air suspension (front and rear)
=> Hot-dip galvanized
Gross vehicle weight: 30,000 kg
Payload: approx. 23,350 kg
Chassis frame hot-dip galvanized by immersion bath
Kdsdpfx Aohmm N Uja New
Air suspension
SAF axle with drum brake
EBS electronic braking system
Tyres: 235/75R17.5 – 12 units
Low-bed length: approx. 6,500 mm
3 pairs of 10 t lashing rings recessed in the low-bed
2 pairs of 10 t lashing rings recessed in the high-bed
4 pairs of 3 t lashing points on the outer frame
3 pairs of 6 t lashing eyes on the outer frame
6 pairs of stanchion pockets 90 x 50 mm in the outer frame
Storage box front top on the platform, with folding lid
3-metre widening kit without chamfer, with folding outriggers
Spring ramp lifter
4 warning panels
Rotating beacon
Storage compartment under the loading area
1-piece ramps, approx. 3,150 x 750 mm
Softwood decking for loading area and ramps
Extras available if required:
Hydraulic ramp lifter €2,690.00 + VAT
=> Delivery freight costs: €2.90 plus VAT per km
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and modifications!*
*Price valid ex works D-86368 Gersthofen*
*Sale to business customers only!*
*Images may differ and are for general guidance only – may show/accessorize items at extra cost*
küçük ilan
Kaltenkirchen
2.524 km
Alçak yükleyici
HumbaurHumbaur 4-Achs-Tieflader Baggerstielmulde, Luftfederung
Ara
Durumu: yeni, azami yük ağırlığı: 31.300 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.130 mm, yükleme alanı genişliği: 3.000 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, Donanım: ABS, merkez döner tabla, tır çekici bağlantısı, Humbaur HTD40-K V20
Permissible total weight: 40,000 kg
Payload approx. 31,350 kg
Chassis frame hot-dip galvanized by immersion
Turntable frame hot-dip galvanized by immersion
Loading ramps hot-dip galvanized by immersion
Air suspension with manual rear lowering
SAF axle with drum brake
EBS electronic braking system
Tyres: 235/75R17.5 – 16-ply
Kdsdpfx Askn N Susa Now
Low bed length approx. 7,160 mm
Trough for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at the rear of the low bed
4 pairs of recessed lashing rings (10 t) in the low bed
2 pairs of recessed lashing rings (10 t) in the high bed
4 pairs of lashing points (3 t) on the outer frame of the low bed
3 pairs of lashing eyes (6 t) on the outer frame
4 pairs of stake pockets on the outer frame of the high bed
4 pairs of stake pockets on the outer frame of the low bed
3-metre widening package with fold-out outriggers, no bevel
4 x warning signs with lighting
Rear-mounted rotating beacon
Storage compartment under the loading area
2 storage compartments with foldable lids on the high platform
Hydraulic ramp lifters
Single-piece ramps approx. 3,150 x 750 mm
Softwood flooring for loading area and ramps
40,000 kg permissible total weight only with special permit according to §70
*Stock vehicle – immediately available
*Interim sale reserved
*Price ex works
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
Humbaur4-Achs-Tieflader HTD 40 V 20 FEUERVERINKT+LUFTGEFEDERT
Ara
Durumu: kullanılmış, boş ağırlık: 8.700 kg, azami yük ağırlığı: 31.300 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.740 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2023, Donanım: ABS, merkez döner tabla, 4-AXLE LOW-LOADER IN TOP CONFIGURATION!
=> HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS)
=> FULL AIR SUSPENSION
=> WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!)
=> SAF LOW-LOADER AXLES
=> LASHING RING PACKAGE
=> PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS
=> ANTI-SLIP STRIPS AT THE REAR SLOPE OF THE RAMPS
=> 6 LASHING POINTS IN THE EXCAVATOR ARM WELL AT THE REAR
=> LONG, ONE-PIECE LOADING RAMPS
=> LOW APPROACH ANGLE
Permissible gross weight: 40,000 kg
Payload approx. 31,350 kg
Chassis frame hot-dip galvanized in immersion bath
Bogie frame hot-dip galvanized in immersion bath
Loading ramps hot-dip galvanized in immersion bath
Air suspension
SAF axles with drum brakes
EBS electronic braking system
235/75R17.5 tyres – 16 units
Low-bed length approx. 7,160 mm
Excavator arm well, approx. 3,000 mm x 730 mm x 180 mm at the rear low-bed
4 pairs of 10 t lashing rings recessed in low-bed
2 pairs of 10 t lashing rings recessed in the upper bed
4 pairs of 3 t lashing points on the outer frame of the low-bed
3 pairs of 6 t lashing eyes on the outer frame
4 pairs of stanchion pockets in the outer frame upper bed
4 pairs of stanchion pockets in the outer frame low-bed
3-metre widening kit with folding outriggers, no slope
4 x illuminated warning signs
Kdsdpfjhvxgzox Aa Now
Rotating beacon at the rear
LARGE STEEL TOOL BOX under the loading surface
2 storage compartments with hinged lids in the upper deck
Hydraulic ramp lifters
Single-piece ramps approx. 3,150 x 750 mm
Softwood flooring for platform and ramps
40,000 kg gross weight only with exemption permit per §70
=> Delivery charges: EUR 2.90 plus VAT per km
=> Prices ex D-86368 Gersthofen
Your direct contact:
Mr. Hauptmann Tel.
DOLL Fahrzeugbau
*Subject to prior sale and specification changes!*
*Price valid ex D-86368 Gersthofen*
*Sale to business customers only!*
*Images may differ and are for general reference only. May display optional accessories which are available at extra cost*
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHBTZ 136224 BS abgeschrägt
Ara
Durumu: yeni, boş ağırlık: 3.600 kg, azami yük ağırlığı: 10.000 kg, toplam ağırlık: 13.600 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.250 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 400 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5 zoll, dingil mesafesi: 990 mm, Üretim yılı: 2024, Donanım: ABS, HUMBAUR Construction Machinery Transporter Tandem Flatbed Trailer
REAR LOADING AREA BEVELLED
HBT 116224BS / Hot-dip galvanized / Aluminum drop sides
Chassis frame hot-dip galvanized in immersion bath
Drop sides anodized aluminum
Features:
• Tandem low-loader (construction machinery / material transporter)
• Loading area bevelled in rear section
• Permissible gross weight: 11,900 kg
• Payload approx. 9,010 kg
• Loading area approx. 6,200 x 2,460 mm
• Platform floor made of approx. 40 mm softwood planks
• Aluminum drop sides, 400 mm high, anodized
• Reinforced 25 t gear support winch with load and quick modes
• Fixed drawbar
• Coupling height approx. 750–1,000 mm
• 3 pairs of recessed 3 t lashing rings (3,000 daN)
• 6 pairs of recessed 1 t lashing points (1,000 daN) in the outer frame
• 2 telescopic folding supports at rear of vehicle
• ABS dual-circuit compressed air brake system
• One-piece drive-on ramps, hot-dip galvanized, approx. 2,400 mm long and approx. 520 mm wide, with galvanized STEEL GRATING SURFACE
• Mudguards
Kdedpfehmm Rkex Aa Now
• Anti-spray system
• 40 mm Ø DIN towing eye
• Aluminum side underrun protection
• Drive-on angle only approx. 16°
• Unloaded loading height only approx. 920 mm
Optional extras available at additional cost:
• Plastic toolbox under the loading area
• Surcharge: €290 plus VAT
=> Delivery freight costs: €2.90 plus VAT per km
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hirn Tel.
DOLL COMMERCIAL VEHICLE MANUFACTURING
*Subject to prior sale and changes!*
*Price valid ex works D-86368 Gersthofen*
*Sale only to business customers!*
*Images may differ and are for general guidance only => may contain/show optional extras at additional cost*
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
HumbaurHS 115020 BS / SMB / Baumaschinentransporter
Ara
Durumu: yeni, boş ağırlık: 2.500 kg, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 250 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5 zoll, dingil mesafesi: 990 mm, Üretim yılı: 2024, Donanım: ABS, Construction Machinery Tandem Low Loader HS 115020BS
HOT-DIP GALVANIZED
Equipment:
• Permissible total weight: 11,900 kg
• Payload: approx. 9,410 kg
• Loading area: approx. 5,000 x 2,010 mm
• Drive-on ramps with grating surface, hot-dip galvanized
• Fixed drawbar
• Reinforced 25 t gearbox support winch with load and quick mode (no jockey wheel!)
• 2 pairs of recessed 6 t lashing rings (in the corners)
• 5 pairs of recessed lashing brackets in the outer frame (2,000 daN per pair)
• 2 folding supports at the rear of the vehicle
• ABS braking system
• Steel mudguards, hot-dip galvanized
• Platform floor with wooden decking
• Chassis frame incl. bodywork hot-dip galvanized by immersion
=> Freight costs for delivery: €2.90 plus VAT per km
=> Prices are ex-works D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL FAHRZEUGBAU
*Subject to prior sale and changes!*
*Price valid ex-works D-86368 Gersthofen*
*Sale to business customers only!*
Kdodshmm Rnepfx Aa Njw
*Images may vary and are for illustrative purposes only – they may show or include optional equipment at extra cost*
küçük ilan
Nürnberg
2.232 km
Alçak yükleyici römork
Humbaur4-Achs-Tieflader HTD 40K- mit Radmulden
Ara
Durumu: yeni, boş ağırlık: 8.650 kg, azami yük ağırlığı: 31.350 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 4x2, yükleme alanı uzunluğu: 9.220 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, Üretim yılı: 2025, Donanım: ABS, merkez döner tabla, tır çekici bağlantısı, HTD 40K-RM-BM_2022
Technical Specifications:
Internal dimensions: approx. 9,220 mm x 2,540 mm x 0 mm
Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm
Permissible total weight: 24,000 kg
Payload: approx. 15,350 kg
Tyres: 235/75R17.5 inches
Loading height: approx. 900 mm
Drawbar length: approx. 1,500 mm
Coupling height: approx. 820-1,000 mm
Ramp angle: approx. 10°
Ramp length: approx. 3,150 mm
Ramp width: approx. 750 mm
Permissible total weight (special approval): 40,000 kg
Payload (special approval): approx. 31,350 kg
Lowbed length: approx. 6,610 mm
Overall dimensions (LxWxH): 11,200
Total weight (technical): approx. 44,000 kg
Technical axle load: approx. 11,000 kg
4 pairs of lashing points, 10,000 kg per lashing point
Recessed lashing rings in the lowbed
3 pairs of lashing points, 10,000 kg per lashing point
4 pairs of lashing points, 2,000 kg per lashing point over wheel recesses 3rd & 4th axle
Lashing points on the outer frame of the lowbed
Standard Equipment:
Axles
Low-loader axles from well-known manufacturers
Kdsdpfx Aasiciuts New
Tyres
Tyres as per manufacturer's choice
Suspension
Air suspension unit including lifting and lowering, acting on rear axle assembly
Braking system
Braking system in accordance with EC guidelines with EBS 4S/3M (multivoltage 12-24V), spring-loaded parking brake incl. 2 externally accessible test connections for brake/modulator and bellows pressure
Electrics
LED lighting with indicator function for side marker lights, multivoltage (12-24V)
Turntable
Heavy-duty welded construction with low-maintenance ball bearing turntable
Drawbar
Offset drawbar with Ø 50mm towing eye, low-maintenance silent bushings, including height adjustment for drawbar
Chassis
Heavy-duty welded construction made of high-tensile fine-grain steel, uninterrupted crossmembers for maximum stability
Wheel wells at the front (approx. 2,500 mm top length, approx. 410 mm depth) and rear (approx. 1,470 mm top length, approx. 370 mm depth); without wheel well covers;
Excavator trough (length 1,650mm, width 750mm, depth 190mm)
Wheel cutouts above rear wheels with 2,010 mm wheelbase, front corners sloped, rear climbing strips at the ramp angle for max. safety during loading and unloading
Floor
50 mm softwood floor (painted/impregnated)
Ramps
One-piece hot-dip galvanized loading ramps (3,150mm x 750mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable; directly acting upright spring lift for easiest handling; optimal securing with turnbuckle and counter stop
Corrosion protection
Chassis frame hot-dip galvanized in immersion bath
Support
2 folding supports at rear left and right of vehicle
Equipment
Foldable side underrun protection,
front half-round plastic mudguards - rear straight steel mudguards with antispray,
2 wheel chocks with holder; contour marking according to ECE Regulation R48
=> AND MORE.
=> Freight costs for delivery: €2.90 plus VAT per km
=> Prices are ex D-86368 - Gersthofen
Your direct contact:
Mr. Hirn Tel. 0911/830504
DOLL FAHRZEUGBAU
*Subject to prior sale and changes!*
*Price valid ex D-86368 - Gersthofen*
*Images may differ and are for general guidance only => may show/contain accessories at extra cost*
küçük ilan
Nürnberg
2.232 km
İnşaat makineleri için alçak yükleyici römorklar
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Ara
Durumu: yeni, boş ağırlık: 10.650 kg, azami yük ağırlığı: 39.350 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.830 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2025, Donanım: ABS, merkez döner tabla, 5-AXLE SWING BOGIE LOWBED TRAILER, HOT-DIP GALVANIZED
=> FULL AIR SUSPENSION
=> HOT-DIP GALVANIZED
Kedpfx Ashmm Rcea Njdw
IN TOP CONFIGURATION!!!!
* AS LIFT AXLE
* AS SELF-STEERING FOLLOWING AXLE
• SAF – LOWBED AXLES
• AIR SUSPENSION
• ONE-PIECE LONG LOADING RAMPS
• HYDRAULIC RAMP LIFTER
• HYDRAULIC REAR SUPPORTS
• HYDRAULIC SIDE SHIFTING
• HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE
• EXCAVATOR ARM TROUGH
• CHASSIS AND BOGIE FRAME HOT-DIP GALVANIZED
• OUTER FRAME ADDITIONALLY PAINTED IN RED
• LOADING RAMPS HOT-DIP GALVANIZED
• 10 t RECESSED LASHING POINTS IN LOADING PLATFORM
• 3 t LASHING POINTS IN OUTER FRAME (High Deck)
• 6 t LASHING POINTS IN OUTER FRAME (Lowbed)
• 4 pairs of 3 t lashing points in outer frame (Lowbed)
• LASHING POINTS IN EXCAVATOR ARM TROUGH
• 3-METER WIDENING PACKAGE
• FOLD-OUT EXTENSIONS
• WOODEN PLANKS IN STEEL BOX UNDER LOADING PLATFORM
• SECOND STEEL STORAGE BOX UNDER LOADING PLATFORM
• WARNING SIGNS
• REAR BEACON LIGHT
• REAR STEPS
• 2 STORAGE BOXES IN HIGH DECK
• DIGITAL AXLE LOAD DISPLAY
• WABCO SMARTBOARD
• AIR SUSPENSION
• LIFT-AND-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING AND UNLOADING)
• STAKE POCKETS IN OUTER FRAME
• TWO STAKE POCKETS INCLUDING DROP-IN STAKES AT FRONT END
• EBS - ELECTRONIC BRAKING SYSTEM
B-DIMENSION = approx. 11,790 MM
=> Freight cost for delivery: €2.90 plus VAT per km
=> Prices ex D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and changes!*
*Price valid ex D-86368 Gersthofen*
*Sale only to business customers!*
*Images may deviate and are for general guidance only – may include/show accessories for extra charge*
Sizin için aramayı kolaylaştırıyoruz: "humbaur alçak yükleyici"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Humbaur Alçak Yükleyici (576)
Şimdi 120.000’dan fazla ikinci el araçla TruckScout24 genelinde arama yapın.En popüler kategorileri inceleyin:
- Alçak Yükleyici
- Blumhardt Alçak Yükleyici
- Broshuis Alçak Yükleyici
- Demmler Alçak Yükleyici
- Fruehauf Alçak Yükleyici
- Goldhofer Alçak Yükleyici
- Hangler Alçak Yükleyici
- Hapert Alçak Yükleyici
- Hrd Alçak Yükleyici












































































































































































































































